I'm looking for real world examples of needing read and write access to the same value in concurrent systems.
In my opinion, many semaphores or locks are present because there's no known alternative (to the implementer,) but do you know of any patterns where mutexes seem to be a requirement?
In a way I'm asking for candidates for the standard set of HARD problems for concurrent software in the real world.
What kind of locks are used depends on how the data is being accessed by multiple threads. If you can fine tune the use case, you can sometimes eliminate the need for exclusive locks completely.
An exclusive lock is needed only if your use case requires that the shared data must be 100% exact all the time. This is the default that most developers start with because that's how we think about data normally.
However, if what you are using the data for can tolerate some "looseness", there are several techniques to share data between threads without the use of exclusive locks on every access.
For example, if you have a linked list of data and if your use of that linked list would not be upset by seeing the same node multiple times in a list traversal and would not be upset if it did not see an insert immediately after the insert (or similar artifacts), you can perform list inserts and deletes using atomic pointer exchange without the need for a full-stop mutex lock around the insert or delete operation.
Another example: if you have an array or list object that is mostly read from by threads and only occasionally updated by a master thread, you could implement lock-free updates by maintaining two copies of the list: one that is "live" that other threads can read from and another that is "offline" that you can write to in the privacy of your own thread. To perform an update, you copy the contents of the "live" list into the "offline" list, perform the update to the offline list, and then swap the offline list pointer into the live list pointer using an atomic pointer exchange. You will then need some mechanism to let the readers "drain" from the now offline list. In a garbage collected system, you can just release the reference to the offline list - when the last consumer is finished with it, it will be GC'd. In a non-GC system, you could use reference counting to keep track of how many readers are still using the list. For this example, having only one thread designated as the list updater would be ideal. If multiple updaters are needed, you will need to put a lock around the update operation, but only to serialize updaters - no lock and no performance impact on readers of the list.
All the lock-free resource sharing techniques I'm aware of require the use of atomic swaps (aka InterlockedExchange). This usually translates into a specific instruction in the CPU and/or a hardware bus lock (lock prefix on a read or write opcode in x86 assembler) for a very brief period of time. On multiproc systems, atomic swaps may force a cache invalidation on the other processors (this was the case on dual proc Pentium II) but I don't think this is as much of a problem on current multicore chips. Even with these performance caveats, lock-free runs much faster than taking a full-stop kernel event object. Just making a call into a kernel API function takes several hundred clock cycles (to switch to kernel mode).
Examples of real-world scenarios:
producer/consumer workflows. Web service receives http requests for data, places the request into an internal queue, worker thread pulls the work item from the queue and performs the work. The queue is read/write and has to be thread safe.
Data shared between threads with change of ownership. Thread 1 allocates an object, tosses it to thread 2 for processing, and never wants to see it again. Thread 2 is responsible for disposing the object. The memory management system (malloc/free) must be thread safe.
File system. This is almost always an OS service and already fully thread safe, but it's worth including in the list.
Reference counting. Releases the resource when the number of references drops to zero. The increment/decrement/test operations must be thread safe. These can usually be implemented using atomic primitives instead of full-stop kernal mutex locks.
Most real world, concurrent software, has some form of requirement for synchronization at some level. Often, better written software will take great pains to reduce the amount of locking required, but it is still required at some point.
For example, I often do simulations where we have some form of aggregation operation occurring. Typically, there are ways to prevent locking during the simulation phase itself (ie: use of thread local state data, etc), but the actual aggregation portion typically requires some form of lock at the end.
Luckily, this becomes a lock per thread, not per unit of work. In my case, this is significant, since I'm typically doing operations on hundreds of thousands or millions of units of work, but most of the time, it's occuring on systems with 4-16 PEs, which means I'm usually restricting to a similar number of units of execution. By using this type of mechanism, you're still locking, but you're locking between tens of elements instead of potentially millions.
Related
I have a shared data structure that is read in one thread and modified in another thread. However, its data changes very occasionally. Most of time, it is read by the thread. I now have a Mutex (or RW lock) locked before read/write and unlocked after read/write.
Because the data rarely changes, lock-unlock every time it is read seems inefficient. If no change is made to the data, I can get rid of the lock because only read to the same structure can run simultaneously without lock.
My question is:
Is there a lock-free solution that allows me changes the data without a lock?
Or, the lock-unlock in read (one thread, in other words, no contention) don't take much of time/resources (no enter to the kernel) at all?
If there's no contention, not kernel call is needed, but still atomic lock acquisition is needed. If the resource is occupied for a short period of time, then spinning can be attempted before kernel call.
Mutex and RW lock implementations, such as (an usual quality implementation of) std::mutex / std::shared_mutex in C++ or CRITICAL_SECTION / SRW_LOCK in Windows already employ above mentioned techniques on their own. Linux mutexes are usually based on futex, so they also avoid kernel call when it its not needed. So you don't need to bother about saving a kernel call yourself.
And there are alternatives to locking. There are atomic types that can be accessed using lock-free reads and writes, they can always avoid lock. There are other patterns, such as SeqLock. There is transaction memory.
But before going there, you should make sure that locking is performance problem. Because use of atomics may be not simple (although it is simple for some languages and simple cases), and other alternatives have their own pitfalls.
An uncontrolled data race may be dangerous. Maybe not. And there may be very thin boundary between cases where it is and where it is not. For example, copying a bunch of integer could only result in garbage integers occasionally obtained, if integers are properly sized and aligned, then there may be only a mix up, but not garbage value of a single integer, and if you add some more complex type, say string, you may have a crash. So most of the times uncontrolled data race is treated as Undefined Behavior.
I have a vector of entities. At update cycle I iterate through vector and update each entity: read it's position, calculate current speed, write updated position. Also, during updating process I can change some other objects in other part of program, but each that object related only to current entity and other entities will not touch that object.
So, I want to run this code in threads. I separate vector into few chunks and update each chunk in different threads. As I see, threads are fully independent. Each thread on each iteration works with independent memory regions and doesn't affect other threads work.
Do I need any locks here? I assume, that everything should work without any mutexes, etc. Am I right?
Short answer
No, you do not need any lock or synchronization mechanism as your problem appear to be a embarrassingly parallel task.
Longer answer
A race conditions that can only appear if two threads might access the same memory at the same time and at least one of the access is a write operation. If your program exposes this characteristic, then you need to make sure that threads access the memory in an ordered fashion. One way to do it is by using locks (it is not the only one though). Otherwise the result is UB.
It seems that you found a way to split the work among your threads s.t. each thread can work independently from the others. This is the best case scenario for concurrent programming as it does not require any synchronization. The complexity of the code is dramatically decreased and usually speedup will jump up.
Please note that as #acelent pointed out in the comment section, if you need changes made by one thread to be visible in another thread, then you might need some sort of synchronization due to the fact that depending on the memory model and on the HW changes made in one thread might not be immediately visible in the other.
This means that you might write from Thread 1 to a variable and after some time read the same memory from Thread 2 and still not being able to see the write made by Thread 1.
"I separate vector into few chunks and update each chunk in different threads" - in this case you do not need any lock or synchronization mechanism, however, the system performance might degrade considerably due to false sharing depending on how the chunks are allocated to threads. Note that the compiler may eliminate false sharing using thread-private temporal variables.
You can find plenty of information in books and wiki. Here is some info https://software.intel.com/en-us/articles/avoiding-and-identifying-false-sharing-among-threads
Also there is a stackoverflow post here does false sharing occur when data is read in openmp?
In a multi-threading environment, isn’t it that every operation on the RAM must be synchronized?
Let’s say, I have a variable, which is a pointer to another memory address:
foo 12345678
Now, if one thread sets that variable to another memory address (let’s say 89ABCDEF), meanwhile the first thread reads the variable, couldn’t it be that the first thread reads totally trash from the variable if access wouldn’t be synchronized (on some system level)?
foo 12345678 (before)
89ABCDEF (new data)
••••• (writing thread progress)
89ABC678 (memory content)
Since I never saw those things happen I assume that there is some system level synchronization when writing variables. I assume, that this is why it is called an ‘atomic’ operation. As I found here, this problem is actually a topic and not totally fictious from me.
On the other hand, I read everywhere that synchronizing has a significant impact on performance. (Aside from threads that must wait bc. they cannot enter the lock; I mean just the action of locking and unlocking.) Like here:
synchronized adds a significant overhead to the methods […]. These operations are quite expensive […] it has an extreme impact on the program performance. […] the expensive synchronized operations that cause the code to be so terribly slow.
How does this go together? Why is locking for changing a variable unnoticeable fast, but locking for anything else so expensive? Or, is it equally expensive, and there should be a big warning sign when using—let’s say—long and double because they always implicitly require synchronization?
Concerning your first point, when a processor writes some data to memory, this data is always properly written and cannot be "trashed" by other writes by threads processes, OS, etc. It is not a matter of synchronization, just required to insure proper hardware behaviour.
Synchronization is a software concept that requires hardware support. Assume that you just want to acquire a lock. It is supposed to be free when at 0 et locked when at 1.
The basic method to do that is
got_the_lock=0
while(!got_the_lock)
fetch lock value from memory
set lock value in memory to 1
got_the_lock = (fetched value from memory == 0)
done
print "I got the lock!!"
The problem is that if other threads do the same thing at the same time and read lock value before it has been set to 1, several threads may think they got the lock.
To avoid that, one need atomic memory access. An atomic access is typically a read-modify-write cycle to a data in memory that cannot interrupted and that forbids access to this information until completion. So not all accesses are atomic, only specific read-modify-write operation and it is realized thanks tp specific processor support (see test-and-set or fetch-and-add instructions, for instance). Most accesses do not need it and can be a regular access. Atomic access is mostly use to synchronize threads to insure that only one thread is in a critical section.
So why are atomic access expensive ? There are several reasons.
The first one is that one must ensure a proper ordering of instructions. You probably know that instruction order may be different from instruction program order, provided the semantic of the program is respected. This is heavily exploited to improve performances : compiler reorder instructions, processor execute them out-of-order, write-back caches write data in memory in any order, and memory write buffer do the same thing. This reordering can lead to improper behavior.
1 while (x--) ; // random and silly loop
2 f(y);
3 while(test_and_set(important_lock)) ; //spinlock to get a lock
4 g(z);
Obviously instruction 1 is not constraining and 2 can be executed before (and probably 1 will be removed by an optimizing compiler). But if 4 is executed before 3, the behavior will not be as expected.
To avoid that, an atomic access flushes the instruction and memory buffer that requires tens of cycles (see memory barrier).
Without pipeline, you pay the full latency of the operation: read data from memory, modify it and write it back. This latency always happens, but for regular memory accesses you can do other work during that time that largely hides the latency.
An atomic access requires at least 100-200 cycles on modern processors and is accordingly extremely expensive.
How does this go together? Why is locking for changing a variable unnoticeable fast, but locking for anything else so expensive? Or, is it equally expensive, and there should be a big warning sign when using—let’s say—long and double because they always implicitly require synchronization?
Regular memory access are not atomic. Only specific synchronization instructions are expensive.
Synchronization always has a cost involved. And the cost increases with contention due to threads waking up, fighting for lock and only one gets it, and the rest go to sleep resulting in lot of context switches.
However, such contention can be kept at a minimum by using synchronization at a much granular level as in a CAS (compare and swap) operation by CPU, or a memory barrier to read a volatile variable. A far better option is to avoid synchronization altogether without compromising safety.
Consider the following code:
synchronized(this) {
// a DB call
}
This block of code will take several seconds to execute as it is doing a IO and therefore run high chance of creating a contention among other threads wanting to execute the same block. The time duration is enough to build up a massive queue of waiting threads in a busy system.
This is the reason the non-blocking algorithms like Treiber Stack Michael Scott exist. They do a their tasks (which we'd otherwise do using a much larger synchronized block) with the minimum amount of synchronization.
isn’t it that every operation on the RAM must be synchronized?
No. Most of the "operations on RAM" will target memory locations that are only used by one thread. For example, in most programming languages, None of a thread's function arguments or local variables will be shared with other threads; and often, a thread will use heap objects that it does not share with any other thread.
You need synchronization when two or more threads communicate with one another through shared variables. There are two parts to it:
mutual exclusion
You may need to prevent "race conditions." If some thread T updates a data structure, it may have to put the structure into a temporary, invalid state before the update is complete. You can use mutual exclusion (i.e., mutexes/semaphores/locks/critical sections) to ensure that no other thread U can see the data structure when it is in that temporary, invalid state.
cache consistency
On a computer with more than one CPU, each processor typically has its own memory cache. So, when two different threads running on two different processors both access the same data, they may each be looking at their own, separately cached copy. Thus, when thread T updates that shared data structure, it is important to ensure that all of the variables it updated make it into thread U's cache before thread U is allowed to see any of them.
It would totally defeat the purpose of the separate caches if every write by one processor invalidated every other processor's cache, so there typically are special hardware instructions to do that only when it's needed, and typical mutex/lock implementations execute those instructions on entering or leaving a protected block of code.
Hi I am writing kernel code which intends to do process scheduling and multi-threaded execution. I've studied about locking mechanisms and their functionality. Is there a thumb rule regarding what sort of data structure in critical section should be protected by locking (mutex/semaphores/spinlocks)?
I know that where ever there is chance of concurrency in part of code, we require lock. But how do we decide, what if we miss and test cases don't catch them. Earlier I wrote code for system calls and file systems where I never cared about taking locks.
Is there a thumb rule regarding what sort of data structure in critical section should be protected by locking?
Any object (global variable, field of the structure object, etc.), accessed concurrently when one access is write access requires some locking discipline for access.
But how do we decide, what if we miss and test cases don't catch them?
Good practice is appropriate comment for every declaration of variable, structure, or structure field, which requires locking discipline for access. Anyone, who uses this variable, reads this comment and writes corresponded code for access. Kernel core and modules tend to follow this strategy.
As for testing, common testing rarely reveals concurrency issues because of their low probability. When testing kernel modules, I would advice to use Kernel Strider, which attempts to prove correctness of concurrent memory accesses or RaceHound, which increases probability of concurrent issues and checks them.
It is always safe to grab a lock for the duration of any code that accesses any shared data, but this is slow since it means only one thread at a time can run significant chunks of code.
Depending on the data in question though, there may be shortcuts that are safe and fast. If it is a simple integer ( and by integer I mean the native word size of the CPU, i.e. not a 64 bit on a 32 bit cpu ), then you may not need to do any locking: if one thread tries to write to the integer, and the other reads it at the same time, the reader will either get the old value, or the new value, never a mix of the two. If the reader doesn't care that he got the old value, then there is no need for a lock.
If however, you are updating two integers together, and it would be bad for the reader to get the new value for one and the old value for the other, then you need a lock. Another example is if the thread is incrementing the integer. That normally involves a read, add, and write. If one reads the old value, then the other manages to read, add, and write the new value, then the first thread adds and writes the new value, both believe they have incremented the variable, but instead of being incremented twice, it was only incremented once. This needs either a lock, or the use of an atomic increment primitive to ensure that the read/modify/write cycle can not be interrupted. There are also atomic test-and-set primitives so you can read a value, do some math on it, then try to write it back, but the write only succeeds if it still holds the original value. That is, if another thread changed it since the time you read it, the test-and-set will fail, then you can discard your new value and start over with a read of the value the other thread set and try to test-and-set it again.
Pointers are really just integers, so if you set up a data structure then store a pointer to it where another thread can find it, you don't need a lock as long as you set up the structure fully before you store its address in the pointer. Another thread reading the pointer ( it will need to make sure to read the pointer only once, i.e. by storing it in a local variable then using only that to refer to the structure from then on ) will either see the new structure, or the old one, but never an intermediate state. If most threads only read the structure via the pointer, and any that want to write do so either with a lock, or an atomic test-and-set of the pointer, this is sufficient. Any time you want to modify any member of the structure though, you have to copy it to a new one, change the new one, then update the pointer. This is essentially how the kernel's RCU ( read, copy, update ) mechanism works.
Ideally, you must enumerate all the resources available in your system , the related threads and communication, sharing mechanism during design. Determination of the following for every resource and maintaining a proper check list whenever change is made can be of great help :
The duration for which the resource will be busy (Utilization of resource) & type of lock
Amount of tasks queued upon that particular resource (Load) & priority
Type of communication, sharing mechanism related to resource
Error conditions related to resource
If possible, it is better to have a flow diagram depicting the resources, utilization, locks, load, communication/sharing mechanism and errors.
This process can help you in determining the missing scenarios/unknowns, critical sections and also in identification of bottlenecks.
On top of the above process, you may also need certain tools that can help you in testing / further analysis to rule out hidden problems if any :
Helgrind - a Valgrind tool for detecting synchronisation errors.
This can help in identifying data races/synchronization issues due
to improper locking, the lock ordering that can cause deadlocks and
also improper POSIX thread API usage that can have later impacts.
Refer : http://valgrind.org/docs/manual/hg-manual.html
Locksmith - For determining common lock errors that may arise during
runtime or that may cause deadlocks.
ThreadSanitizer - For detecting race condtion. Shall display all accesses & locks involved for all accesses.
Sparse can help to lists the locks acquired and released by a function and also identification of issues such as mixing of pointers to user address space and pointers to kernel address space.
Lockdep - For debugging of locks
iotop - For determining the current I/O usage by processes or threads on the system by monitoring the I/O usage information output by the kernel.
LTTng - For tracing race conditions and interrupt cascades possible. (A successor to LTT - Combination of kprobes, tracepoint and perf functionalities)
Ftrace - A Linux kernel internal tracer for analysing /debugging latency and performance related issues.
lsof and fuser can be handy in determining the processes having lock and the kind of locks.
Profiling can help in determining where exactly the time is being spent by the kernel. This can be done with tools like perf, Oprofile.
The strace can intercept/record system calls that are called by a process and also the signals that are received by a process. It shall show the order of events and all the return/resumption paths of calls.
Back in my days as a BeOS programmer, I read this article by Benoit Schillings, describing how to create a "benaphore": a method of using atomic variable to enforce a critical section that avoids the need acquire/release a mutex in the common (no-contention) case.
I thought that was rather clever, and it seems like you could do the same trick on any platform that supports atomic-increment/decrement.
On the other hand, this looks like something that could just as easily be included in the standard mutex implementation itself... in which case implementing this logic in my program would be redundant and wouldn't provide any benefit.
Does anyone know if modern locking APIs (e.g. pthread_mutex_lock()/pthread_mutex_unlock()) use this trick internally? And if not, why not?
What your article describes is in common use today. Most often it's called "Critical Section", and it consists of an interlocked variable, a bunch of flags and an internal synchronization object (Mutex, if I remember correctly). Generally, in the scenarios with little contention, the Critical Section executes entirely in user mode, without involving the kernel synchronization object. This guarantees fast execution. When the contention is high, the kernel object is used for waiting, which releases the time slice conductive for faster turnaround.
Generally, there is very little sense in implementing synchronization primitives in this day and age. Operating systems come with a big variety of such objects, and they are optimized and tested in significantly wider range of scenarios than a single programmer can imagine. It literally takes years to invent, implement and test a good synchronization mechanism. That's not to say that there is no value in trying :)
Java's AbstractQueuedSynchronizer (and its sibling AbstractQueuedLongSynchronizer) works similarly, or at least it could be implemented similarly. These types form the basis for several concurrency primitives in the Java library, such as ReentrantLock and FutureTask.
It works by way of using an atomic integer to represent state. A lock may define the value 0 as unlocked, and 1 as locked. Any thread wishing to acquire the lock attempts to change the lock state from 0 to 1 via an atomic compare-and-set operation; if the attempt fails, the current state is not 0, which means that the lock is owned by some other thread.
AbstractQueuedSynchronizer also facilitates waiting on locks and notification of conditions by maintaining CLH queues, which are lock-free linked lists representing the line of threads waiting either to acquire the lock or to receive notification via a condition. Such notification moves one or all of the threads waiting on the condition to the head of the queue of those waiting to acquire the related lock.
Most of this machinery can be implemented in terms of an atomic integer representing the state as well as a couple of atomic pointers for each waiting queue. The actual scheduling of which threads will contend to inspect and change the state variable (via, say, AbstractQueuedSynchronizer#tryAcquire(int)) is outside the scope of such a library and falls to the host system's scheduler.