In Firefox, if a user enters words which have spelling mistakes, the browser puts a line below the word indicating a spelling mistake. How can the same be accomplished in IE ? Any ideas ?
Given the clarification in the comments, that you want a Javascript spellcheck engine for IE...
Then the first few results for googling javascript spell check might be what you are looking for. These give solutions like in Gmail's editor - the little red underline in Firefox/Chrome are the browser's built-in spell checkers.
Spell as you type plug-in for jQuery.
Related
Ive been trying to get the VIM auto completion working, but am running into issues unfortunately.
Right now I tried just starting with the basics. trying to get the auto completion to work on HTML documents first. But even this is becoming an issue.
I set the correct DOCTYPE, and have even specified different ones to see if it will work on Transitional, or Strict, or even XHTML or HTML5, but none are seeming to work.
The htmlcomplete.vim file is indeed in the "autoload" directory.
In my vimrc file, the correct setting is applied:
filetype plugin indent on
But still this isn't working, and no amount of research is helping me, because the only relevant results are issues with C++ auto completion, in VIM. (which vim does not fully support at this time, but it DOES support HTML auto completion, as I know because I have had it work on multiple instances of different systems before.)
What do you guys think I should do next? Im not sure where I should go from here..
No matter what, when I use the "omni completion" option. AKA (Ctrl+X, Ctrl+O), it always says:
Omni Completion (^O^N^P) Pattern not found
The syntax highlighting works by default without even using:
:syntax on/:syntax enable
it just recognizes by the filetype as it should. so that works.
The indentation has started working ever since I uncommented the "filetype plugin indent on". but I just cant get this to work correctly.
But maybe, I am missing the point here, and thinking about this the wrong way. So please correct me if I am wrong.
What function I am looking for, is when I type "<" it will automatically bring up a drop down list with all the tags it could be, and say I type "<" it will further refine to "div", etc. This is the functionality I am used to in Vim, without any configuring, just by default.
When I use the command "Ctrl+N" or "Ctrl+P" I get a very small (12 tags) list of possible tags, but that is manual, and not automatically detecting the typed "<".
Am I looking at the wrong thing? Is Omni Completion not the right option I should be looking at configuring? Or was this a different plugin to provide this functionality?
Whenever I look into it, it always refers to "Ctrl+X + Ctrl+O" as the syntax auto completion, so I assumed this is the feature I have come to know. but maybe I am wrong.
So can someone help to explain this better to me, point me in the right direction. Or let me know I am on the right path (if I am) and help me fix this issue?
Thank you guys.
Take care.
As requested here is the information:
The vimrc file is here: http://pastebin.com/QfUDVvdP
My version is 7.3 (aka vim73)
I am using the CLI version, as I find GVIM actually more confusing. but I have both. and they use the same vim runtime.
I have not added any more plugins or extra feautres, as this is a fresh install on Ubuntu 12.04, which is also a fresh install. The only thing that has been altered or added is "smali.vim" syntax highlighting to syntax folder, as well as opa.vim, and opajs.vim. also opacomplete.vim to autoload.
there is vimrc, and vimrc.tiny, as well as gvimrc in /etc/vim/ folder.
and all the files for vim are located in the default directory, /usr/share/vim/vim73/ and /usr/share/vim/. None of the files are moved, changed, or altered besides what was already specified.
hope that helps.
First of all, Omni Completion never worked (or works) automatically. You said popup should appear when you insert '<' - this is not working in Vim by default. You have to press Ctrl X O combination. At least it is not working for me.
http://vimdoc.sourceforge.net/htmldoc/version7.html#new-omni-completion
I guess you have a plugin for that or something. It's not hard to implement it. Start Vim without loading any plugins to check it out. Anyway, to the question.
Many folks do not know, that Vim 7+ has decent support for XML/XHTML/HTML languages (no plugins needed!) with possibilities to extend it with any XML-based language you want. What you can do is to use DTD/RNG converters that prepares Vim definition which is used to give you omni completion.
For example, my Vim installation contains support for HTML4 and XHTML languages by default:
$ rpm -ql vim vim-common | grep xml
/usr/share/vim/vim73/autoload/xml
/usr/share/vim/vim73/autoload/xml/html32.vim
/usr/share/vim/vim73/autoload/xml/html401f.vim
/usr/share/vim/vim73/autoload/xml/html401s.vim
/usr/share/vim/vim73/autoload/xml/html401t.vim
/usr/share/vim/vim73/autoload/xml/html40f.vim
/usr/share/vim/vim73/autoload/xml/html40s.vim
/usr/share/vim/vim73/autoload/xml/html40t.vim
/usr/share/vim/vim73/autoload/xml/xhtml10f.vim
/usr/share/vim/vim73/autoload/xml/xhtml10s.vim
/usr/share/vim/vim73/autoload/xml/xhtml10t.vim
/usr/share/vim/vim73/autoload/xml/xhtml11.vim
/usr/share/vim/vim73/autoload/xml/xsd.vim
/usr/share/vim/vim73/autoload/xml/xsl.vim
/usr/share/vim/vim73/autoload/xmlcomplete.vim
/usr/share/vim/vim73/compiler/xmllint.vim
/usr/share/vim/vim73/compiler/xmlwf.vim
/usr/share/vim/vim73/ftplugin/xml.vim
/usr/share/vim/vim73/indent/xml.vim
/usr/share/vim/vim73/syntax/docbkxml.vim
/usr/share/vim/vim73/syntax/xml.vim
The trick is Vim's autoloading feature. You need to make sure the file you are opening has the proper DOCTYPE definition which is correct. So use that for HTML and XHTML files, then Vim 7+ will automatically enable XML/HTML omni completion for you. Example for HTML4:
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
</html>
Now try to insert body tag, type "bo" and hit Ctrl X O. Bang. Try to add an attribute, type "on" and hit it again. Bingo.
You can use Ctrl X O and other features:
after "<" complete the tag name, depending on context
inside of a tag complete proper attributes
when an attribute has a limited number of possible values help to complete
them
complete names of entities (defined in |xml-omni-datafile| and in the
current file with "
when used after "
More info (and possible user customization with own XML definitioins) here:
http://vimdoc.sourceforge.net/htmldoc/insert.html#ft-xml-omni
Omnicompletion is the right feature and <C-x><C-o> is the right shortcut. You should stop calling it autocompletion, by the way, because it's far from being automatic.
You don't need anything in ~/.vim/autoload because htmlcomplete.vim is already in $VIMRUNTIME.
In brief, given what I know of your settings, completion should work.
But it isn't. Please append the content of your ~/.vimrc, a list of installed plugins (and how/where they are installed) and details on your Vim version, platform and if you use the GUI or the CLI version.
edit
Omnicompletion is the right feature but you are looking for a specific plugin that uses omnicompletion under the hood on each couple of keystroke as there's no built-in setting to enable Auto completion. AutoComplPop is one such plugin (and the one I use), there are others. Pick the one that most closely matches with your previous experience.
You shouldn't touch anything in /usr/share/vim/ or /etc/vim/. All your settings should go into ~/.vimrc and your plugins should go into ~/.vim/.
~
.vim/
autoload/
opacomplete.vim
syntax/
opa.vim
opajs.vim
smali.vim
.vimrc
You must revert the default files and directories to their original state before going further.
endedit
I've asked a related question here: Show unmatched html tags in Notepad++
Having only begun to use vim, I love it. I love the fact that I can launch a file in vim and exclusively use the keyboard for editing it. And, it's so quick and easy to do it once you get the hang of it...
Aside from all that, I'm wondering if there's a way to highlight unmatched html tags in vim. I've searched SOF and also looked around the web, but I'm either not searching hard enough or nobody's posted how to do this or the ability to search for unmatched html tags in vim doesn't exist.
I'd like to focus on html tags in particular, but I'd also like to say that I'm looking for a way to show ANY unmatched tags in a document (tags being in the form of "<SOME_TAG_NAME></SOME_TAG_NAME>").
Even if I could be pointed to a good tutorial on creating plugins for vim that would be helpful. I would have made a plugin for notepad++ myself, but it requires the use of Visual Studio which I don't have. I use open source technologies (particularly Java) for my development. I'm assuming and hoping that vim doesn't require Visual Studio to write a plugin...
Try syntastic. When you run :SyntasticCheck or when you write, it will run a syntax check on the html and flag the unmatched tags.
Note: You will need htmltidy.
Also note, on gvim win32, you may need to edit syntastic's syntax_checkers\html.vim as mentioned here.
I'm currently using CodeMirror as a browser based code editor, but what really annoys me is its lack of real tabbing. It uses spaces instead of tabs, and I just cant get my code as clean as desktop editor.
Are there any better editors out there? It can be DOM based or Javascript or even browser specific, just as long as it gives me real tabs! :)
PS. I've had a look at Ace, which looks like it should do the job, but I cant seem to get real tabs to work - anyone tried it?
Cheers,
Chris.
Specifically in Firefox. We look at code in the browser often, and I am wondering if we could configure the browser so that tab characters show up as 4 spaces wide, instead of the default 8 spaces.
Edit: no responses yet. So I assume this is not possible?
Not really the answer you are looking for but maybe you could replace the tab characters with the appropriate amount of spaces and use the "pre" tag?
It is definitely worth looking at the html source to see how sites like stackoverflow.com deal with displaying source code.
I've been using Vim for a while now and love it, but one thing I've noticed when I use other editors is that I've never really got autocomplete working with much efficiency. I have supertab & snipmate working, I have tags for whatever language I'm using set up, but somehow it seems a little too cumbersome to use all that much, and apart from long method names I typically just avoid autocomplete.
Does anyone have fast, comprehensive autocomplete funcitonality set up in vim? Specifically:
At the moment, I hit "tab" to autocomplete class/method/variable names & generate snippets, but Ctrl+X+O for inbuilt langauge commands. I'd rather press tab for everything.
The ordering doesn't seem to be too intelligent. Very common stuff is often hidden in the middle of a bunch of rarely-used commands.
I've set up autocomplpop to show potential autocompletes as I'm typing, but I have to hit tab twice to accept the first entry. One much rather single-tab it.
So, any tips on setting up an efficient, comprehensive autocomplete configuration in vim? I know this question is a little vague - but if anyone has an overview of how they autocomplete well, and/or a link to a guide, it would be much appreciated.
Just thought I'd come back and mention that I finally found something I like: A customised version of NeoComplCache. Nice auto popup, everything integrated pleasantly into 'tab', and with a bit of customisation plays nice with snippets.
http://www.vim.org/scripts/script.php?script_id=2620
This is very dependant on your working domain. Vim is a text editor with the ability to interface with intelligent text-aware mechanisms.
If you are using java there is eclim, which is the eclipse backend together with a vim plugin for the frontend.
For C or C++ there is the plugin OmniCppComplete
It works by scanning the headers in the paths you have set up in vim (see :h path), and works very well imo.
If you have to press Ctrl-X_Ctrl-O for omnicompleteion, then your supertab config seems a bit broken. It should try omni or filename completion first, and then fall back to word completion.
YouCompleteMe plugin by Valloric is a very decent plugins for autocomplete and suggestion.
It contains support for all the major languages and you can extend the feature with setting up different engine .
it also comes with syntax checker so u don't have to use Syntastic separately
For setup details visit this link
https://github.com/Valloric/YouCompleteMe