I have an automatic replacement done by my vim setup, which systematically replaces all occurences of "sql" in command line by "SQL".
So when I type:
:e myfile.sql
it is translated in
:e myfile.SQL
and when I search
/sql
it is tranlasted in
/SQL
There's probably some parameters in the .vimrc, or some file sourced by .vimrc that generates this behaviour (I do not have control of everything that the .vimrc does since there's some amount of corporate .vimrc involved here), but I find myself unable to localize the part of setup that does this, or to desactivate it retroactively.
Can somebody who knows vim well help?
I have vim 7.1, running on Linux
Thanks
Probably an abbreviation set as follows:
abbrev sql SQL
The Vim documentation tells you how to determine the last location where an abbreviation was defined:
:abbreviate-verbose
When 'verbose' is non-zero, listing an abbreviation will also display where it
was last defined. Example:
:verbose abbreviate
! teh the
Last set from /home/abcd/vim/abbr.vim
So typing :verbose abbreviate should help you locate the SQL abbreviation.
cmap sql SQL
maybe?
Related
I have a very weird problem which did not exist in my environment before but now happened. When editing files, I'm used to doing this way:
gvim . #open current directory browsing
scroll up/down to select file, enter then edit.
ctrl-6 #back to previous directory
However one day I found the step3 was failed, it said "No alternate file".
My .vimrc file only contains:
colorscheme darkblue
set number
set autoindent
set nowrap
set ignorecase
set cursorline
I tried to clean all content in .cshrc but the same.
Can anyone tell me what's wrong with my gvim ?
Thanks in advance.
This looks to be a change in behavior introduced in Vim 7.4. The netrw view is no longer stored as an alternate file. See this discussion.
The Vim maintainers seemed split on what the correct behavior should be, but Bram himself offered up this advice with a mapping:
I do realize that editing the directory of the current file is
something I often do, but I never bothered to set up a mapping for
it. Typing ":e %:h" is not too difficult, but CTRL-O to jump back to
the netrw %directory view was easier.
I now added a mapping:
map ,d :e %:h<CR>
Let's see if I can get used to that.
Another related discussion can be found here.
You are likely using netrw to edit a directory. This is the equivalent of :Explore. Sadly netrw has a bad habit of not maintaining the alternative buffer, #. You maybe able to upgrade netrw or use :Rexplore (:Rex for short) to resume exploring.
Another option is to just use :e with wildcards and tab completion to explore files. Use <c-d> to list out completions as well.
I have a Ubuntu 12.04 OS. I installed vi and vim, but the backspace doesn't work properly. It is doing the same thing that delete key do.
I am expecting the backspace key to delete a character backwards, but it deletes forwards. I did some search on the Internet, there are too much suggestions for changing the .vimrc file, but non of them worked for me.
Is there anybody who has the same issue?
As explained in answer SO/a/10197995/1699311, you have to correct your terminal setting.
However, if you really want to stick with incorrect terminal behaviour (which will affect some other programs) you can instruct Vim to accommodate with that with :fixdel (it internally swap Backspace and Delete keys.)
All the previous suppose you don't have some mapping on that key.
Try adding the following to your .vimrc file, which would correct the behavior of the backspace key:
set backspace=2
Also, you can execute it inside vi/vim command mode:
:set backspace=2
Additionally, here is more information and solutions if this doesn't work for you: http://vim.wikia.com/wiki/Backspace_and_delete_problems
If your backspaces deletes forward you can use the command in vimrc file as shown below
set backspace=2
now on the vi command mode do the follwoing to re-excecute the .vimrc file
:so %
To know which .vimrc file is being read do the following
:echo $MYVIMRC
In Zsh, I can use filename completion with slashes to target a file deep in my source tree. For instance if I type:
vim s/w/t/u/f >TAB<
zsh replaces the pattern with:
vim src/wp-contents/themes/us/functions.php
What I'd like is to be able to target files the same way at the Vim command line, so that typing
:vi s/w/t/u/f >TAB<
will autocomplete to:
:vi src/wp-contents/themes/us/functions.php
I'm trying to parse the Vim docs for wildmode, but I don't see what settings would give me this. It's doing autocompletion for individual filenames, but not file paths. Does Vim support this natively? Or how can I customize the autocomplete algorithm for files?
Thanks for any advice!
-mykle-
I couldn't find a plugin to do this, so I wrote one. It's called vim-zsh-path-completion. It does what you're looking for, although via <C-s> rather than <Tab>. You can use it with <Tab> for even more control over what matches, though.
It's got bugs, but for basic paths without spaces/special characters, it should work. I think it's useful enough in its current state to be helpful. I hope to iron out the bugs and clean up the code, but I figured I'd start soliciting feedback now.
Thanks for the idea!
Original (wrong) answer, but with some useful information about Vim's wildmode.
Put the following in your .vimrc:
set wildmenu
set wildmode=list:longest
That will complete to the longest unique match on <Tab>, including appending a / and descending into directories where appropriate. If there are multiple matches, it will show a list of matches for what you've entered so far. Then you can type more characters and <Tab> again to complete.
I prefer the following setting, which completes to the first unique match on <Tab>, and then pops up a menu if you hit <Tab> again, which you can navigate with the arrow keys and hit enter to select from:
set wildmode=list:longest,list:full
Check out :help wildmenu and :help wildmode. You might also want to set wildignore to a list of patterns to ignore when completing. I have mine as:
set wildignore=.git,*.swp,*/tmp/*
Vim doesn't have such a feature by default. The closest buil-in feature is the wildmenu/wildmode combo but it's still very different.
A quick look at the script section of vim.org didn't return anything but I didn't look too far: you should dig further. Maybe it's there, somewhere.
Did you try Command-T, LustyExplorer, FuzzyFinder, CtrlP or one of the many similar plugins?
I use CtrlP and fuzzy matching can be done on filepath or filename. When done on filepath, I can use the keysequence below to open src/wp-contents/themes/us/functions.php (assuming functions.php is the only file under us that starts with a f):
,f " my custom mapping for the :CtrlP command
swtuf<CR>
edit
In thinking about a possible solution I'm afraid I was a little myopic. I was focused on your exact requirements but Vim has cool tricks when it comes to opening files!
The :e[dit] command accepts two types of wildcards: * is like the * you would use in your shell and ** means "any subdirectory".
So it's entirely possible to do:
:e s*/w*/t*/u*/f*<Tab>
or something like:
:e **/us/f<Tab>
or even:
:e **/fun<Tab>
Combined with the wildmode settings in Jim's answer, I think you have got a pretty powerful file navigation tool, here.
I am using Linux Mint 13 Maya Cinnamon 64-bit. My Vim version is 7.3 and I installed the latest version of Janus.
I found that for any files with a hash "#" in its content, the syntax highlight for the file does not work. For example,
# test
print "Hello"
The 'print' has color while I am editing the file. But when I save it and open it again the whole file loses syntax highlight.
If I deleted the first line and save, the syntax highlight comes back after I open it again.
This applies to all kinds of files such as .py, .c and .h. If there is a hash "#" character in the file, syntax highlighting does not work.
I have already tried "syntax on" but nothing changes.
I don't know Janus so this answer might not be 100% useful for you, but let's see. You could try finding out where the settings have been set. Try this:
Get current settings:
:set filetype? syntax?
Check where these have been set:
:verbose set filetype? syntax?
Execute these commands when you lost your syntax highlighting:
:syntax on
:set ft=python
:verbose set ft? syn?
Here you should see which script changed your filetype after saving. Normally, vim uses heuristics to determine the correct filetype if the file extension is ambiguous. In cases where these heuristics don't work, you usually set a global variable in your vimrc to a fixed value. In your case this would be something like:
let g:filetype_py="python"
I have always been one to replace TABs in VIM with x amount of spaces (usually 4).
Four lines I almost always use in my .vimrc config file are:
set tabstop=4
set shiftwidth=4
set expandtab
syntax on
Basically, there are moments when I NEED to use a single TAB (such as Makefiles), and I don't know how else to work around that other than leaving the file, editing my .vimrc, and then reloading the file of interest.
That said, what is the quickest way (from within VIM) to revert it back to using TABS, and then reverting back to my original settings? I'm looking for the least-hassle, least-keystrokes solution.
VIM will automatically enable the TAB for a makefile, assuming you name it "makefile," as opposed to "Makefile." Not sure why VIM still doesn't detect the type with a lower-uppercase difference, but such is life. (#Sedrik)
That aside, other alternative solutions are:
Filetype Binding (#ThorstenS #tungd):
autocmd FileType make setlocal noexpandtab
RealTime Switch (#ThorstenS):
Assuming the .vimrc configuration mentioned in the question, do:
:set noet (to switch from spaces to TAB)
and :set et (to switch back)
Just use the magical escape key available in insert mode.
On the *NIX's it is ^V by default when you are in insert mode. On Windows, you need to find out what the magical escape character is - ^V is taken for something else; I think it may be ^Q or ^S?
So! In your makefile:
this: this.c
<C-V><Tab>cc this.c
where the usual meanings apply:
means hit ctrl-V (you should see a ^ hiding away under the cursor)
- hit the tab key. Bingo.
Works for me.
Note: if you use vim settings or startup code which smashes tabs as you read a file, this obviously is a short-term fix. I prefer to learn how to use the retab command to ensure a file is tab-clean, because I don't like a file to be touched unless I consciously choose to do so.
Just type set noexpandtab . Perhaps you bind this to a function key.
Only this configuration helped me solve this problem.
filetype plugin indent on
filetype detect
autocmd FileType make set noexpandtab
Vim defaults to tabstop=8 and noexpandtab, so the defaults are well suited to working with Makefiles. If your .vimrc uses custom options for tabstop, expandtab, etc., one simple solution is to bypass your .vimrc while working with Makefiles.
From the manpage (emphasis mine):
-u {vimrc} Use the commands in the file {vimrc} for initializations. All the other initializations are skipped. Use this to edit a special kind of files. It can also be used to skip all initializations by giving the name "NONE". See ":help initialization" within vim for more details.
Since I can never remember the necessary flag/value/formatting, I've created a Bash alias which remembers for me: alias vimnone='vim -u NONE'
You can create a custom configuration per file type.
mkdir -p ~/.vim/after/indent
echo 'set noexpandtab' >> ~/.vim/after/indent/make.vim
Basically, here we created a new indent configuration for makefiles that will be loaded after other scripts.
source