I have a client who is asking me to fix an issue they are having with Microsoft Project.
The issue is that they are attempting to open a task list on SharePoint Online via the 'Open with Project' button in the ribbon, but after the alert asking them if they would like to open it in Project 2016 pops up nothing happens.
I have set up a fresh SharePoint environment and tried it at my end, but I get the same problem. There is no error message (as an alert or in the console) and I have wracked my brain and come up dry.
What I have tried:
New SharePoint instance.
Fresh Microsoft Project install.
Looked at the site/site collection features
Multiple browsers (specifically Chrome, IE and Firefox)
The issue is the same no matter what I do.
Has anyone else come across this problem before and, if so, how did you solve it?
Are you using 2016 Click-to-run (C2R) or MSI version? Can you share the build number from winproj.exe?
If you are on C2R version, can you try making the following registry edits (save the following as a .reg file and run it) and see if it helps?
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\SOFTWARE\Wow6432Node\Microsoft\Office\16.0\Common\ExperimentEcs\Overrides]
"ofhdegpklv1irq0"=dword:00000000
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\16.0\Common\ExperimentEcs\Overrides]
"ofhdegpklv1irq0"=dword:00000000
I have created a vsto addin in VS2012. I have added an installation project to the solution using Installsheild LE. After installing the exe that I get, I get the expected item added to my add/remove programs. However when I open Word, I get prompted with a Microsoft Office Customization Installer prompt which says the publisher is unknown. I click OK to this and it adds my addin as expected, which all works fine but I also get a second item appear in my add/remove programs.
Can anyone tell me why I am getting the second item in add/remove programs and offer any advice about what I should do to avoid this?
You have to add "|vstolocal" to the addin registry value that points to your addin file. This tells ClickOnce to run it directly and not install it per-user.
You also want to digitally sign the addin using a certificate issued by someone in the users trusted root. This could be VeriSign or others. If you create your own certificate you have to use custom actions to install the root certificate in the certificate store and to register the publisher cert as a trusted publisher.
I've created about a dozen of these installers over the last 8 years and it's tricky at first but gets easier over time. Several of my customers are using InstallShield LE to get the prereqs installed but then I factor all the components out into a WiX merge module where I can use things like the Util extension to install certificates.
It looks like you use ClickOnce and MSI installers to deploy the add-in. You need to remove any of them. Both kind of installers are described in the following articles in MSDN:
Deploying an Office Solution by Using ClickOnce
Deploying an Office Solution by Using Windows Installer
Is that your dev machine and got Visual Studio in it? I have seen this happened with Windows 7 during development the addin is added in to add/remove programs. This has gone later when I updated my Windows 7 machine. Some updates from Microsoft has removed this later.
I have been sent a working project from a coworker to start learning Visual Studio. The project is under version control, however I don't want to have access to final customer product. So when I try to open the solution file I first get a message that the project is under source control:
"Team Foundation Server Version Control
The solution you are opening is bound to source control on the following Team foundation Serer:
http:// . Would you like to contact this server to try to enable source control integration?"
[yes] [no] [help]
I press no, then I get an error:
"The solution appears to be under source control, but its binding information cannot be found. Because it is not possible to recover the missing information automatically, the projects whose bindings are missing will be treated as not under source control."
[ok] [help]
I proceed and press ok, and another message pops up:
"projectname\projectname.tsproj: The application which this project type is based on was not found. Please try this link for further information: http://go.microsoft.com/fwlink/?prd=12395&pver=11&sbp=ProjectTypeDeprecated&plcid=0x409&clcid=0x409&ar=MSDN&sar=ProjectCompatibility&o1=B1E792BE-AA5F-4E3C-8C82-674BF9C0715B"
My coworker tells me he sent the whole project, so I can't figure out why I cant get visual studio to open it. I am new to visual studio, but I have some programming experience.
Any help is much appreciated.
Thank you
It is doubtful that version control has something to do with your problem. There are two possibilities I could think of:
Your coworker uses full version of VS2012 and you are now having problems due to the fact that Visual Studio Express comes in two main flavours - Web and Desktop. It is unable to load Web(or Desktop) project because it just does not have any tools to work with it. Ask your coworker whether they mix web and desktop in their solutions. If it is so you should either use full VS or be given a reduced set of projects.
Nearly the same - your coworker uses some very old or very new version of particular project type (something like ASP.NET MVC that(as I remember) has different project type for each version). Again ask your coworker if it is so. In this case you will just have to install the needed templates and SDKs.
P.S. I was unable to open your link - it opens microsoft.com/default(maybe due to some regional problems). Search by key words brought to me similar problem for VS2010 http://connect.microsoft.com/VisualStudio/feedback/details/728847/could-not-open-vs2010-solution-with-mvc-project - may be it could help you more specifically.
When I am trying do deploy/debug etc. my hosted app :
I am writing good credenials, and then something strange happen what happen only on one machine (sad to say it's only mine).
After putting sign in button (keep me signed checked/uncheced 100 times) it's would not login, but open sharepoint 2013 site in this window:
What I did:
reinstall visual studio
update visual studio
restart computers
clear cookies/catche etc.
Solved accidentally by installing CKSdev tools but only for one run...
It once happened to me that while it was a debug version all credentials were always rejected. I still don't really know why (it was a big project, not fully made by myself), but as a temporary solution you may try hardcoding your credentials. It's not perfect, but it may be working ;)
The one and only solution was reinstaling the windows, i didn find any other solution
edit:
After the newest updates this problem is solved
I downloaded Visual Studio 2012 yesterday when it was released on MSDN. I have noticed that a few of the project types that we had in 2010 are gone or different. The biggest difference for me right now is the removal of the Windows Installer project. Now we are being forced to use the InstallShield LE (Limited Edition). The problem here is that I write a ton of Windows Services and I can't see how to setup InstallShield LE. It appears that we (my company) will have to invest in licenses for the professional edition.
Has anyone found a way to install services in InstallShield LE? When using the Windows Installer project, you just set the custom actions.
For Visual Studio 2012 & InstallShield LE, do the following:
Run through the InstallShield project assistant and add the primary output of your service to the Application files section.
After you are done with the project assistant, double click the "Files" item under step two of the setup project.
Right click on the primary output of your service, and go to properties.
Click the "COM and .NET Settings" tab, and place a check in the "Installer Class" checkbox.
Click Ok
Now, once you build and run your install, your service will show up in the Windows Services snap in.
Note that this assumes you added a "Project Installer" to your service project (Right click on the service design sheet and click "add installer"). I can confirm this work on Windows 8 with Visual Studio 2012 / InstallShield LE.
I've recently installed VS 2012 with Install Shield LE. At first I kept getting a ISEXP -5036 internal server error after a build (this was after setting up a ISLE project and running through the Install Shield Project Assistant). Eventually I found out that it was trying to create the MSI in the DVD-5 media type which is where it was failing. For some reason, creating the solution again from scratch somehow recognizes to only build to the CD_ROM and SingleImage media types which works.
Anyway to rectify the 5036 error, click the Build tab in VS 2012 (top menu), select configuration manager and you should see that your IS setup file is selected on the DVD-5 configuration. Change this to CD_ROM and click close. Once you build/rebuild it will complete with no IS 5036 error.
While using the installer class checkbox may work for some instances, you may experience the following error:
Error 1001.The specified service already exists
Here is an excerpt from this link on how to resolve this issue:
For Error: Error 1001.The specified service already exists
This error will occur if the component installing a .NET Service is
incorrectly configured with ".NET Installer Class" set to Yes. The
method to install a .NET Service is to use Component\Advanced
Settings\Services view, not the ".NET Installer Class" setting.
Making definitions in the Component\Advanced Settings\Services view
creates entries in the Windows Installer ServiceControl and
ServiceInstall Tables. These entries are used by the Windows
Installer "InstallServices" action to install the Service.
If your project is .NET, then try then you can use the ServiceProcessInstaller class with InstallShield LE.
To get it to work with InstallShield, you have to go into the InstallShield "files" tree and right click on your file. Then check the checkbox for "Installer class" on the "COM and .NET settings" tab.
I have gotten it to work, but I've had problems on some OS's like Windows 2008R2. Your mileage may vary.
Here is an example: http://www.codeproject.com/Articles/14353/Creating-a-Basic-Windows-Service-in-C
I had all sorts of problems with this.
As follows.
InstallShield takes ages to download
the registration process is a pain.
the configuration options are confusing and overly complex.
the accepted solution on this thread is a hack and it doesn't always work - see 1001 in the documentation - essentially you need to get through the paywall to get the right configuration options to install a windows service.
Solution for me as mentioned elsewhere - was to abandon InstallShield
Very easy from that point.
Edit: Update - install the latest version from here https://wix.codeplex.com/releases/view/115492 for vs 2013 / 2015
Visual Studio setup projects are back in VS 2013 as a visual studio extension.
https://visualstudiogallery.msdn.microsoft.com/9abe329c-9bba-44a1-be59-0fbf6151054d
Please update your solution and projects to VS 2013. If you are still in VS 2010, you are probably better off by upgrading directly to VS 2013.
My experience with Installsheild LE is that it is very quirky but once you figure out the tricks, it is easier to use. However, I think that the limited edition is a way by Microsoft and Flexera to sell the fully featured edition. In other words, first we pay Microsoft a lot of money for Visual Studio and then their partner (in crime) more for Installsheild. Bad strategy which did not work out since they had to bring back the setup projects in VS 2013.
I've written about this subject:
Augmenting InstallShield using Windows Installer XML - Windows Services
Basically you create a merge module using WiX to encapsulate the service and then add it to your installshield project. ( Be sure to associate to the INSTALLDIR directory to make sure your file goes where you expect ). Build and test on a VM. Piece of cake.
I'm using VS2012 and Installshield LE Spring Edition. I did not have to use Wix.
If you encounter the error "Could not create _isconfig.xml for use with InstallUtilLib.dll", please create a folder with the same name as your setup project and inside the setup project folder.
Credits to http://community.flexerasoftware.com/showthread.php?165929-Could-not-create-_isconfig-xml-for-use-with-InstallUtilLib-dll
I just got some problems finding where to add installer as referred in the answer. So here it is how.
Double click on your service class within your Windows service Project
A blank screen with the text "To add components to your class, drag them from the Toolbox and use the Properties window to set their properties..."
Right click anywhere but on the links and select "Add Installer"
see ya
Bear in mind that all the above explanation will not help you if you plan to create later an upgrade of that setup. InstallShiled LE can't stop the running service when you upgrade. You can't do it either from Window Service Installer -> BeforeInstall event.
Wanted to put this here;
On VS 2015, when doing this, I ran into the 1001 error upon installation repeatedly.
Answer on this page explained that on the newer versions (anything past 2012), apparently you need to explicitly leave the installer class option unchecked, and then add your windows service under the Services section under Step 3 of the installer project:
Error 1001 when installing custom Windows Service