I downloaded the source code from "ftp://ftp.andrew.cmu.edu/pub/cyrus-mail/".
Configure went well but when i build I end up with following errors:
digestmd5.c:852: error: 'des_context_t' has no member named 'keysched'
digestmd5.c:853: error: 'des_context_t' has no member named 'keysched2'
digestmd5.c:854: error: 'des_context_t' has no member named 'ivec'
digestmd5.c:855: error: 'DES_DECRYPT' undeclared (first use in this function)
....
Well i guess configuration issues.
I configured it with following settings and it worked.
./configure --prefix= (PATH) --exec-prefix=(PATH) --with-dblib=no --without-des --with-openssl=(PATH)
Related
I am not new to puppet, but I am new to using it on Windows. Trying to configure chocolatey using the puppetlabs/chocolatey module. Initial puppet run without the module worked just fine. Then I added include chocolatey to the manifest, and it downloaded and installed chocolatey. So far, so good. However, then I went to add a custom source like so:
chocolateysource { 'mysource':
ensure => present,
location => 'https://my.chocolatey.source',
priority => 10,
}
Now I get the following message when running puppet agent -t:
PS C:\Windows\system32> puppet agent -t
Error: Could not autoload puppet/provider/package/chocolatey: C:/ProgramData/PuppetLabs/puppet/cache/lib/puppet/provider/package/chocolatey.rb:280: syntax error, unexpected '.'
pin_output&.split("\n")&.each { |pin| pin...
^
C:/ProgramData/PuppetLabs/puppet/cache/lib/puppet/provider/package/chocolatey.rb:280: syntax error, unexpected '.'
... pin_output&.split("\n")&.each { |pin| pins << pin.spli...
... ^
Error: Facter: error while resolving custom facts in C:/ProgramData\PuppetLabs\puppet\cache\lib\facter\package_provider.rb: Could not autoload puppet/provider/package/chocolatey: C:/ProgramData/PuppetLabs/puppet/cache/lib/puppet/provider/package/chocolatey.rb:280: syntax error, unexpected '.'
pin_output&.split("\n")&.each { |pin| pin...
^
C:/ProgramData/PuppetLabs/puppet/cache/lib/puppet/provider/package/chocolatey.rb:280: syntax error, unexpected '.'
... pin_output&.split("\n")&.each { |pin| pins << pin.spli...
... ^
Info: Using configured environment 'production'
Info: Retrieving pluginfacts
Info: Retrieving plugin
Info: Loading facts
Info: Redefining package in Puppet::Type
Error: Could not autoload puppet/type/chocolateysource: C:/ProgramData/PuppetLabs/puppet/cache/lib/puppet/type/chocolateysource.rb:221: syntax error, unexpected '.'
parameter(:password)&.sensitive = true
^
Error: Could not retrieve catalog from remote server: Could not intern from text/pson: Could not autoload puppet/type/chocolateysource: C:/ProgramData/PuppetLabs/puppet/cache/lib/puppet/type/chocolateysource.rb:221: syntax error, unexpected '.'
parameter(:password)&.sensitive = true
^
Warning: Not using cache on failed catalog
Error: Could not retrieve catalog; skipping run
As a non-Windows user, I feel like I'm missing something to make this work, but I'm not sure what it is. I have verified that .Net framework is installed, but not sure what else to check here. Thanks in advance for any help.
Turns out the version was the issue. I had mistakenly installed puppet 4 agent, while the server is puppet 7.
On a virtual host server, I have 1 repository that I can no longer checkout from a remote computer. Checkout works fine if I'm checking out on the server itself. All other repositories on the same virtual host server work without a problem, though none of them have as many files as this one.
When I check out on a remote computer, checkout goes a certain number of files, then starts displaying checksum errors, usually between 2 and 6 at a time. If I delete the checked out folder and try again with a new folder, it will stop after about the same number of files, and the collection of files with checksum errors is different from the previous checkout. Checking out on a different remote computer gets the same random results.
First try:
Error: Checksum mismatch for
Error: 'C:\Users\jkorc\Documents\Projects\VHost\RoyalProvincial\Genealogy\Settle\settle.shtml':
Error:
Error: expected: b450dbef2a3ceb9542a4e22b4b3e50fe
Error: actual: 9454a4eb5afdbc215bffcc619f537fa3
Error: Additional errors:
Error: Checksum mismatch for
Error: 'C:\Users\jkorc\Documents\Projects\VHost\RoyalProvincial\Genealogy\Settle\lndnjv1.shtml':
Error:
Error: expected: e187d974743d0129a6c72413f205458c
Error: actual: 73c0b6aba9a9a42409e2cf7e6d043049
Error: Additional errors:
Error: Checksum mismatch for
Error: 'C:\Users\jkorc\Documents\Projects\VHost\RoyalProvincial\Genealogy\Settle\lndfraser.shtml':
Error:
Error: expected: 151444dc294357ba42a640333c94b6f7
Error: actual: 900ffa360acd460773acbe1759578533
Error: Additional errors:
Error: Checksum mismatch for
Error: 'C:\Users\jkorc\Documents\Projects\VHost\RoyalProvincial\Genealogy\Settle\lndretn1.shtml':
Error:
Error: expected: 6b8791dc78b0af936d6d7e70e11b69ee
Error: actual: dd7af732663345c6401861c89331adea
Error: Additional errors:
Error: Checksum mismatch for
Error: 'C:\Users\jkorc\Documents\Projects\VHost\RoyalProvincial\Genealogy\Settle\lndrfa2.shtml':
Error:
Error: expected: 7451fedd09e1f99adf4c4af2668c4942
Error: actual: 548f947ce54c697957daa4efa4192786
Error: Additional errors:
Error: Checksum mismatch for
Error: 'C:\Users\jkorc\Documents\Projects\VHost\RoyalProvincial\Genealogy\Settle\lndpwar3.shtml':
Error:
Error: expected: f7fba4f2a3a468df6c4948eaa034e119
Error: actual: 0f3c2da13e55a7c0271743e7d145cfca
Error: Additional errors:
Error: Checksum mismatch for
Error: 'C:\Users\jkorc\Documents\Projects\VHost\RoyalProvincial\Genealogy\Settle\lndrhe1.shtml':
Error:
Error: expected: 32cc673b06be5806bc6bc66000d5ec75
Error: actual: 5356175235c395577793e9fa9f0b9bb7
Second try:
Error: Checksum mismatch for
Error: 'C:\Users\jkorc\Documents\Projects\VHost\RoyalProvincial\Genealogy\Settle\Petition_Teder_M_1795.shtml':
Error:
Error: expected: c29978209a203cd254c641bd931739e5
Error: actual: e4042c36b5ff42a01eb890044d64b131
Error: Additional errors:
Error: Checksum mismatch for
Error: 'C:\Users\jkorc\Documents\Projects\VHost\RoyalProvincial\Genealogy\Settle\lndbrng1.shtml':
Error:
Error: expected: 6daeec06c6290557ca6b0de0d551fc43
Error: actual: 598d6bad86117e4cf8f384ed523800aa
I created a new repository of the same files on the same server. Same problem, except I start getting checksum errors after downloading only about a dozen files instead of a few hundred. The server is on Subversion 1.13.0, Tortoise is 1.13.1.
Any ideas what kind of problem I should be looking for?
My assumption would be that a certain folder has a corrupt checksum (for whatever reason).
Fist of all I'd check integrity of the SVN. Some instyructions can be found here:
https://www.darklaunch.com/fix-svnadmin-checksum-mismatch-while-reading-representation.html
There's quite some people experiencing this issue. The easy work around normally mentioned is to recreate the repo:
Copy the content to a temporary directory
Add the folder as new one to SVN
As the new content will get new checksums, those should be ok for all folders afterwards
If you want to do some direct editing, here's a post that corrected the SVN files successfully (use at own risk, make backups!)
https://maymay.net/blog/2008/06/17/fix-subversion-checksum-mismatch-error-by-editing-svnentries-file/
I once had strange behaviour when content on net packages had been capped as well. That was caused by the MTU (Maximum Transfer Unit). SVN seem to struggle here as well, so adjust the setting in your network infrastructure. Here's a link to a similar issue with SVN involved.
https://serverfault.com/questions/392881/tortoise-svn-repo-browser-checkout-over-vpn
As summary: To isolate the issue I would do the following steps:
A) See if the repo's SVN metadata is cause:
log to server
copy the repo as filesystem (without SVN data)
create a new repo with the files
connect svn client from other host. If all goes well the SVN metadata is corrupt
b) Check if it's host/network specific
Do the same as A but from other host (= create the repo from there)
List item
c) Check if network MTU is ok
do check up to which size packets will be transferred ok (will not go into details as this is very OS/infrastructure related, but you'll find lot's of infos)
note hops/VPNs/multiple routers/IPv4-IPv6 can all play into this
Having written all that: Did you crosscheck behaviour with a second SVN client in the first place? Might be the first thing to do.
I am running openwrt on beagle bone black board. I am getting following error while running freeradius.
radiusd -X
rlm_eap: SSL error error:02001002:lib(2):func(1):reason(2)
rlm_eap_tls: Error reading certificate file /etc/freeradius2/certs/server.pem
rlm_eap: Failed to initialize type tls
/etc/freeradius2/eap.conf[17]: Instantiation failed for module "eap"
/etc/freeradius2/sites/default[312]: Failed to find "eap" in the "modules" section.
/etc/freeradius2/sites/default[254]: Errors parsing authenticate section.
when i checked there is no "cert" directory present in /etc/freeradius2/. Plz help
Problem was solved after installing freeradius2-democerts_2.2.7-1_omap.ipk
after installing following error might trouble:
Debug: Module: Checking authorize {...} for more modules to load
Error: /etc/freeradius2/sites/default[160]: Failed to find "reject" in the "modules" section.
Error: /etc/freeradius2/sites/default[69]: Errors parsing authorize section.
to resolve this go to /etc/freeradius2/sites/default line no. 160. comment the line which has reject word.
I'm trying to install OpenCV-2.4.9 on CentOS 7 (PC) however getting error after 16% when running "make" command. I leave default configuration for OpenCV.
make
...
[ 16%] Building CXX object modules/highgui/CMakeFiles/opencv_highgui.dir/src/cap_v4l.cpp.o /opt/opencv-2.4.9/opencv/modules/highgui/src/cap_v4l.cpp:306:29: error: field ‘capability’ has incomplete type
struct video_capability capability;
^ /opt/opencv-2.4.9/opencv/modules/highgui/src/cap_v4l.cpp:307:29: error: field ‘captureWindow’ has incomplete type
struct video_window captureWindow;
....
....
/opt/opencv-2.4.9/opencv/modules/highgui/src/cap_v4l.cpp: In function ‘void icvCloseCAM_V4L(CvCaptureCAM_V4L*)’:
/opt/opencv-2.4.9/opencv/modules/highgui/src/cap_v4l.cpp:2812:46: error: ‘CvCaptureCAM_V4L’ has no member named ‘memoryBuffer’
It seems that the define HAVE_CAMV4L has the value 1, if you look in the file modules/highgui/src/cap_v4l.cpp looking for the structure definition at the row 306. If the compilation fails at that point this means that the video4linux development configuration is corrupted.
Using google I have found that the OpenCV Bug #1357 is described as follow:
CHECK_INCLUDE_FILE(linux/videodev.h HAVE_CAMV4L) succeeds even though linux/videodev.h doesn't exist on the system. (Bug #1357)
http://code.opencv.org/issues/1357
Anyway the solution is described at the same URL for "HAVE_CAMV4L gets set incorrectly": "Setting it to FALSE in CMakeLists.txt fixes the problem".
I try to install BusyBox 1.20.2 on a embedded system with PowerPc. At first I want to try it with the default config.
So this are the commands
make defconfig
make
And this is the result:
ma-bash-3.2# make
CC miscutils/ubi_tools.o
miscutils/ubi_tools.c: In function 'ubi_tools_main':
miscutils/ubi_tools.c:137: error: 'UBI_DEV_NUM_AUTO' undeclared (first use in this function)
miscutils/ubi_tools.c:137: error: (Each undeclared identifier is reported only once
miscutils/ubi_tools.c:137: error: for each function it appears in.)
miscutils/ubi_tools.c:157: error: storage size of 'req' isn't known
miscutils/ubi_tools.c:165: error: 'UBI_IOCATT' undeclared (first use in this function)
miscutils/ubi_tools.c:157: warning: unused variable 'req'
miscutils/ubi_tools.c:171: error: 'UBI_IOCDET' undeclared (first use in this function)
make[1]: *** [miscutils/ubi_tools.o] Error 1
make: *** [miscutils] Error 2
How is it possible to solve that Error?
Can I disable this ubi_tool ? What effects will that have and how to do that?
Remove these lines in .config:
CONFIG_UBIATTACH=y
CONFIG_UBIDETACH=y
CONFIG_UBIMKVOL=y
CONFIG_UBIRMVOL=y
CONFIG_UBIRSVOL=y
CONFIG_UBIUPDATEVOL=y
you won't have support for ubifs.