I use the following piece of code to check out and then check in a file. I use IronPython.(Say spfile is the SPFile object)
spfile.CheckOut()
spfile.CheckIn("Done by the script")
spfile.Update()
spfile.CheckOut()
spfile.CheckIn("Done by the script-Second time")
The file is checked in for the first time. But the second time, it throws an exception stating that, the file has been modified at a particular time by SHAREPOINT\system. I find this obscure as I have updated the file already. Any help would be appreciated
Basically its a transcational issue. You need to get a new reference to the SPfile object in order to refresh the underlying version information and last transaction.
spfile.CheckOut()
spfile.CheckIn("Done by the script")
spfile.Update()
spfile = SPlistItem.File;
spfile.CheckOut()
spfile.CheckIn("Done by the script-Second time")
Related
When i run my code in the test environment to test my new code about kudu insert,it reports to me:
This row was already applied and cannot be modified.
I have already tried to debug my code and to see what is the problem in my code , but it is useless
if((map.get(list.get(i))) instanceof Double){
row.addDouble(list.get(i), (Double) map.get(list.get(i)));
//System.out.println("Double type insert succeed ： " + list.get(i) + " : " + map.get(list.get(i)));
continue;
}
I want to know what's wrong in my code because in my previous code i can run correct but know it cannot
In the source code ,The class was that PartialRow has a private propertiy:frozen, It's default value was false,but in my code,when i debug in it,i found that value was true,I think this is the reason that cause the program reports to my : This row was alredy applied and cannot be modified ！ asking for help .please
Without full stacktrace and the rest of code I can only guess why this is happening.
My guess is because the Insert object on which this row object is created has already inserted to Kudu (using KuduSession.apply) and then you tried to update it using row.addDouble.
If you are unsure about why please see this example of how to insert into Kudu.
KuduSession.apply method is invoked on Insert object on which PartialRow object is created, this will insert the data from all the PartialRow objects created from the Insert object. This can be done only once on one Insert object. After that you create a new Insert object using KuduTable.newInsert()
In your case you should probably create new object of Insert using KuduTable.newInsert() and create a row object on this.
I am trying to run the code available on GitHub.
Issue is when I am trying to create an envelope I am getting an exception saying "PDF_VALIDATION_FAILED".
Can anyone help me out with this issue?
Really you should be creating a new issue to log the new error you are getting, or modify your original post. In any case the issue is most likely due to the file extension, the default is pdf so if you want to send a different format document you can do the following:
// Add a document to the envelope
Document doc = new Document();
doc.DocumentBase64 = System.Convert.ToBase64String(fileBytes);
doc.Name = Path.GetFileName("/PATH/TO/DOC/TEST.DOCX");
doc.DocumentId = "1";
doc.FileExtension = "docx";
I managed to get a fix for this one. Apparently the file I was uploading was a corrupt file. However, not I am getting a different error 'UNABLE_TO_LOAD_DOCUMENT' when I try to upload a file in any format other than pdf.
Can anyone help me with this query? Also, what all file formats does DocuSign support?
Also, one of the previous libraries 'DocuSign.Integrations.Client' seem to work fine with word document uploads. Should they be used instead of 'DocuSign.eSign.Api', 'DocuSign.eSign.Client' and 'DocuSign.eSign.Model'?
This is in response to the second error you mentioned:
I think you are missing assigning the FileExtension to the required format
something like : doc.FileExtension = "docx"
Once you do that, you will get rid of UNABLE_TO_LOAD_DOCUMENT error and the document can be sent successfully.
I am getting below error when I run the Orchestration and try to assign value to a promoted property by reading the value of another promoted property.
Error in Suspended Orchestration:
Inner exception: There is no value associated with the property BankProcesses.Schemas.Internal_ID' in the message.
Detail:
I have 2 XSD schemas, 1 for calling a stored procedure and reading its response and another to write it into a flat file. The internal ID returned in the response from SP needs to be passed to a node in another XSD schema to write to a flat file format.
I have promoted an element from the response schema and also promoted an element from the schema to write to flat file. I am assigning the value to promoted propeties as below:
strInternalId = msgCallHeaderSP_Response(BankProcesses.Schemas.Internal_ID);
msgCallSP(BankProcesses.Schemas.Header_Internal_ID) = strInternalId;
But when I run the orchestration I get the error as mentioned above. I have checked the reponse from stored procedure and the reponse XML does contain some value but I am unable to assign that value to another schema. Please advice
Thanks,
Mayur
You can use exists to check the existence of property.
if(BankProcesses.Schemas.Internal_ID exists msgCallHeaderSP_Response)
{
strInternalId = msgCallHeaderSP_Response(BankProcesses.Schemas.Internal_ID);
msgCallSP(BankProcesses.Schemas.Header_Internal_ID) = strInternalId;
}
One scenario that might cause this error is that there is no Header_Internal_ID element in the message you are trying to modify. Can you inspect the message before modification to ensure that there is an element whose value should be changed - drop the message out to a file location, maybe.
If this is the case, then just ensure that you create this element when you instantiate you r message for the first time - even if you initially set it to an empty element.
HTH
To check if the property exists, you can use this syntax:
BMWFS.LS.BizTalk.CFS.BankProcesses.Schemas.Internal_ID exists msgCallHeaderSP_Response
However, if the case is that the source field would always be there, you have to work backwards to find out why the Property is not appearing on the Context.
If it's coming from a Port, is the message passign through an XmlDisassembler Component? If it's coming from another Orchestration, are you actually setting the Property?
The easiest way to look at the Context is to route the Message, msgCallHeaderSP_Response, to a Stopped Send Port. You can then view the Context in BizTalk Administrator.
I was created a program in java for getting nsf file Details. I have passed the filepath which contains the nsf file for getting database. I want to know about the getFileFormat() method and what is the value it returns.
Database db = session.getDatabase("", filePath);
System.out.println("File Format :"+db.getFileFormat());
It will get the format version of the database. Essentially the version from which the database was created. It's equivalent to this method:
http://publib.boulder.ibm.com/infocenter/domhelp/v8r0/index.jsp?topic=%2Fcom.ibm.designer.domino.api.doc%2Fr_domino_Database_FileFormat.html
I'm trying to make a portlet which shows most downloaded files from document library.
Thanks in advance.
Take a look at com.liferay.portlet.documentlibrary.service.DLFileEntryServiceUtil
Specifically
com.liferay.portlet.documentlibrary.service.DLFileEntryServiceUtil.getFileEntry(long groupId, long folderId, java.lang.String name)
You will get DLFileEntry so
DLFileEntry dlfe = com.liferay.portlet.documentlibrary.service.DLFileEntryServiceUtil.getFileEntry(my-group-id, folder-id, name);
dlfe.getReadCount();
will get you what you want.