Related
Let's say I've typed "abcdefg", with the cursor at the end. I want to delete back to the c, so that I only have "abc" left.
Is there a command like d that includes the current character? I know I could do dTcx, but the x feels like a work-around and I suppose there's a better solution.
No. Backward motions always start on the left of the current character for c, y and d which is somehow logical but also unnerving.
The only "clean" solutions I could think of either imply moving to the char after c first and then do a forward delete:
Tcde
or using visual mode:
vTcd
v3hd
But, given your sample and assuming you are entering normal mode just for that correction, the whole thing sounds extremely wasteful to me.
What about staying in insert mode and simply doing ←←←←?
try this:
TcD
this will leave abc for your example... well if the abcdefg is the last word of the line.
if it is not the last word in that line, you may do:
ldTc
or golfing, do it within 3 key-stroke:
3Xx or l4X
See this answer to a similar question : there is a setting to be allowed to go beyond the end of the line
From the doc :
Virtual editing means that the cursor can be positioned where there is
no actual character. This can be halfway into a tab or beyond the end
of the line. Useful for selecting a rectangle in Visual mode and
editing a table.
"onemore" is not the same, it will only allow moving the cursor just
after the last character of the line. This makes some commands more
consistent. Previously the cursor was always past the end of the line
if the line was empty. But it is far from Vi compatible. It may also
break some plugins or Vim scripts. For example because |l| can move
the cursor after the last character. Use with care!
Using the $ command will move to the last character in the line, not
past it. This may actually move the cursor to the left!
The g$ command will move to the end of the screen line.
It doesn't make sense to combine "all" with "onemore", but you will
not get a warning for it.
In short, you could try :set virtualedit=onemore, and see if your environment is stable or not with it.
Use d?c
That will start d mode, search back to 'c' and then delete up to your cursor position.
Edit: nope, that does not include current position...
I may be misunderstanding your request, but does 3hd$ do it?
I would use vFdd in this example. I think it's nicer than the other solutions since the command explicitly shows what to delete. It includes the current character and the specified character when deleting.
v: enter visual mode (mark text)
F: find/goto character backwards
d: the character "d" that will be included for removal.
d: delete command
Since it is visual mode, the cursor can also be moved before executing the actual removal d. This makes the command powerful even for deleting up to a non unique character by first marking a special character close to the character and then adjusting the position.
I have the following characters being repeated at the end of every line:
^[[00m
How can I remove them from each line using the Vim editor?
When I give the command :%s/^[[00m//g, it doesn't work.
You could use :%s/.\{6}$// to literally delete 6 characters off the end of each line.
The : starts ex mode which lets you execute a command. % is a range that specifies that this command should operate on the whole file. The s stands for substitute and is followed by a pattern and replace string in the format s/pattern/replacement/. Our pattern in this case is .\{6}$ which means match any character (.) exactly 6 times (\{6}) followed by the end of the line ($) and replace it with our replacement string, which is nothing. Therefore, as I said above, this matches the last 6 characters of every line and replaces them with nothing.
I would use the global command.
Try this:
:g/$/norm $xxxxxx
or even:
:g/$/norm $5Xx
I think the key to this problem is to keep it generic and not specific to the characters you are trying to delete. That way the technique you learn will be applicable to many other situations.
Assuming this is an ANSI escape sequence, the ^[ stands for a single <Esc> character. You have to enter it by pressing Ctrl + V (or Ctrl + Q) on many Windows Vim installations), followed by Esc. Notice how this is then highlighted in a slightly different color, too.
It's easy enough to replace the last six characters of every line being agnostic to what those characters are, but it leaves considerable room for error so I wouldn't recommend it. Also, if ^[ is an escape character, you're really looking for five characters.
Escape code
Using ga on the character ^[ you can determine whether it's an escape code, in which case the status bar would display
<^[> 27, Hex 1b, Octal 033
Assuming it is, you can replace everything using
:%s/\%x1b\[00m$//gc
With \%x1b coming from the hex value above. Note also that you have to escape the bracket ([) because it's a reserved character in Vim regex. $ makes sure it occurs at the end of a line, and the /gc flags will make it global and confirm each replacement (you can press a to replace all).
Not escape code
It's a simple matter of escaping then. You can use either of the two below:
:%s/\^\[\[00m$//gc
:%s/\V^[[00m\$//gc
If they are all aligning, you can do a visual-block selection and delete it then.
Otherwise, if you have a sequence unknown how to input, you can visually select it by pressing v, then mark and yank it y (per default into register "). Then you type :%s/<C-R>"//g to delete it.
Note:
<C-R>" puts the content of register " at the cursor position.
If you yanked it into another register, say "ay (yank to register a - the piglatin yank, as I call it) and forgot where you put it, you can look at the contents of your registers with :reg.
<C-R> is Vim speak for Ctrl+R
This seems to work fine when the line is more than 5 chars long:
:perldo $_ = substr $_, 0, -5
but when the line is 5 or less chars long it does nothing.
Maybe there is a easy way in perl to delete the last 5 chars of a string, but I don't really know it:)
Use this to delete:
:%s/^[[00m//gc
I am trying to use vim properly - to aid me I've mapped my arrow keys to "" so that I am forced to use {hjlk} to move around.
This is causing me a problem when I want to just surround a character with spaces, eg:
"2+3" is better formatted "2 + 3"
Previously I would have put my cursor over the + and typed:
i[space][arrow-right][space][Esc]
That's 5 presses.
To do this without the arrow I seem to need to put the cursor over the + and go:
i[space][Esc]lli[space][Esc]
That's 8 presses.
I can convert the "li" into an "a" which reduces it to 7 presses:
i[space][Esc]la[space][Esc]
Short of writing this into a macro is there a better way of doing it? Is there some magic vim command which will allow me to do it in less than even 5 presses - and some way to generalise it so that I can do it to entire words or symbols, eg if I want to convert 3==4 to 3 == 4?
Personally, I think it makes most sense to destroy what you want to surround, and then repaste it.
c w "" ESC P
Obviously, you can replace both the object and the quotes with whatever you like. To change just one character + to be [space]+[space], you would do
s [space] [space] ESC P
on the +
The first thing that jumps to mind after reading just the title is surround.vim which is an excellent script to do all kinds of useful things along the lines of what you've described.
To solve your specific problem, I would probably position the cursor on the + and:
s[space]+[space][esc]
To change 3==4 into 3 == 4, I might position the cursor on the first =, and:
i[space][esc]ww.
i have been wondering about this as well. i tried with surround.vim, but the naive approach
S<space>
(after making a visual selection) does not work since the space is already taken up as a modifier for adding space to other surrounding character pairs. S<space><cr> adds a ^M in the output. Ss almost works but inserts a space only before.
after asking at tpope/surround.vim on github:
S<space><space>
in visual mode works. alternatively, from normal mode, ysl<space><space> works for a single character
Hah! I've been trying to figure out how to surround a block in spaces for quite a while and I finally found the right combination.
Using surround.vim you say surround selector space space.
So for this specific case I would use visual mode (a good trick for operating on single characters under the cursor BTW) thus: "vs " <- four key presses!
I also have a habit of typing things like argument lists without spaces. With this technique you can just navigate to the second argument using w and say "vws " to visually select a word and surround with spaces.
I prefer visual select mode generally. Also the alternate surround syntax "ysw " excludes the word final comma that is caught by "vw".
You could create a macro with one of the described actions and call it everytime you need it (Like amphetamachine proposed while I was writing) or you could simply search & replace:
:%s/\(\d\)\(+\|-\)\(\d\)/\1 \2 \3/g
You probably have to execute this command two times because it will only find every second occurence of +/-.
EDIT:
This will replace everything without the need to be called twice:
:%s/\d\#<=+\|-\d\#=/ \0 /g
Try positioning your cursor over the '+' and typing this:
q1i[space][right arrow][space][left arrow][esc]q
This will record a quick macro in slot 1 that you can re-use whenever you feel like it, that will surround the character under the cursor with spaces. You can re-call it with #1.
There is also the more versatile one:
q1ea[space][esc]bi[space][right arrow][esc]q
Which will surround the word under the cursor ("==" counts as a word) with spaces when you hit #1.
You could set up a mapping like this (press enter in visual mode to wrap spaces):
:vnoremap <CR> <ESC>`<i<SPACE><ESC>`>la<SPACE><ESC>h
This method allows you to use . to repeat the command at the next +.
Put your cursor over the + and type:
s[SPACE][CTRL-R]"[SPACE][ESC]
I know this is and old thread, but this might be useful to someone. I've found that the map (map it to anything else you want!)
noremap <leader>ss diwi<SPACE><C-R>"<SPACE><ESC>B
works ok both for turning 'a+b' into 'a + b' (when used over the '+' char) and for turning 'a==b' into 'a == b' (when used over either the first or the second '=' sign).
I hope it's useful to someone.
I have this dataset in a csv file
1.33570301776, 3.61194e-06, 7.24503e-06, -9.91572e-06, 1.25098e-05, 0.0102828, 0.010352, 0.0102677, 0.0103789, 0.00161604, 0.00167978, 0.00159998, 0.00182596, 0.0019804, 0.0133687, 0.010329, 0.00163437, 0.00191202, 0.0134425
1.34538754675, 3.3689e-06, 9.86066e-06, -9.12075e-06, 1.18058e-05, 0.00334344, 0.00342207, 0.00332897, 0.00345504, 0.00165532, 0.00170412, 0.00164234, 0.00441903, 0.00459294, 0.00449357, 0.00339737, 0.00166596, 0.00451926, 0.00455153
1.34808186291, -1.99011e-06, 6.53026e-06, -1.18909e-05, 9.52337e-06, 0.00158065, 0.00166529, 0.0015657, 0.0017022, 0.000740644, 0.00078635, 0.000730052, 0.00219736, 0.00238191, 0.00212762, 0.00163783, 0.000750669, 0.00230171, 0.00217917
As you can see, the numbers are formatted differently and misaligned. Is there a way in vim to quickly align the columns properly, so that the result is this
1.33570301776, 3.61194e-06, 7.24503e-06, -9.91572e-06, 1.25098e-05, 0.0102828, 0.010352, 0.0102677, 0.0103789, 0.00161604, 0.00167978, 0.00159998, 0.00182596, 0.0019804, 0.0133687, 0.010329, 0.00163437, 0.00191202, 0.0134425
1.34538754675, 3.3689e-06, 9.86066e-06, -9.12075e-06, 1.18058e-05, 0.00334344, 0.00342207, 0.00332897, 0.00345504,0.00165532, 0.00170412, 0.00164234, 0.00441903, 0.00459294, 0.00449357, 0.00339737, 0.00166596, 0.00451926, 0.00455153
1.34808186291, -1.99011e-06, 6.53026e-06, -1.18909e-05, 9.52337e-06, 0.00158065, 0.00166529, 0.0015657, 0.0017022, 0.000740644,0.00078635, 0.000730052,0.00219736, 0.00238191, 0.00212762, 0.00163783, 0.000750669,0.00230171, 0.00217917
That would be great to copy and paste sections with ctrl-v. Any hints?
If you're on some kind of UNIX (Linux, etc), you can cheat and filter it through the column(1) command.
:%!column -t
The above will parse on delimiters inside string literals which is wrong, so you will likely need pre-processing steps and specifying the delimiter for this file for example:
%!sed 's/","/\&/' | column -t -s '&'
Sometimes we want to align just two columns. In that case, we don't need any plugins and can use pure Vim functionality like this:
Choose a separator. In OP's post this is a comma, in my example this is =.
Add spaces before/after it. I use s/=/= ...spaces... / in visual selection for this.
Locate to the longest word and place cursor after it.
Remove all the extra whitespace using dw and vertical movement.
Example of this technique demonstrated below:
I don't find myself needing to align things often enough to install another plugin, so this was my preferred way of accomplishing it - especially that it doesn't require much thinking.
As sunny256 suggested, the column command is a great way of doing this on Unix/Linux machines, but if you want to do it in pure Vim (so that it can be used in Windows as well), the easiest way is to install the Align plugin and then do:
:%Align ,
:%s/\(\s\+\),\s/,\1/g
The first line aligns the entries on the commas and the second moves the comma so that it's flush with the preceding value. You may be able to use AlignCtrl to define a custom mapping that does the whole lot in one go, but I can never remember how to use it...
Edit
If you don't mind two spaces between entries and you want to do this in one command, you can also do:
:%Align ,\zs
This is a great answer using vim macros: https://stackoverflow.com/a/8363786/59384 - basically, you start recording a macro, format the first column, stop recording then repeat the macro for all remaining lines.
Copy/pasted from that answer:
qa0f:w100i <Esc>19|dwjq4#a
Note the single space after the 100i, and the <Esc> means "press escape"--don't type "<Esc>" literally.
Translation:
qa -- record macro in hotkey a
0 -- go to beginning of line
f: -- go to first : symbol
w -- go to next non-space character after the symbol
100i <Esc> -- insert 100 spaces
19| -- go to 19th column (value 19 figured out manually)
dw -- delete spaces until : symbol
j -- go to next line
q -- stop recording macro
4#a -- run the macro 4 times (for the remaining 4 lines)
We now also have the fabulous EasyAlign plugin, written by junegunn.
Demonstration GIF from its README:
Also, Tabularize is quite good http://vimcasts.org/episodes/aligning-text-with-tabular-vim/
You could use the csv.vim plugin.
:%ArrangeColumn
However, this will not do exactly what you have asked: it will right adjust the contents of cells, whereas you have your values aligned by the decimal point or by the first digit.
The plugin has many other useful commands for working with CSV files.
also if you have very long columns it can be handy to disable default wrapping
:set nowrap
:%!column -t
(note in debian you also have a further option for column -n which if you want to split multiple adjacent delimiters)
Here’s a pure Vim script answer, no plugins, no macros:
It might be most clear to start out with my problem’s solution as an example. I selected the lines of code I wanted to affect, then used the following command (recall that entering command mode from visual mode automatically prepends the “'<,'>”, so it acts on the visual range):
:'<,'>g``normal / "value<0d>D70|P`
Except I did NOT actually type “<0d>”. You can enter unprintable characters on the command line by pressing ctrl-v, then the key you want to type. “<0d>” is what is rendered on the command line after I typed ‘ctrl-v enter’. Here, it’s parsed by the “normal” command as the exit from “/” search mode. The cursor then jumps to “ value” in the current line.
Then we simply [D]elete the rest of the line, jump to column 70 (or whatever you need in your case), and [P]ut what we just deleted. This does mean we have to determine the width of the widest line, up to our search. If you haven’t put that information in your statusline, you can see the column of the cursor by entering the normal mode command ‘g ctrl-g’. Also note that jumping to a column that doesn’t exist requires the setting 'virtualedit'!
I left the search term for the :g(lobal) command empty, since we used a visual block and wanted to affect every line, but you can leave off using a visual selection (and the “'<,'>”) and put a search term there instead. Or combine a visual selection and a search term to narrow things more finely/easily.
Here’s something I learned recently: if you mess up on a complex command mode command, undo with ‘u’ (if it affected the buffer), then press “q:” to enter a special command history buffer that acts much like a conventional buffer. Edit any line and press enter, and the changed command is entered as a new command. Indispensable if you don’t want to have to stress over formulating everything perfectly the first time.
I just wrote tablign for this purpose. Install with
pip3 install tablign --user
Then simply mark the table in vim and do
:'<,'>:!tablign
Pretty old question, but I've recently availed myself of an excellent vim plugin that enables table formatting either on the fly or after-the-fact (as your use case requires):
https://github.com/dhruvasagar/vim-table-mode
I have this in my .vimrc.
command! CSV set nowrap | %s/,/,|/g | %!column -n -t -s "|"
This aligns the columns while keeping the comma, which may be needed later for correct reading. For example, with Python Pandas read_csv(..., skipinitialspace=True), thanks Pandas guys for this smart option, otherwise in vim %s/,\s\+/,/g. It may be easier if your column has the option --output-separator I guess, my doesn't and I'm not sure why (my man page for column says 2004, on ubuntu 18.04, not sure ubuntu will get a new version). Anyway, this works for me, and comment if you have any suggestions.
I made a cli tool written in Perl.
You can find it here: https://github.com/bas080/colcise
In Unix the ^ allows you to repeat a command with some text substituted for new text. For example:
csh% grep "stuff" file1 >> Results
grep "stuff" file1
csh% ^file1^file2^
grep "stuff" file2
csh%
Is there a Vim equivalent? There are a lot of times I find myself editing minor things on the command line over and over again.
Specifically for subsitutions: use & to repeat your last substitution on the current line from normal mode.
To repeat for all lines, type :%&
q: to enter the command-line window (:help cmdwin).
You can edit and reuse previously entered ex-style commands in this window.
Once you hit :, you can type a couple characters and up-arrow, and it will character-match what you typed. e.g. type :set and it will climb back through your "sets". This also works for search - just type / and up-arrow. And /abc up-arrow will feed you matching search strings counterchronologically.
There are 2 ways.
You simply hit the . key to perform an exact replay of the very last command (other than movement). For example, I type cw then hello to change a word to "hello". After moving my cursor to a different word, I hit . to do it again.
For more advanced commands like a replace, after you have performed the substition, simply hit the : key then the ↑ up arrow key, and it fills your command line with the same command.
To repeat the previous substition on all lines with all of the same flags you can use the mapping g&.
If you have made a substitution in either normal mode :s/A/B/g (the current line) or visual mode :'<,>'s/A/B/g (lines included in the current selection) and you want to repeat that last substitution, you can:
Move to another line (normal mode) and simply press &, or if you like, :-&-<CR> (looks like :&), to affect the current line without highlighting, or
Highlight a range (visual mode) and press :-&-<CR> (looks like :'<,'>&) to affect the range of lines in the selection.
With my limited knowledge of Vim, this solves several problems. For one, the last visual substitution :'<,'>s/A/B/g is available as the last command (:-<UP>) from both normal and visual mode, but always produces an error from normal mode. (It still refers to the last selection from visual mode - not to the empty selection at the cursor like I assumed - and my example substitution exhausts every match in one pass.) Meanwhile, the last normal mode substitution starts with :s, not :'<,'>s, so you would need to modify it to use in visual mode. Finally, & is available directly from normal mode and so it accepts repetitions and other alternatives to selections, like 2& for the next two lines, and as user ruohola said, g& for the entire file.
In both versions, pressing : then & works as if you had pressed : and then retyped s/A/B/, so the mode you were in last time is irrelevant and only the current cursor line or selection determines the line(s) to be affected. (Note that the trailing flags like g are cleared too, but come next in this syntax too, as in :&g/: '<,'>&g. This is a mixed blessing in my opinion, as you can/must re-specify flags here, and standalone & doesn't seem to take flags at all. I must be missing something.)
I welcome suggestions and corrections. Most of this comes from experimentation just now so I'm sure there's a lot more to it, but hopefully it helps anyway.
Take a look at this: http://vim.wikia.com/wiki/Using_command-line_history for explanation.