I would like to include common resources into two of my applications. Rather than using a DLL, I figured I could include common resources at compile/link time by making use of a .RC2 file.
I've added a load of BITMAP entries as follows to my .RC2 file
IDB_CHECK BITMAP DISCARDABLE "\NewGUILib\res\bmpCheck.bmp"
My .EXE definitely increases in size when the .RC2 file contains these bitmaps. However, when I try to use the resource IDs in my application (CBitmap::LoadBitmap( id )), the functions fail. LoadBitmap( IDB_CHECK ) returns zero. However, if I use a resource added to the .RC1 file via Visual Studio, that works.
Is there something else I need to do to use these .RC2 resources??
OK, I found the answer to my problem. The problem is that I didn't have any resource ID's included in the .RC2 file. In the example above IDB_CHECK was not defined. An error or warning during resource compilation would have been useful.. but.. I guess I expect too much.. All sorted.
Related
I have a cucumber feature file 'A' that serves as setting up environment (data clean up and initialization). I want to have it executed before all other feature files can run.
It's it kind of like #before hook as in http://zsoltfabok.com/blog/2012/09/cucumber-jvm-hooks/. However, that does not work because my feature files 'A' contains hundreds of cucumber steps and it is not as simple as:
#Before
public void beforeScenario() {
tomcat.start();
tomcat.deploy("munger");
browser = new FirefoxDriver();
}
instead it's better to be able to run 'A' as a feature file as a whole.
I've searched around but did not find a answer. I am so surprised that no one has this type of requirement before.
The closest i found is 'background'. But that means i can have only one huge feature file with the content of 'A' as 'background' at the top, and rest of my test in the same file. I really do not want to do that.
Any suggestions?
By default, Cucumber features are run single thread in order by:
Alphabetically by feature file directory
Alphabetically by feature file name within directory
Scenario execution is then by order within the feature file.
So have your initialization feature in the first directory (alhpabetically) with a file name that sorts first (alphabetically) in that directory.
That being said it is generally a bad practice to require an execution order in your feature files. We run our feature files in parallel so order is meaningless. For Jenkins or TeamCity you could add a build step that executes the one feature file followed by a second build step that executes the rest of your feature files.
I have also a project, where we have a single feature file, that contains a very long scenario called Scenario: Test data with a lot of very long scenarios, like this:
Given the system knows about the following employees
|uuid|user-key|name|nickname|
|1|0101140000|Anna|annie|
... hundreds of lines like this follow ...
We see this long SystemKnows scenarios as quite valuable, so that our testers, Product Owner and developers have a baseline of what data are in the system. Our domain is quite complex, and we need this baseline of reference data for everyone to be able to understand the tests.
(These reference data become almost like well known personas, and are a shared team metaphore)
In the beginning, we were relying on the alphabetic naming convention, to have the AAA.feature to be run first.
Later, we discovered that this setup was brittle, and decided to use the following trick, inspired by the PageObject pattern:
Add a background with the single line Given(~'^I set test data for all feature files$')
In the step definition, have a factory to create the test data, and make sure inside the factore method, that it is only created once, like testFactory.createTestData()
In this way, you have both the convenience of expressing reference setup as a scenario, that enhances team communication, but you also have a stable test setup.
Hope this is helpful!
Agata
This might be simple operation.. but this is my first time working with a big solution file and adding files to a project
I have a class library project(say a user control library) within that is a part of a bigger solution with (about 100+ project) all of this is connected to TFS. As soon as I add a class file to the project, it checks out the project file and the file gets added, but then I notice a maximum number of errors exceed and that project build errors start showing up.
This might a real simple thing I am missing, but what is the best way to resolve this issue.
The issue I get is a lot of
- 'namesspace x 'not a member of 'y'
- Type namespace x' is not define.
x namesspace cannot be converted to y namespace.
and eventually, maximum number of errors exceeded.
This simple answer is to fix your namespaces or add the missing projects/references. Generally speaking the error you are talking about is due to the code not being able to locate certain dependencies - such as other class files.
This typically happens when you haven't added all of the relevant projects and/or references.
I could not believe this: it seems that the zip specification does not allow two different files with the same file name going into one zip file.
In my case I use an external file to specify all the files I wanna zip.
This could look like this:
../Website1/favicon.ico
../Website2/favicon.ico
and there we are, that's not possible, despite keeping the directory structure. You would expect the name to be <../Website1/favicon.ico> rather than but that does not seem to be the case, I get:
"Invalid ZIP request (cannot repeat names in Zip file)"
with WinZip. I tried the same with 7Zip - same result.
Strangely googling did not show many hits that really fit but those I found seem to confirm my findings. That's hard to believe since this limitation is very severe. I actually struggle to understand why this did not hit me a couple of decades earlier.
Am I overlooking something very basic here?
To be precise:
Adding these two files:
C:\Temp\Website1\FavIcon
C:\Temp\Website2\FavIcon
results in a single file; the last Add wins...
This however:
Website1\FavIcon
Website2\FavIcon
results in a zip file that contains both files.
I have a project structure like -
proj_Main
proj_A(directory)
somefile.cs(etc.)
proj_A.csproj
proj_B(dir)
somefile.cs
proj_B.csproj
proj_C(dir)
somefile.cs
proj_C.csproj
proj_D(dir)
somefile.cs
proj_D.csproj
proj_Main(dir)
other dirs etc.
some.cs files
proj_Main.csproj
proj_Main.csproj.user
proj_Main2010.csproj
proj_Main2010.csproj.user
proj_Main2010.v11.suo
proj_A.sln
proj_B.sln
proj_C.sln
proj_D.sln
proj_Main.sln
proj_Main2010.sln
(There are actually more than 10 solutions inside it, to keep it simple, I have depicted 4 above.)
While opening it in VS 2012 I have opened proj_Main2010.sln and it shows other linked projects with it, opens them inside the solution. This proj_Main refers the dll of other projects from those other projects. So far fine.
Now I have to modify the code from all project files, but if I do that, the previously referenced classes and code stops working, and throws errors of all sort -
Error 2 The type or namespace name 'XXXX' could not be found (are you missing a using directive or an assembly reference?)
I am not sure, If this is the correct way to depict the scenario, my apologies for that.
My problem is, I am not sure If I am opening the right file to work on this solution or if I am trying to modify the files safely.
Any suggestions would be appreciated.
p.s. I also have a setup project in it ( but I guess its related to deploying an application not useful while developing /redeveloping it)
I am having a hard time with a seemingly simple Azure program.
My exercise is to create WorkerRole that spawns "helloworld.exe"
- which does just that - prints "hello world" and exits.
I am using Visual Studio to create a project,
then added new folder to project solution "bin2" where I put hello.exe
using menu option "Add Existing Item".
then created local storage bin2 in ServiceDefinition.csdef:
so I can find my executable with RoleEnvironment:
string baseDir = RoleEnvironment.GetLocalResource("bin2").RootPath.Replace('\', '/');
string command = Path.Combine(baseDir, #"hello.exe");
then ran cspack.exe to create .csx directory.
Resulting .csx package got hello.exe in the correct location:
WorkerRole1.csx\roles\WorkerRole1\approot\bin2\hello.exe
then I started local development fabric with csrun.exe and get error from the parent process that bin2/hello.exe is missing.
Do I need to do something else to make csrun to copy hello.exe into "bin2".
Any ideas?
Thank you in advance,
Ivgard
I'm pretty sure I answered this question already (probably on the MSDN forum)? But the local resource you declare will give you a path entirely different from where you're putting your hello.exe. When you add the file to your project, it gets included with the rest of the code for your role. When you look up the local resource, you get a path to an empty directory which you can use to write and read data. Those two are completely separate and unrelated locations.
If you want to find your hello.exe that's under bin2, just look for the relative path, or use %RoleRoot%\approot\bin2 (or maybe it's %RoleRoot%\approot\bin\bin2?).