I am not convinced that is the right terminology but here is my situation.
I log into an Ubuntu server using ssh and start a node app that I wrote. I would like for the app to continue rinning even when I close the ssh window or when the window times out. I 'think' there is a way to do this by writing a .conf file for the app and placing it in /etc but I dont know where to go to learn how to do that.
Any tips?
You can use the program nohup to accomplish this. It is most likely already installed on your Ubuntu distribution, it was on my 12.04 install.
nohup node test.js &
This command kicks off node test.js. Output will be streamed to nohup.out so you can view what is has been doing later on if you so like. Even after the ssh session is ended, the process will keep right on going.
To kill the process later on, you can do a "killall node" or you can manually grep for the PID and kill it that way using "ps -ef | grep node"
Linux: Prevent a background process from being stopped after closing SSH client
I have this protocol port open to read remotely from Python, PHP applications but daily it crash and the port is unavailable as a result Python, PHP all client application fails
$ cat /var/tmp/server.sh
#!/bin/bash
while true; do tail -f /usr/local/freeswitch/log/freeswitch.log | nc -l -p 9999 -q 1 &
Q. Is there anyway to make this script always running like service this start or stop and if its crashed that somehow it automatically again get restarted ? Any advise or link to do such thing? i am using CentOS 6.x
Put your script in /etc/inittab as following
id:1:respawn:/var/tmp/server.sh
Refer to http://linux.about.com/od/commands/l/blcmdl5_inittab.htm for more information about the /etc/initab file.
After editing /etc/inittab restart your system.
I am trying to execute two scripts which are available as sh files on remote host having 755 permissions.
I try callling them from client host as below:
REMOTE_HOST="host1"
BOUNCE_SCRIPT="
/code/sys/${ENV}/comp/1/${ENV}/scripts/unix/stopScript.sh ${ENV};
/code/sys/${ENV}/comp/1/${ENV}/scripts/unix/startScript.sh ${ENV};
"
ssh ${REMOTE_HOST} "${BOUNCE_SCRIPT}"
Above lines are in a script on local host.
While running the script on local host, the first command on remote host i.e. stopScript.sh gets executed correctly. It kills the running process which it was inteded to kill w/o any error.
However output of second script i.e. startScript.sh gets printed to local host window but the process it intended to start does not start on remote host.
Can anyone please let me know?
Is the way executing script on remote host correct?
Should I see output of running script on remote host locally as well? i.e. on the window of local host?
Thanks
You could try the -n flag for ssh:
ssh -n $REMOTE_HOST "$BOUNCE_SCRIPT" >> $LOG
The man page has further information (http://unixhelp.ed.ac.uk/CGI/man-cgi?ssh+1). The following is a snippet:
-n Redirects stdin from /dev/null (actually, prevents reading from
stdin).
Prefacing your startScript.sh line with 'nohup' may help. Often times if you remotely execute commands they will die when your ssh session ends, nohup allows your process to live after the session has ended. It would be helpful to know if your process is starting at all or if it starts and then dies.
I think cyber-monk is right, you should launch the processes with nohup to create à new independent process. Look if your stop script is killing the right process (the new one included).
I like to ask what is best way to start jboss AS.
Because, whenever i close terminal or press ctrl+c then jboss, which is already started with run.sh script, start with shutdown. I have already tried executing export LAUNCH_JBOSS_IN_BACKGROUND=1 before starting jboss via script .run.sh but it has not helped me much.
Secondly, i like to know how can i validate that jboss is running except browsing localhost:8080 or localhost:8080/admin-console.
I am using both mac-osx/linux and Jboss-AS-6.0.0.Final.
nohup /usr/local/jboss/bin/run.sh -b 0.0.0.0 > /dev/null & should do starting jb as well running it in background.
You can check for jboss running using ps -ef | grep java
For the first part of the question, try running:
./run.sh &
This will send the process to the background. Just hit enter once JBoss has finished starting up.
If you need to bring the process back to the foreground, run fg. You can then hit CTRL-C if you want stop JBoss.
To validate that jboss is running, you can run something like this :
ps -ef | grep jboss
or
ps -ef | grep run.sh
This will show the process id for JBoss or the run.sh script.
I hope this helps.
I'm trying to ensure a script remains running on a development server. It collates stats and provides a web service so it's supposed to persist, yet a few times a day, it dies off for unknown reasons. When we notice we just launch it again, but it's a pain in the rear and some users don't have permission (or the knowhow) to launch it up.
The programmer in me wants to spend a few hours getting to the bottom of the problem but the busy person in me thinks there must be an easy way to detect if an app is not running, and launch it again.
I know I could cron-script ps through grep:
ps -A | grep appname
But again, that's another hour of my life wasted on doing something that must already exist... Is there not a pre-made app that I can pass an executable (optionally with arguments) and that will keep a process running indefinitely?
In case it makes any difference, it's Ubuntu.
I have used a simple script with cron to make sure that the program is running. If it is not, then it will start it up. This may not be the perfect solution you are looking for, but it is simple and works rather well.
#!/bin/bash
#make-run.sh
#make sure a process is always running.
export DISPLAY=:0 #needed if you are running a simple gui app.
process=YourProcessName
makerun="/usr/bin/program"
if ps ax | grep -v grep | grep $process > /dev/null
then
exit
else
$makerun &
fi
exit
Then add a cron job every minute, or every 5 minutes.
Monit is perfect for this :)
You can write simple config files which tell monit to watch e.g. a TCP port, a PID file etc
monit will run a command you specify when the process it is monitoring is unavailable/using too much memory/is pegging the CPU for too long/etc. It will also pop out an email alert telling you what happened and whether it could do anything about it.
We use it to keep a load of our websites running while giving us early warning when something's going wrong.
-- Your faithful employee, Monit
Notice: Upstart is in maintenance mode and was abandoned by Ubuntu which uses systemd. One should check the systemd' manual for details how to write service definition.
Since you're using Ubuntu, you may be interested in Upstart, which has replaced the traditional sysV init. One key feature is that it can restart a service if it dies unexpectedly. Fedora has moved to upstart, and Debian is in experimental, so it may be worth looking into.
This may be overkill for this situation though, as a cron script will take 2 minutes to implement.
#!/bin/bash
if [[ ! `pidof -s yourapp` ]]; then
invoke-rc.d yourapp start
fi
If you are using a systemd-based distro such as Fedora and recent Ubuntu releases, you can use systemd's "Restart" capability for services. It can be setup as a system service or as a user service if it needs to be managed by, and run as, a particular user, which is more likely the case in OP's particular situation.
The Restart option takes one of no, on-success, on-failure, on-abnormal, on-watchdog, on-abort, or always.
To run it as a user, simply place a file like the following into ~/.config/systemd/user/something.service:
[Unit]
Description=Something
[Service]
ExecStart=/path/to/something
Restart=on-failure
[Install]
WantedBy=graphical.target
then:
systemctl --user daemon-reload
systemctl --user [status|start|stop|restart] something
No root privilege / modification of system files needed, no cron jobs needed, nothing to install, flexible as hell (see all the related service options in the documentation).
See also https://wiki.archlinux.org/index.php/Systemd/User for more information about using the per-user systemd instance.
I have used from cron "killall -0 programname || /etc/init.d/programname start". kill will error if the process doesn't exist. If it does exist, it'll deliver a null signal to the process (which the kernel will ignore and not bother passing on.)
This idiom is simple to remember (IMHO). Generally I use this while I'm still trying to discover why the service itself is failing. IMHO a program shouldn't just disappear unexpectedly :)
Put your run in a loop- so when it exits, it runs again... while(true){ run my app.. }
I couldn't get Chris Wendt solution to work for some reason, and it was hard to debug. This one is pretty much the same but easier to debug, excludes bash from the pattern matching. To debug just run: bash ./root/makerun-mysql.sh. In the following example with mysql-server just replace the value of the variables for process and makerun for your process.
Create a BASH-script like this (nano /root/makerun-mysql.sh):
#!/bin/bash
process="mysql"
makerun="/etc/init.d/mysql restart"
if ps ax | grep -v grep | grep -v bash | grep --quiet $process
then
printf "Process '%s' is running.\n" "$process"
exit
else
printf "Starting process '%s' with command '%s'.\n" "$process" "$makerun"
$makerun
fi
exit
Make sure it's executable by adding proper file permissions (i.e. chmod 700 /root/makerun-mysql.sh)
Then add this to your crontab (crontab -e):
# Keep processes running every 5 minutes
*/5 * * * * bash /root/makerun-mysql.sh
The supervise tool from daemontools would be my preference - but then everything Dan J Bernstein writes is my preference :)
http://cr.yp.to/daemontools/supervise.html
You have to create a particular directory structure for your application startup script, but it's very simple to use.
first of all, how do you start this app? Does it fork itself to the background? Is it started with nohup .. & etc? If it's the latter, check why it died in nohup.out, if it's the first, build logging.
As for your main question: you could cron it, or run another process on the background (not the best choice) and use pidof in a bashscript, easy enough:
if [ `pidof -s app` -eq 0 ]; then
nohup app &
fi
You could make it a service launched from inittab (although some Linuxes have moved on to something newer in /etc/event.d). These built in systems make sure your service keeps running without writing your own scripts or installing something new.
It's a job for a DMD (daemon monitoring daemon). there are a few around; but I usually just write a script that checks if the daemon is running, and run if not, and put it in cron to run every minute.
Check out 'nanny' referenced in Chapter 9 (p197 or thereabouts) of "Unix Hater's Handbook" (one of several sources for the book in PDF).
A nice, simple way to do this is as follows:
Write your server to die if it can't listen on the port it expects
Set a cronjob to try to launch your server every minute
If it isn't running it'll start, and if it is running it won't. In any case, your server will always be up.
I think a better solution is if you test the function, too. For example, if you had to test an apache, it is not enough only to test, if "apache" processes on the systems exist.
If you want to test if apache OK is, then try to download a simple web page, and test if your unique code is in the output.
If not, kill the apache with -9 and then do a restart. And send a mail to the root (which is a forwarded mail address to the roots of the company/server/project).
It's even simplier:
#!/bin/bash
export DISPLAY=:0
process=processname
makerun="/usr/bin/processname"
if ! pgrep $process > /dev/null
then
$makerun &
fi
You have to remember though to make sure processname is unique.
One can install minutely monitoring cronjob like this:
crontab -l > crontab;echo -e '* * * * * export DISPLAY=":0.0" && for
app in "eiskaltdcpp-qt" "transmission-gtk" "nicotine";do ps aux|grep
-v grep|grep "$app";done||"$app" &' >> crontab;crontab crontab
disadvantage is that the app names you enter have to be found in ps aux|grep "appname" output and at same time being able to be launched using that name: "appname" &
also you can use the pm2 library.
sudo apt-get pm2
And if its a node app can install.
Sudo npm install pm2 -g
them can run the service.
linux service:
sudo pm2 start [service_name]
npm service app:
pm2 start index.js