I am trying to build an application which depends on Boost. So I downloaded Boost 1_41_0 to my Linux box and followed the instructions found on the Boost site for Unix variants,
http://www.boost.org/doc/libs/1_41_0/more/getting_started/unix-variants.html.
They basically suggest that I run ./bjam install, which I did. The build completed successfully. However, the library names don't seem to match the Boost naming convention described both in the documentation above, and what is specified in the makefile of the application I am trying to build.
I noticed that there are a bunch of options that I can specify to bjam and I tried to play with those, but no matter what happens I can't seem to get it quite right. My understanding is that the libraries should go into the $BOOST_ROOT/lib directory. This is where the libraries show up, but named:
libboost_thread.a
libboost_thread.so
libboost_thread.so.1.41.0
I'd expect them to be named libboost_thread-gcc41-mt-d-1_41_0 or something similar.
I did try ./bjam --build-type=complete --layout=tagged and I see:
libboost_thread.a
libboost_thread-mt.a
libboost_thread-mt-d.a
libboost_thread-mt-d.so
libboost_thread-mt-d.so.1.41.0
libboost_thread-mt-s.a
libboost_thread-mt-sd.a
libboost_thread-mt.so
libboost_thread-mt.so.1.41.0
libboost_thread.so
libboost_thread.so.1.41.0
So, I am not sure if I should just make stage my -L directory? Is there any documentation which describe this in more detail?
The names was changed in 1.40.0 - see in release notes:
Build System
The default naming of libraries in
Unix-like environment now matches
system conventions, and does not
include various decorations.
They probably forgot to update this part in the build documentation.
There are two variables here. First is "install" vs. "stage" (default). "install" copies both libraries and headers into a directory -- /usr/local by default, and you can then remove source tree. "stage" puts libraries to "stage/lib", and you should add "-L /stage/lib -I " flags.
Second is --layout=versioned and --layout=system. It seems like you have discovered what they do already, and indeed, system is default since 1.40. The getting started guide fails to mention this, and I've added an action item to update it. Ideally, you should talk to the authors of the application to use the system naming of boost libraries. If that's not possible, then building with --layout=versioned is the only option.
From the Boost documentation at http://www.boost.org/doc/libs/1_35_0/more/getting_started/windows.html#library-naming, the convention is:
-mt Threading tag: indicates that the library was built with multithreading support enabled. Libraries built without multithreading support can be identified by the absence of -mt.
-d ABI tag: encodes details that affect the library's interoperability with other compiled code. For each such feature, a single letter is added to the tag:
Key Use this library when:
s linking statically to the C++ standard library and compiler runtime support libraries.
g using debug versions of the standard and runtime support libraries.
y using a special debug build of Python.
d building a debug version of your code.
p using the STLPort standard library rather than the default one supplied with your compiler.
n using STLPort's deprecated “native iostreams” feature.
For example, if you build a debug version of your code for use with debug versions of the static runtime library and the STLPort standard library in “native iostreams” mode, the tag would be: -sgdpn. If none of the above apply, the ABI tag is ommitted.
Related
Apparently anything GUI-related in terms of components involves XML. I cannot go around actually configuring and building wxWidgets from source because of that. I'm new to wxWidgets.
My current setup is on Win10 with MSVC v141 (Visual Studio 2017) with the latest CMake version (currently 3.21).
Inside the config.cmake of the wxWidgets projects (using latest master branch) I see
wx_get_dependencies(EXTRALIBS_XML xml)
I am also calling CMake with -DwxUSE_XML=ON (among other parameters) but this still leads to:
the XML dependency is nowhere to be found
respectively it's not built
Linking then fails with the following error:
LINK : fatal error LNK1104: cannot open file 'wxxml.lib' [C:\Users\...\CMakeBuilds\ef5b5ada-ee42-7735-988a-ae37c735ccff\build\deps\build\wxwidgets\libs\qa\wxqa.vcxproj]
What library is actually wxWidgets using and how do I trigger it's retrieval and accordingly configuration and building? Since I am adding wxWidgets to my CMake project as an ExternalProject component, I would appreciated something in that line of thought. However any kind of information regarding this issue is more than welcome especially since it will shine light on how to configure other features (if I want them in the future) such as WebView.
The wxxml.lib issue is fixed now. While fixing it I also discovered a bug (of sort) in the build system of wxWidgets.
The reason why it failed to build this library in particular was actually quite simple but due to the lack of knowledge in the dependencies of wxWidgets. I thought that wxWidgets, given it depends on XML so much, has its own XML parser. Well, not really. The wxXML component actually uses and underlying 3rd party dependency called EXPAT, which - as you can see in my question - I have deactivated since it was giving me issues during the build (due to the still present problem of not being able to automatically retrieve dependencies).
What I did was to clone the libexpat repository, add it as an ExternalProject, set the variables for the libraries and include directory and pass them onto my wxWidgets project. But there is a catch...
The expat.cmake file looks as follows:
#############################################################################
# Name: build/cmake/lib/expat.cmake
# Purpose: Use external or internal expat lib
# Author: Tobias Taschner
# Created: 2016-09-21
# Copyright: (c) 2016 wxWidgets development team
# Licence: wxWindows licence
#############################################################################
if(wxUSE_EXPAT STREQUAL "builtin")
# TODO: implement building expat via its CMake file, using
# add_subdirectory or ExternalProject_Add
wx_add_builtin_library(wxexpat
src/expat/expat/lib/xmlparse.c
src/expat/expat/lib/xmlrole.c
src/expat/expat/lib/xmltok.c
)
set(EXPAT_LIBRARIES wxexpat)
set(EXPAT_INCLUDE_DIRS ${wxSOURCE_DIR}/src/expat/expat/lib)
elseif(wxUSE_EXPAT)
find_package(EXPAT REQUIRED)
endif()
I would use the *.cmake files of the 3rd party dependencies stored inside <ROOT_OF_WXWIDGETS_PROJECT>/build/cmake/lib to determine which variables I need to set if builtin is selected as the value for the respective library. Since I want to use my own I need sys (e.g. -DwxUSE_EXPAT=sys as a CMAKE_ARGS inside my wxWidgets ExternalProject) and also to pass the headers and libraries accordingly.
Given the file above one would assume that EXPAT_LIBRARIES is required. However after failing to build (yet again) and seeing that the reason was the activated expat build and that it was set as builtin I checked the log in detail and found the following error:
Could NOT find EXPAT (missing: EXPAT_LIBRARY) (found version "2.2.6")
Notice the EXPAT_LIBRARY. After passing it (-DEXPAT_LIBRARY=...) my build was complete. For me this is a bug or simply inconsistency between the dependency cmake file and the rest of the wxWidgets project.
It is important to note that I do not retrieve the external dependency through wxWidgets itself (see config.cmake and more precisely the macro wx_get_dependencies(...)). This solves the problem with a basic configuration and build of wxWidgets but if you don't want to tackle every dependency of wxWidgets on your own (why should you?), I recommend looking for a solution where the dependencies (at least the ones you don't want to deal with) are automatically retrieved, configured and build as builtin.
I'm setting up FREEGLUT and GLEW for Visual Studio2012 on Windows7 64bit.
First of all, should I need to set up also GLUT?
Second, I'm confused, in GLEW/lib and GLEW/bin there both Release and Release MX folder, which one should I pick files?
In regards to GLEW:
I suggest you use GLEW for now, and switch to GLEW MX (Multiple Rendering Contexts) once you need the additional functionality it provides.
According to http://glew.sourceforge.net/advanced.html
Starting with release 1.2.0, thread-safe support for multiple rendering contexts, possibly with different capabilities, is available. Since this is not required by most users, [GLEW MX] is not added to the binary releases to maintain compatibility between different versions.
Here is how you build glew:
Note: Just because you are using a 64 bit machine, doesn't mean that you have Visual Studio set up to run 64 bit applications. I suggest you use the 32 bit versions of libraries until you are ready to reap the benefits of using the 64 bit versions, as you can switch later.
1. Link your project with the static GLEW library in the lib folder. This is either glew32s.lib or GLEW depending on your platform.
Note: glew32s.lib is to link statically, glew32.lib (without the s) is to link dynamically. If you prefer to dynamically link with GLEW instead, leave out the define and link with glew32.lib instead of glew32s.lib on Windows. Don't forget to include glew32.dll or libGLEW.so with your executable!
2. Add the include folder to your include path.
3. Include the header in your program, but make sure that it is included before the OpenGL headers or the library you used to create your window.
In regards to GLUT:
Could someone else answer (or edit my answer), as I have not used GLUT yet.
Additional Sources Used For This Answer:
https://open.gl/
I'm trying to build my application with MSVC 2010 instead of GCC. With GCC everything works fine. My app uses boost_system and boost_thread libraries.
I built boost with VC2010 in "system" layout, that means the libraries are named just libboost_system.lib (and not libboost_system_compiler_threading_version_wtf_snafu.lib)
The libs reside in C:\Boost\lib,
the Makefile specifies
LFLAGS = /NOLOGO /INCREMENTAL:NO /SUBSYSTEM:CONSOLE
LIBS = /LIBPATH:C:/Boost/lib libboost_system.lib libboost_thread.lib Ws2_32.lib
when invoking nmake it compiles, but when trying to link it quits with
LINK : fatal error LNK1104: cannot open file 'libboost_date_time-vc100-mt-1_43.lib
I mean seriously, WTF? I told it to link libboost_systen.lib and libboost_thread.lib how come it tries to link libboost_data_time and why does it assume I built the libs in "tagged" layout??
How can I stop MSVC trying to be smart and guess what I might have wanted to link?
Thanks,
Philipp
This is a feature of the Boost libs with compatible compilers for automatic linking.
(Those convoluted library names cover the myriad of threading and linking options that are available on the platform; there are good reasons to use that convention on Windows...)
More information here:
http://www.boost.org/doc/libs/1_33_1/more/getting_started.html#auto-link
I can't find a page for a more recent version, but I believe the BOOST_ALL_NO_LIB and related options are all still valid in 1.43.
Assuming you are auto-linking (i.e. you've defined BOOST_ALL_DYN_LINK or library specific equivalents).
For layout 'system' you have to define the preprocessor macro:
BOOST_AUTO_LINK_NOMANGLE
to link to the correct library names.
For layout 'tagged' you have to define the preprocessor macro:
BOOST_AUTO_LINK_TAGGED
to link to the correct library names.
I don't know if you could do this override for some libraries and keep the default for others. That would be a very cumbersome setup I'd imagine.
I'm trying to compile a piece of software which has the standard build process e.g.
configure
make
make install
The software requires a library e.g. libreq.so which is installed in /usr/local/lib. However, my problem is I'd like to build the software and link it with a different version of the same library (i have the source for the library as well) that I've installed in /home/user/mylibs.
My question is, how do I compile and link the software against the library in /home/user/mylibs rather than the one in /usr/local/lib
I tried setting "LD_LIBRARY_PATH" to include /home/user/mylibs but that didn't work.
Thanks!
When you have an autoconf configure script, use:
CPPFLAGS=-I/home/user/include LDFLAGS=-L/home/user/mylibs ./configure ...
This adds the nominated directory to the list of directories searched for headers (usually necessary when you're using a library), and adds the other nominated directory to the list searched for actual libraries.
I use this all the time - on my work machine, /usr/local is 'maintained' by MIS and contains obsolete code 99.9% of the time (and is NFS-mounted, read-only), so I struggle to avoid using it at all and maintain my own, more nearly current, versions of the software under /usr/gnu. It works for me.
Try using LD_PRELOAD set to your actual file.
LD_LIBRARY_PATH is for finding the dynamic link libraries at runtime. At compiling you should add -L parameters to gcc/g++ to specify in which directory the *.so files are. You also need to add the library name with -l<NAME> (where the library is libNAME.so).
Important! For linking you not only need the libNAME.so file but a libNAME.a is needed too.
When you run the application, don't forget to add the dir to the LD_LIBRARY_PATH.
When you added the /home/user/mylibs to the LD_LIBRARY_PATH did you add it to the front or end of the existing paths? The tokens are searched in-order so you will want yours to appear first in the list.
Also, many standard build environments that use configure will allow you to specify an exact library for each required piece. You will have to run ./configure --help but you should see something like --using-BLAH-lib=/path/to/your/library or similar.
I don't know if it's possible to do this, but I would like the /NODEFAULTLIB to be applied to a static library project.
I have many application projects (A.exe, B.dll, C.dll) that use a common static library D.lib.
This library has a lot of code and also has other .lib dependencies as well. One of them is the openssl library, which seems to have been built for win32 against the Release version of the CRT (i don't have the original project/sources).
So far, to avoid the mixing of the Release/Debug versions of CRT, I have to put the /NODEFAULTLIB:msvcrt.lib linker directive in all leaf projects (A.exe, B.dll). This works but I think it's not the ideal way of dealing with that issue.
I tried to put this property in D.lib project, but it has no effect.
Is there a way to force msvc++ to ignore the msvcrt.lib dependency from the 3rd party library?
A .lib does not have any linker settings because you don't link it, you link to it. A .lib is just an archive of .obj files, sort of like an uncompressed .zip file - that's why you have to put the setting on all projects that link to it.
If you're using VS2005+ you could use property sheets so that you only have to put the setting in one place and then use that property sheet in all projects.
However, OpenSSL is just that - Open Source, so you should be able to get the source for the version you are using and build it again (and add it to your version control system of course). I thought OpenSSL could be built as a DLL or LIB, which would solve your problem as the DLL would not interfere with the linking of your code.
Failing that, you always have the option of slitting your functionality out into a separate DLL so that you only have issues with one project.
To prevent your distributed static link library from depending on a specific MSVC runtime library you need to set this compiler option (in Visual Studio 2010 it looks like):
Configuration Properties -> C/C++ -> Advanced -> Omit Default Library Name = Yes (/ZI)
Now your users can link to your release built static lib from their debug build and not try to link to the incorrect runtime library causing problems, as well as linkers warnings.
Note that may cause link errors if your library actually depends on a specific runtime library or its behavior, and compatible components are not provided in some other way.
My understanding is that if library LIB in linked statically into a DLL, the DLL contains already all relevant code from LIB. Therefore, this coupling cannot be removed. This is just based on my understanding of statical linking, not on experiments.