Need some advise to begin programming on ARM (with linux) platform - linux

I will have (maybe) to work soon on ARM platform hosting a linux distribution (I don't know which distribution ..).
I know the project concerns video streaming, but I can't tell you more. Actually I only received the announe, and meet nobody yet.
I've never worked on such platform. So the idea for me is to test before the project starts.
What would you advise me to undestand how works such platform ? Internet links? Tutorials? Tools
Morevover, as I don't have any ARM processor at home (well only my iPhone ..) Which virtual machine would you advise me? (I clearly don't want to lose time installing and testing every one of them.)
I am aware of this page on wikipedia. Which one is the more appropriate running on a MacOS X 10.5/intel platform? Which linux distribution to install on the virtual machine?
I know the topic is quite wide, so any idea is welcomed! :-)

For a virtual machine that can emulate a ARM platform try QEMU. You can install a ARM-based Debian Linux distribution and tinker around with it. A google search on ARM, QEMU and Debian will get you started.
Also: Don't worry to much about the ARM CPU. You will use linux, so all the low-level stuff is already done for you. It's much more important to learn how the linux boot process works. How to install stuff ect. You will rarely (if ever) notice that you're running on a ARM device. The big difference to a PC running linux is, that the ARM will be a lot slower.
If you're looking for a real piece of hardware to play around with I suggest that you take a look at the beagleboard (www.beagleboard.org). It's cheap (around $150) and runs (among other things) various linux distributions.
With the beagleboard you'll get the whole linux cross compilation experience if you want (be warned: you'll pull your hair out).

I can't answer all of your questions, but there's a full port of Debian GNU/Linux on ARM. Works fabulously in my experience (I've tried it on a QNAP). Everything that's available in Debian works on QNAP now! So it's probably easiest to first try Debian tools and packages that come close to your project, and then continue from there.

Related

How to compile the Linux kernel to be as small as possible?

I'm working on a side project which requires me to configure and compile a tiny Linux System based on Ubuntu.
The result should be a tiny OS with the following features:
A Bootloader
A Kernel
A Process
A Thread
Miscellaneous (if possible)
A File System
Virtual memory
A Console
I read lots of documents about it, one of them being: http://users.cecs.anu.edu.au/~okeefe/p2b/buildMin/buildMin.html#toc3
I deleted the file system, and recompiled the kernel using make xconfig. I tried to deactivate modules and configurations many times, but it's not working for me.
How can I configure the kernel for the OS with only the features I listed above? What options can I disable or enable while still having a working system?
Having the Kernel very small is not important for Ubuntu, so maybe choosing Ubuntu is part of your problem. I would use as starting point what OpenWRT does. They do a good work making the Kernel small and it is easy to get started. OpenWrt Buildroot – Usage
try Linux From Scratch. It is a step by step approach on building a minimal Linux system from which you can evolve later on. http://www.linuxfromscratch.org/.
Use Gentoo Linux distribution - it's great for practicing on creation of Linux systems. Gentoo has excellent setup documentation, for example about configuring the kernel.
And Gentoo is a little easier and faster to setup than Linux From Scratch (LFS). If you want to go deeper, then LFS may be a good learning step too.

Tweaking linux kernel

I am new to linux programming & interested to tweak linux kernel(though I am not sure, what to tweak, I am planning to write drivers for particular device). To learn internal of kernel, I have started from historic kernel release (first release).
My problem is, how to test whatever changes I am doing for development, without disturbing my current os environment.(ubuntu 12, 64 bit). Is there any way like virtual box, sandbox?
Along with these, if anybody send some good approaches to learn these things, I would be really greatful.
Thank You.
If you're new to linux programming then you really don't want to be tweaking the kernel. You really want to be an advanced programmer capable of programming drivers and complex software first.
But yes there is, you can can create a virtual machine using openbox or vmware. If you're really keen on tweaking the kernel you probably want to first just try compiling and configuring the kernel and seeing if that works.
Also make sure you're well acquainted with how the kernel works and advanced OS designs in general.
Search in google fr "Kernel configuration" you u will get many links how to configure your own kernel.
And one more thing do not use a outdated version of kernel ,always use latest stable release , because a lot of code and API is changed in new versions and no book in market is updated so ,, u have to read from kernel documentation. Thats the best way to learn the most updated information about linux kernel
Yes, you can test your changes on any of the commonly available virtual machines (VMs); that way, whatever changes you make to the VM kernel won't affect native OS.
Personally, I prefer using CentOS 64 bit on VMWare Player. With this setup, I got away with minimal system maintenance while was able to focus on the actual job at hand. Once the VM is up & running, you can download and compile one of the latest stable releases from kernel.org. Instructions on compiling your downloaded version of kernel could be found here and here; however, this may require little tweaking based on your actual setup. Once the VM is running on your desired version of kernel, using a combination of cscope and ctags will help you immensely in kernel code browsing.
Finally, if you want to become a serious kernel programmer and write your own device drivers, you need to get familiar with it in the first place. Below are a few excellent references -
Linux Device Driver by Corbet, Rubini, Kroah-Hartman, 3rd edition
Linux Kernel Development by Robert Love, 3rd edition
Understanding the Linux Kernel by Bovet, Cesati
Linux kernel source (ideally placed into your /usr/src/$(DESIRED_KERNEL) path, symlinked to /usr/src/linux)
Going through these books is a tedious job and chances are that you may hit the roadblock from time to time. kernelnewbies mailing list and StackOverflow are some of the few reliable places where people would be happy to answer to your queries.
Good luck!

Comparative analysis between libkvm on linux and NetBSD

I want to build a sample program and as an initial step to learn KVM I started it from the link below.
http://www.linuxjournal.com/magazine/linux-kvm-learning-tool?page=0,1
I see that this is quite an old post for KVM, but I realize that the very first program does not compiles as it asks to include libkvm.h, which is not in my Ubuntu 13.04 installation.
To prepare for this program I installed qemu-kvm,dkms and libvirt stuff.
I also verified that the user has kvm and libvirtd in the group.
I am running Ubuntu on virtual-box on a modern i7 processor windows host.
So I have two different questions here -
1) Since I dont find libkvm.h in my box, what is the way compile my program and learn this kind of programming. If you have any tutorials please forward.
2) I got know that there is another libkvm that is used in BSD style Unix (e.g NetBSD/FreeBSD) that is used to access kernel data-strucrtures. From internet I see that GDB uses that library to fetch info from kernel memory. KVM in linux is a tool to create virtual machines on a Linux box. Is my understanding correct or is there anything more to it? Please provide a comparative analysis between these two libraries, namely libkvm on linux and libkvm on BSD?
As you already said, Linux KVM is a virtualisation technique whereas BSD kvm is much older, the acronym even expands to something different, and is a library to access (not only) kernel data structures in a defined manner.
They are totally separate and different things that have absolutely nothing to do with each other except for sharing the same acronym.
As do, for example, Keyboard-Video-Mouse switches. I was confused by all those Linux people talking about a “KVM” thing suddenly, back when Linux-KVM first came out, and not meaning those.

How do I compile mips gnu?

I am not even sure my thread title is correct or not. Here is my story. I visited western digital website to check for a new firmware of wdtv live. I found source code of wdtv live OS is available to download. I downloaded "WDTV GPL Code" on http://support.wdc.com/product/download.asp?groupid=1003&lang=en. I extracted it and...came up with
mips-4.3.tgz
linux_kernel_2.6.22.19-19.tgz
I googled about those two archive and I guess "mips-4.3.tgz" is operating system and "linux_kernel_2.6.22.19-19.tgz" is linux kernel obviously.
In my understanding, I need to have a running linux in order to compile linux kernel. So I assume that I have to install mips-4.3.tgz somehow.
Does anyone have any idea on how to install mips??
While these instructions seem to be geared towards the Android, maybe they can be of some use.

Cross Compiling Linux Kernels and Debugging via VMware

I'm considering doing some Linux kernel and device driver development under a vmware VM for testing ( Ubuntu 9.04 as a guest under vmware server 2.0 ) while doing the compiles on the Ubuntu 8.04 host.
I don't want to take the performance hit of doing the compiles under the VM.
I know that the kernel obviously doesn't link to anything outside itself so there shouldn't be any problems in that regard, but
are there any special gotcha's I need to watch out for when doing this?
beyond still having a running computer when the kernel crashes are there any other benefits to this setup?
Are there any guides to using this kind of setup?
Edit
I've seen numerous references to remote debugging in VMware via Workstation 6.0 using GDB on the host. Does anyone know if this works with any of the free versions of VMWare such as Server 2.0.
I'm not sure about ubuntu thing. Given that you are not doing a real cross compilation (i.e. x86->arm), I would consider using make-kpkg package. This should produce an installable .deb
archive with kernel for your system. this would work for me on debian, it might for for you
on ubuntu.
more about make-kpkg:
http://www.debianhelp.co.uk/kernel2.6.htm
I'm not aware of any gotchas. But basically it depends what kind of kernel part you
are working with. The more special HW/driver you need, the more likely VM won't work for you.
probably faster boots and my favorite is the possibility to take screenshot (cut'n'paste) of panic message.
try to browse to vmware communities. this thread looks very promising, although it dicusses
topic for MacOS:
http://communities.vmware.com/thread/185781
Compiling, editing, compiling is quite quick anyway, you don't recompile you whole kernel each time you modify the driver.
Before crashing, you can have deadlock, bad usage of resource that leads to unremovable module, memory leak etc ... All kind of things that needs a reboot even if your machine did not crash, so yes, this can be a good idea.
The gotchas can come in the form of the install step and module dependency generation, since you don't want to install your driver in the host, but in the target machine.

Resources