I am using FTP server which is working in local and able to fetch data from FTP server, but in the Azure cloud nifi server same FTP server is not fetching a single record from the particular FTP server. I am using ListFTP associated with FetchFTP nifi processor and used the same configuration whatever I used in local for ListFTP and FetchFTP nifi processors.
Can someone please suggest what is happening here. I checked firewall and even I disabled the firewall. That FTP server is running on Active connection mode. I tried but I'm not able to figure out the exact reason.
I am attaching the screenshots of my FTP processors configuration. One very important thing while using GetFTP server it is not fetching a single data after running hours of hours and even not a single exception or error. But with ListFTP and FetchFTP server it is showing exception after some 15 minutes interval that is "Failed to perform listing on remote host due to java.net.SocketException"
I think once you go through your conf/nifi.properties file and check whether keystore certificate is enabled or disabled and if it is disabled then do it enable.
Here you can check nifi configuration documentation.
I have TFS 2012 which integrated with SharePoint service, recently I duplicated the same machine for testing, and modified some parameters on the testing machine to avoid conflict due to they are in the same networking. They works well.
Today the production server's SharePoint site prompt "Cannot connect to the configuration database", but team foundation service works well, I doubt that something in the testing server cause this, and I shutdown testing server, the issue still exists.
Before I have experience for this issue, most of them are related with SQL server instance configuration like this "https://mikessharepoint.wordpress.com/2011/11/22/cannot-connect-to-the-configuration-database-error-of-central-administration/" or some authentications issue in the IIS application pool.
and here is the error event from event viewer:
"
Unknown SQL Exception 53 occurred. Additional error information from SQL Server is included below.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
"
I doubt that something (probably SQL server instance name) on production server change to testing servers by some action, but I don't know where and how.
And I doubt that the new server cause the error, the reason is I find something incorrect in wss_config database of production server, the "ServerName" filed in table TimerJobHistory, some value are new server, some value are old server. But even I update all the value to old server and restarted the production server, it does not work.
I check all things I can googled, but nothing works, is there anybody could provide any help on this, appreciate for any kindly help.
Finally, I find the root reason, there is a table named "Objects" in the "Wss_config" DB, I find the new testing server name in "Name" filed, so I update the value to old server name-->Restarted IIS and SharePoint service (not sure if required)-->Bingo!
But I still don't know why the new server cause this error, so I have not power on the new server for now. Will update if any new detection.
Thanks all for your kindly help.
We access our database that is in SQL Azure, and every so often we hit this error while trying to connect. We connect from a corporate network, using SSMS or API.
The weird part is how it always successfully and instantly connects on retrying. We retry just 1 second after and it works.
We saw that the DTU Usage % was high and scaled our server up, but that did not help. We have employed a SqlAzureRetry policy while accessing the database from our API, which seems to be helping in mitigating the issue - but the root cause is still not identified.
Has anyone employed a configuration or strategy or faced a similar issue? (the underlying provider failed to open / network path not found).
Thanks!
The solution was to change the format of the server name to use TCP:
tcp:servername.database.windows.net,1433;
Also, if you're connecting from code, you should change to the above format in your connection string.
I have a classic ASP website running on a Windows Server 2012 box. One page makes a HTTP request to another application over https using code like this:
Sub ShopXML4http(url, inStr, outStr, method, xmlerror)
Dim objhttp
Set objhttp = Server.CreateObject ("MSXML2.ServerXMLHTTP.6.0")
objHttp.open method, url, false
If Method="POST" Then
objHttp.Send instr
Else
objHttp.Send
End if
outstr=objHttp.responseText
Set objhttp=nothing
End Sub
This code works fine almost all of the time (thousands of requests per day), but sporadically it will fail with a message like this:
Number: -2147012739
Description: An error occurred in the secure channel support
Source: msxml6.dll
The application was recently moved from an old Windows 2003 Server to the 2012 Server, and this issue never seemed to be a problem on the old server. In addition, while this error is happening on the website, I could run the exact same code in a VBScript and it works fine. Resetting the application pool seems to cause the site to be able to do the secure HTTP requests again (although it often fixes itself before I can get to the server).
I have had the exact same problem after migrating from 2003 to 2008 R2 and found the solution. Change:
Set objhttp = Server.CreateObject ("MSXML2.ServerXMLHTTP.6.0")
to:
Set objhttp = Server.CreateObject ("MSXML2.XMLHTTP.6.0")
and your problem will go away.
I tried to find the pros and cons about both objects, but haven't yet found a reason to not use XMLHTTP.
I've had the same issue and tried lots of solutions offered under a variety of posts but ultimately had no success, until now. I'll detail the solution that worked for me with reference to the problem as in my case it was PayPal. I've not opened a new post as this might not be just a paypal issue in future.
The solution is a combination of a number of stackoverflow posted solutions to similar problems but this seemed the best one to add to.
The problem
Trying to test PayPal IPN on Windows Server 2008 using classic ASP using the PayPal Sandbox returns the error "An error occurred in the secure channel support".
Why it is a problem
PayPal is requiring all communications with their systems to be as secure as possible. You will need a connection that is TLS 1.2. Windows Server 2008 is not TLS 1.2 by default.
PayPal threw some confusion into the mix by saying you need a Verisign G5 certificate, which you do for the server root but not the domain you are running your code on. I also didn't install any PayPal certificates as I don't use the API. I don't believe you need your comms from an HTTPS site either - although my domain is secured using a standard GoDaddy EV cert although I did a test on a non HTTPS site after and that worked too.
My solution
First check which kind of security your server is using via SSL Labs.
It should be TLS1.2 or higher and no other TLS's or SSL's. It must also have a SHA256 encryption.
You may need to patch the server: https://support.microsoft.com/en-us/kb/3106991.
Use IISCrypto to set the correct TLS and ciphers. I used the registry changes offered up elsewhere on stackoverflow but this did not work and actually totally screwed up my server for everything using HTTPS posts, not just my development site! IISCrypto also handles the ciphers.
Make sure your application pool is v4.5, which in itself is unclear because IIS might only offer v4.0 as an option. However this is probably actually v4.5. You can verify this via https://msdn.microsoft.com/en-us/library/hh925568(v=vs.110).aspx.
Within your code you need to use Server.CreateObject ("MSXML2.XMLHTTP.6.0"), not Server.CreateObject ("MSXML2.ServerXMLHTTP.6.0") as mentioned above.
Now I've no idea why the non-server XMLHTTP works as that seems contrary to the documentation behind it. Right now, after 10 days of stress, panic and frustration I don't care! I hope this is useful for others.
Finding the solution was a nightmare so I'll add some phrases below to help others if searching:
PayPal IPN failing with server error
PayPal SSL Windows 2008 errors
An error occurred in the secure channel support
classic ASP PayPal Sandbox SSL errors
I'd like to publicly thank Rackspace and GoDaddy for their help with this. I'd like to publicly state that I found paypal have the worst technical support ever and just do not care, constantly pointing to their own docs, if they ever respond. They say they've been sending emails out about this since September 2014 but I never received one. These new requirements are active on the PayPal Sandbox but go live in September 2016. I only came across it as developing a new solution so needed the sandbox - if you're running live you won't know about the problem until it hits and then you're dead in the water. Test your entire payment system on the PayPal sandbox asap is my advice!!
None of the answers above applies to my situation. Then I hopped on the link here:
https://support.microsoft.com/en-za/help/3140245/update-to-enable-tls-1-1-and-tls-1-2-as-a-default-secure-protocols-in
This update provides support for Transport Layer Security (TLS) 1.1 and TLS 1.2 in Windows Server 2012, Windows 7 Service Pack 1 (SP1), and Windows Server 2008 R2 SP1.
Applications and services that are written by using WinHTTP for Secure Sockets Layer (SSL) connections that use the WINHTTP_OPTION_SECURE_PROTOCOLS flag can't use TLS 1.1 or TLS 1.2 protocols. This is because the definition of this flag doesn't include these applications and services.
This update adds support for DefaultSecureProtocols registry entry that allows the system administrator to specify which SSL protocols should be used when the WINHTTP_OPTION_SECURE_PROTOCOLS flag is used.
This can allow certain applications that were built to use the WinHTTP default flag to be able to leverage the newer TLS 1.2 or TLS 1.1 protocols natively without any need for updates to the application.
This is the case for some Microsoft Office applications when they open documents from a SharePoint library or a Web Folder, IP-HTTPS tunnels for DirectAccess connectivity, and other applications by using technologies such as WebClient by using WebDav, WinRM, and others.
This update will not change the behavior of applications that are manually setting the secure protocols instead of pass the default flag.
Client service on Windows 2008 R2 server outbound to server over TLS reciprocated the error in question. I thought it could be cipher suite compatibility. Wireshark trace indicated version in Client Hello request was TLS 1.0 but server requires TLS 1.2. The cipher suites sent to outbound server from client service were fine. The problem is the client service or application on Windows server default employs the system default, which is not TLS 1.2.
The solution is to add a registry subkey named DefaultSecureProtocols with a value corresponding to which TLS version(s) should be supported. Add said registry subkey, with type DWORD, to the following locations:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\WinHttp
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Internet Settings\WinHttp
For Internet Explorer fix, you can add a similar registry subkey titled SecureProtocols, also with type DWORD, to the following locations:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
Below you can find the table of values for both subkeys:
DefaultSecureProtocols Value Protocol enabled
0x00000008 Enable SSL 2.0 by default
0x00000020 Enable SSL 3.0 by default
0x00000080 Enable TLS 1.0 by default
0x00000200 Enable TLS 1.1 by default
0x00000800 Enable TLS 1.2 by default
For example:
The administrator wants to override the default values for WINHTTP_OPTION_SECURE_PROTOCOLS to specify TLS 1.1 and TLS 1.2.
Take the value for TLS 1.1 (0x00000200) and the value for TLS 1.2 (0x00000800) then add them together in calculator (in programmer mode), the resulting registry value would be 0x00000A00.
I applied 0x00000A00 as the value for both subkeys and it successfully resolved the issue.
There is also an Easy Fix (link is here: https://aka.ms/easyfix51044) available from Microsoft, if you don't wish to manually enter registry subkeys and values.
It's all valid however the 'critical' missing bit for TLS1.2 support on Windows 7 with IIS7.5 and classic asp is setting this in the registry:-
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings\WinHttp]
"DefaultSecureProtocols"=dword:00000800
I hope that saves you a day of faffing, rebooting and head scratching! :)
This code snippet is useful for testing. https://www.howsmyssl.com/
<%
Set winhttp = Server.CreateObject("WinHTTP.WinHTTPRequest.5.1")
winhttp.open "GET", "https://howsmyssl.com/a/check", False
winhttp.Send
Response.Write winhttp.responseText
%>
In a Windows Server 2016 Classic ASP script, fetching an HTTPS URL from Windows Server 2012 R2, I recently had to remove SSL 2.0 from SecureProtocols in order to stop this secure channel error -2147012739.
' Use the latest client
Set httpClient = Server.CreateObject("WinHttp.WinHttpRequest.5.1")
' allow only TLS 1.2 or TLS 1.1
Const WHR_SecureProtocols = 9
httpClient.Option(WHR_SecureProtocols) = &h0800 + &h0200
' Other values: TLS 1.0 &h0080, SSL 3.0 &h0020, SSL 2.0 &h0008
' NB Including SSL 2.0 stops https to Windows Server 2012 R2 working
' Other options you may want to set, from https://learn.microsoft.com/en-us/windows/desktop/winhttp/winhttprequestoption
' Ignore certificate errors
Const WHR_SslErrorIgnoreFlags = 4
httpClient.Option(WHR_SslErrorIgnoreFlags) = &h3300
' Don't bother checking cert, or risking failure if we can't check
Const WHR_EnableCertificateRevocationCheck = 18
httpClient.Option(WHR_EnableCertificateRevocationCheck) = False
Troubleshooting error codes:
-2147012739 is a HRESULT.
In hexadecimal that's 0x80072F7D.
Look at the LOWORD: 0x2F7D.
Convert that back to decimal: 12157.
Lookup 12157 error codes.
Find that it matches: ERROR_WINHTTP_SECURE_CHANNEL_ERROR
A bit of Google-fu finds http://msdn.microsoft.com/en-us/library/windows/desktop/aa383770(v=vs.85).aspx which states:
ERROR_WINHTTP_SECURE_CHANNEL_ERROR
12157
Indicates that an error occurred having to do with a secure channel (equivalent to error codes that begin with "SEC_E_" and "SEC_I_" listed in the "winerror.h" header file).
However, you already discovered this as the message you got was "Description: An error occurred in the secure channel support". So this leads us right back where we started.
The other observation I make is that your code is a non-asynchronous WinHTTP request (I know it has to be to function inside ASP), but, the concern is, due to the high frequency, your machine could be processing more than one WinHTTP request concurrently. I've seen some Windows deliberately throttle the total number of active concurrent WinHTTP request by blocking the late requests. For example, on a Windows 7 machine a process cannot make more than 2 concurrent requests to the same remote server. i.e. The 3rd, 4th... requests will be blocked until the first two complete.
One solution is to load balance incoming request over more than one application pool or over more servers.
We had a variation on this issues and it really cost us some time to figure it out.
Here is the situation: An older Linux server hosting an application written in PHP and provides data through webservice calls. The server is using HTTPS. Calls from various clients are made with code using the winHTTP 5.2 library. (Winhttp.dll)
Symptom: Our clients are now getting sporadic error messages when making repeated winHTTP calls using a ‘POST’ command. The messages are either ‘The buffers supplied to a function was to small.‘ or ‘An error occurred in the secure channel support ‘. After much searching we discovered that the client’s server was logging ‘Schannel Event ID 36887 alert code 20’ in the Event Viewer that corresponded with the visible error message.
Solution: We discovered that our old Linux server could not support TLS 1.2. (CentOS 5.11) We also learned that several of our clients had recently (summer 2016) applied an update to their Microsoft servers. (Server 2008, server 2012) The fix was to force their servers to use TLS 1.1 for the webservice calls. The part that is rather strange to me is that the settings in Internet Explorer for changing the TLS had no effect on the problem. However by changing a setting in Group Policies we were able to solve the problem. Our technical advisor on this matter pointed out that the change is really obscure, but that a third-party vendor has provided a quick solution. That tool is called IIS Crypto from Nartac. https://www.nartac.com/Products/IISCrypto/Download
The tool lets you specifically select Protocols.
We are now getting a new server to host our applications (CentOS 6) and then should be able to use the TLS 1.2 protocol!
I encountered this error a few months ago myself. Most often, this issue is caused by an invalid SSL cert. Considering that at the time of the post you had just migrated to a new server, you probably just need to reinstall the SSL certificate.
I realize this question is old, but hopefully someone else can benefit from my answer.
So I have an issue where I am remotely connecting to a Mongodb on my linode box, and I am not longer able to access this DB. I can from my local machine, but when I am on this remote server (where the website runs) it is not working. I am not seeing the connection come into the Mongo logs, so this leads me to believe that maybe it is being intercepted by a firewall?
How can I watch traffic and see if this connection is at least making it to my linode box? I am connecting with Mongoid, so if there is a way to prove no connection there too.
Right now the only error I get is a erb view timeout execution error - not much to go on.
Thanks,
Daniel