I have something funky going on with MOSS & was wondering if anyone out there has seen anything like it:
I have a document library in MOSS that has several custom columns added to it. I have a column of type choice. For one document in the library (a word document), the selected value does not get displayed for the one column - all of the other columns are fine & the other 60 documents in the folder display the selected values correctly. When I edit the properties of the document, the value of the column is defaulted to blank, I can change it to another value & save it. However the new value doesn't get displayed in the list view, nor does it show up if I edit the properties again.
If, I open the document in word & view the Document Information Panel it displayes the value that I had selected & saved for the column. However, the column is being displayed as a text box & not a drop down. The value still does not get displayed in the list view or properties view after a save.
Has anyone seen behaviour like this before?
My first guess is a name collision between your custom column and the columns that ship with SharePoint out of the box. What is the column name that is causing the problem?
I have seen situations like this when there are documents in a library, and then columns are added. The existing information does not get updated properly.
If you reupload the document as a second content, does this happends again ?
If yes, you may check advanced properties of the document before uploadind it. There may be some data in it that SharePoint try to use when importing the file. It may explain that you don't have the issue when you copy/paste only the content.
Along a similar line, it could be that the problem doc has a Word metadata field named subject, and MOSS is doing its property promotion thing to mess up your field. If so, clearing the Word metadata might fix it.
Related
I have an issue with a lotus notes view. This view displays entries based on the number of problems in the field "All problems". This field is a multivalued field. In the view column properties for the column "problem", the multivalue separator is New line & under the sorting tab, the checkbox against "show multiple values as separate entries" is checked. When i see the view from my machine, multiple values appear as a separate entry. When i checked in another machine, the view was displayed as expected. The problem came, when i tried to do a search for documents based on a value. Now the multiple values come as a single entry which is not supposed to happen. The strange thing is it appears fine in my machine. But when i tried it in another machine, i face the issue. To make sure its not a version problem i checked it in a machine with the same version as mine(8.5.3) also tried in a lower version(7.5) but got the same result. I even tried the following: 1.delete the cache.ndk. 2. remove the DB icon from workspace and reopen the database from applications. 3. go to (Byurl) view in bookmark.nsf and delete all the documents and reopen lotus notes. 4.rebuild views using Ctrl+Shift+F9. Could not do a database rebuild(no access). Does any one know what can be the problem and possible resolutions?
The search is returning a single document, which is correct. It's the representation of the document that is annoying you, you want to have it displayed as it was originally, i.e. with a categorized column. If you are sorting another column in the view, the categorized column gets turned off.
Have a look in Search in View/More/Sort Results by, that might be your problem.
In short:
I'm trying to filter an XSLTListViewWebPart based on what is selected in another XSLTListViewWebPart. Using a String field as connection this is working fine. Using a hyperlink field no data is displayed.
In more detail:
I have two lists, say Accounts and Projects. Both have a hyperlink field accountURL.
All accounts have different accountURLs. Different projects can have the same value for accountURL. Both are displayed on a page using the XSLTListViewWebPart.
The simple goal is to filter the Projects list based on which item is selected in the Accounts list using the accountURL field. So I established a web part connection using the acountURL as a filter. Alas, when an item in the Accounts list is selected no items are showwn in the Projects list although I double checked that there are matching values.
When using a string field instead of a hyperlink field for accountURL everything works like a charm. Problem is, I need the hyperlink field.
Is this desired behaviour? Do you have any suggestions for a workaround?
(I already tried converting the hyperlink field to a string field via a calculated column which did not work out either.)
All was and is to be done in the web interface or SP-Designer. Coding a WSP is not an option for this problem. As I'm not quite familiar with the correct terminus technicus I use field and column interchangeably.
All help is greatly appreciated.
Ben
Someone on the Microsoft forum suggested the following workaround which does its job well:
Add a hidden text column to both lists.
Use a workflow which is triggered on item creation and update to copy the value of the hyperlink column to the hidden text column.
Connect both webparts using the hidden column as filter.
Nonetheless, I still wonder whether it is possible to use hyperlink columns or other special columns for filtering. I also had the problem that I cannot use a person column as lookup.
Does anyone know if whether there ist some kind of overview
which column types can be used for filtering/formulas/lookup/...?
Cheers,
Ben
I am retrieving a list of values from a sharepoint list, which works well but my problem is that it only retrieves the first 100 records. there are currently 500 records that should be available.
Scenario: I have two comboboxes on an infopath form:
A List of Locations
A list of areas within the locations
the list of locations will filter the list of areas but as infopath seems to only retrieve the first 100 records so most of the locations do not show any areas as there is nothing to filter.
By design, the query will only return the first page of results from the default view for the list. Change the item limit for the default view in SharePoint, and you'll change the returned values for InfoPath.
EDIT (links from my comments, here for greater readability):
Here are sources describing this fix in MSDN forum (scroll to the bottom), a blog comment that describes the SharePoint setting step-by-step, one with a screen cap of the somewhat counter-intuitive interface, and another describing performance implications on the server side.
Hope this helps.
Just documenting what I have discovered trying to resolve the problem. I have not been able to change the default view as yet as I dont have the permission to. That should change though.
One possible workaround I have found is that you can export the list to Excel which contains all the data that I was looking for. the file that sharepoint produces is an Excel Query file like "export.iqy". You can save and open the file in notepad. which will look something like the following
WEB
1
http://SharepointSite/_vti_bin/owssvr.dll?XMLDATA=1&List={14C4ED2B-3050-4C47-B5F3-6333C3B0FB28}&View={8E6124E0-23F2-4BA2-86E7-96E7F36BAEC8}&RowLimit=0&RootFolder=%2fLists%2fSharepoint%20Sites
Selection={14C4ED2B-3050-4C47-B5F3-6333C3B0FB28}-{8E6124E0-23F2-4BA2-86E7-96E7F36BAEC8}
EditWebPage=
Formatting=None
PreFormattedTextToColumns=True
ConsecutiveDelimitersAsOne=True
SingleBlockTextImport=False
DisableDateRecognition=False
DisableRedirections=False
SharePointApplication=http://SharepointSite/_vti_bin
SharePointListView={8E6124E0-23F2-4BA2-86E7-96E7F36BAEC8}
SharePointListName={14C4ED2B-3050-4C47-B5F3-6333C3B0FB28}
RootFolder=/Lists/My list
You can take the third line which is -
http://SharepointSite/_vti_bin/owssvr.dll?XMLDATA=1&List={14C4ED2B-3050-4C47-B5F3-6333C3B0FB28}&View={8E6124E0-23F2-4BA2-86E7-96E7F36BAEC8}&RowLimit=0&RootFolder=%2fLists%2fSharepoint%20Sites
And use that to retrieve the complete list. I added an new receive data connection, selected an xml document and added the above URL.
It is not formated particullary nice but it will return all the data that I was expecting.
I think that Argalatyr solution is much simpler at this point, but it depends on if i am able to get the default view changed.
there is yet one workaround of this without such hardcoding. If you open Query editor, then you have there available ribbon with menu items. Open "Home" -> "Select top rows" and enter there some realy high number (I have in my list 596 rows, so I entered there as limit of top rows 20000 and I got whole list).
Sorry, I don't have available English version of Excel, so I cannot add screenshots.
enter image description here
Hey guys, just wondering if their is a simple way to create an Item in a custom list but i need that item to be dynamic. The user can click add more to get another field that would hold the same type of data an unlimited amount of time.
If i could even just add an excel spreadsheet type of field that would work also. But excel wouldnt need to be a requirement on the users machine.
I thought i had read somewhere you could do this using info path but i cant seem to find anything relating to it on google.
The InfoPath feature is called a "repeating section". There is information on how to set that up in Office Online.
If you wanted to achieve this entirely in SharePoint, the problem is that there can only be a fixed number of fields in a list. So you could create as many that would ever be used and just display all of those. Or to make it much nicer for the user incorporate jQuery to hide all of the fields except the first one and provide a button for them to click that unhides the next one.
There is good information on how to access list form fields using jQuery in the question How can I set the default value in a SharePoint list field, based on the value in another field?
I have a Person field in my custom list. I want to have a view that will show multiple fields from that Person instead of the one I had to choose when creating the Person column.
So basically I want to have one column for Person and then in the view see Name, title, email, phone. All of those are valid choices but I can only pick one right now.
I really want to avoid typing in the username lookup for each column I choose to display.
This is SP 2007
It sounds like you need to create a custom fieldtype (with a fieldcontrol) that inherits from the userfield but in viewmode renders out the different columns you need. Is that something along the lines you are looking for?
http://www.sharepointblogs.com/nicksevens/archive/2007/08/31/create-custom-field-types-for-sharepoint.aspx
Note: This link is broken
You probably want a Computed Field. Note that this is not a Calculated Column. A Computed Field is what is used to display the same data is different ways. In SharePoint there is a Title field, but there is also a "Title (linked to item with edit menu)" computed field as well as a "Title (linked to item)" computed field.
See midway down this link for more details. I'm not sure if it will have all of the power that you need, but if it does it is almost certainly what you are looking for if you don't mind getting into the Schema XML file a little.
Could you use a DataView web part for this? If it's just a question of viewing the data that might be suitable.
Came across this thread and thought I'd add a tip. This suggestion is clearly not for every use case, but may work well in situations where you're managing a list rather than allowing manual inputs (verified to work with SP 2013):
Create a spreadsheet with columns to match your SharePoint list that contains multiple profile fields. (for example: name, phone number, email address)
In the spreadsheet, enter the same email address in all of the person/group field types in that row. (e.g., boss#company.com, boss#company.com, boss#company.com)
Select and copy the row(s) you wish to transfer to SharePoint.
In SharePoint, change the list view to "Quick Edit" and paste the row(s) into the grid.
SharePoint will process each field and convert the email address to the profile value you selected during the list setup.