I know how to generally move around in command mode, specifically, jumping to lines, etc. But what is the command to jump to the end of the line that I am currently on?
Just the $ (dollar sign) key. You can use A to move to the end of the line and switch to editing mode (Append). To jump to the last non-blank character, you can press g then _ keys.
The opposite of A is I (Insert mode at beginning of line), as an aside. Pressing just the ^ will place your cursor at the first non-white-space character of the line.
As lots of people have said:
$ gets you to the end of the line
but also:
^ or _ gets you to the first non-whitespace character in the line, and
0 (zero) gets you to the beginning of the line incl. whitespace
$ moves to the last character on the line.
g _ goes to the last non-whitespace character.
g $ goes to the end of the screen line (when a buffer line is wrapped across multiple screen lines)
The main question - end of line
$ goes to the end of line, remains in command mode
A goes to the end of line, switches to insert mode
Conversely - start of line (technically the first non-whitespace character)
^ goes to the start of line, remains in command mode
I (uppercase i) goes to the start of line, switches to insert mode
Further - start of line (technically the first column irrespective of whitespace)
0 (zero) goes to the start of line, remains in command mode
0i (zero followed by lowercase i) goes the start of line, switches to insert mode
For those starting to learn vi, here is a good introduction to vi by listing side by side vi commands to typical Windows GUI Editor cursor movement and shortcut keys.
vi editor for Windows users
If your current line wraps around the visible screen onto the next line, you can use g$ to get to the end of the screen line.
I can't see hotkey for macbook for use vim in standard terminal. Hope it will help someone.
For macOS users (tested on macbook pro 2018):
fn + ← - move to beginning line
fn + → - move to end line
fn + ↑ - move page up
fn + ↓ - move page down
fn + g - move the cursor to the beginning of the document
fn + shift + g - move the cursor to the end of the document
For the last two commands sometime needs to tap twice.
The dollar sign: $
Press A to enter edit mode starting at the end of the line.
The advantage of the 'End' key is it works in both normal and insert modes.
'$' works in normal/command mode only but it also works in the classic vi editor (good to know when vim is not available).
Also note the distinction between line (or perhaps physical line) and screen line. A line is terminated by the End Of Line character ("\n"). A screen line is whatever happens to be shown as one row of characters in your terminal or in your screen. The two come apart if you have physical lines longer than the screen width, which is very common when writing emails and such.
The distinction shows up in the end-of-line commands as well.
$ and 0 move to the end or beginning of the physical line or paragraph, respectively:
g$ and g0 move to the end or beginning of the screen line or paragraph, respectively.
If you always prefer the latter behavior, you can remap the keys like this:
:noremap 0 g0
:noremap $ g$
In many cases, when we are inside a string we are enclosed by a double quote, or while writing a statement we don't want to press escape and go to end of that line with arrow key and press the semicolon(;) just to end the line. Write the following line inside your vimrc file:
imap <C-l> <Esc>$a
What does the line say? It maps Ctrl+l to a series of commands. It is equivalent to you pressing Esc (command mode), $ (end of line), a (append) at once.
Or there's the obvious answer: use the End key to go to the end of the line.
Possibly unrelated, but if you want to start a new line after the current line, you can use o anywhere in the line.
The easiest option would be to key in $. If you are working with blocks of text, you might appreciate the command { and } in order to move a paragraph back and forward, respectively.
I was used to Home/End getting me to the start and end of lines in Insert mode (from use in Windows and I think Linux), which Mac doesn't support. This is particularly annoying because when I'm using vim on a remote system, I also can't easily do it. After some painful trial and error, I came up with these .vimrc lines which do the same thing, but bound to Ctrl-A for the start of the line and Ctrl-D for the end of the line. (For some reason, Ctrl-E I guess is reserved or at least I couldn't figure a way to bind it.) Enjoy.
:imap <Char-1> <Char-15>:normal 0<Char-13>
:imap <Char-4> <Char-15>:normal $<Char-13>
There's a good chart here for the ASCII control character codes here for others as well:
http://www.physics.udel.edu/~watson/scen103/ascii.html
You can also do Ctrl-V + Ctrl- as well, but that doesn't paste as well to places like this.
Related
I regularly use the . key to repeat my last vim command. I'm wondering if there's a way to use it with commands performed using markers. Here's a simple example:
Mark a line of text using m'a
Move down a few lines, e.g. 5j
Indent the lines using >'a -- indents 6 lines
Press . to repeat above command on the same 6 lines -- will only affect 1st line
Is there a way to get vim to apply the same marker range of the previous command when using the . command?
ps. I know the above example would have been easier with 6>>, which works with the ., I'm just using it as an example. I often use markers for more complex/longer commands.
The problem is that the command you're repeating is >'a, but because of the rule "After applying the operator the cursor is mostly left at the start of the text that was operated upon" (from :help operator), >'a leaves the cursor at mark a if that was above your starting position. Then when you repeat >'a you end up with a linewise motion from that line to itself, which only re-indents one line.
Since you're left at the beginning of the block of text, to affect the same block of text again you can use the '] (linewise) or `] (charwise) motions, which move to the end of the block of text just affected. So you can use >'] to indent the same block again, and since your cursor starts and ends at the same position this time, you can repeat it additional times with ..
A simpler choice, though, would be to just use V5j> instead of ma5j>'a. V starts visual mode (linewise) at your current position, 5j moves down 5 lines, and then > indents. And when you repeat using ., the same visual selection still pertains, so you get the desired result whether you moved up or down.
I have the following Ruby code:
if some_cond && another
foo_bar
end
and I want to change it to:
foo_bar if some_cond && another
What are the most idiomatic ways to do that in Vim?
Assuming that the cursor is located at the if-line prior to
refactoring (not necessarily at the beginning of that line),
I would use the following sequence of Normal-mode commands:
ddjVpkJ<<
or this chain of Ex commands:
:m+|-j|<|+d
Here the if-line is first moved down one line by the :move + command.
The :move command cuts a given range of lines (the current line, if
not specified) and pastes it below the line addressed by the argument.
The + address is a shorthand for .+1 referring to the next line
(see :help {address}).
Second, the line containing the body of the conditional statement is
joined with the just moved if-line. The :join command concatenates
a given range of lines into a single line. The - range is a shortened
form of the .-1 address referring to the line just above the cursor
(see :help {address}).
Third, the newly joined line is unindented by one shiftwidth using
the :< command.
Finally, the remaining end-line, which can now be addressed as +,
is removed by the :delete command.
I see few (probably non-optimal) solutions:
cursor in first character in first line:
D - remove if condition but leave cursor in same position (don't delete line)
J - join next line to current
A <Space> <ESC> - append space and exit to Normal mode
p - paste if condition
and then remove remaining end with jdd
cursor in first character in first line, as previously:
j - move to next line
dd - remove this line
k - move back to if condition
P - paste removed line before actual line, cursor should be placed to pasted line
J - join next line to current
== or << - unindent current line
and then remove remaining end with jdd
another solution:
j - move to second line
JD - join line with next, remove what was joined
dd - remove current line
k - step to previous line
PJ<< - paste, join and unshift
It's probably not optimal, but I do it without thinking, because most of this commands are in my muscle memory (you don't think how to move around you, how to yank/delete and paste most of the time, and joining line is also helpful to remember).
If you have virtualedit enabled in config, instead of A <Space> <Esc> you can $ <Space>, but I find $ harder to use than A followed by Ctrl-[ (it's simmilar to ESC).
As an advice: if you use some upper letter commands, try to chain them if it's possible, so you only need to keep Shift pressed and then execute some commands, instead of mixing upper and lower letter commands and pressing two keys at a time (upper letter is 2 key press, one is Shift). Once I found combo helpful for restarting server in console Ctrl+cpj, which sends Ctrl+c, Ctrl+p (previous command) and Ctrl+j (Enter key) with single Ctrl press. Since then I try to find simmilar time-saving combination in Vim too mostly with Shift, as Ctrl is not much used in Vim.
Yet another way:
ddpkJjdd
ddp swap the two lines
kJ move up and join the lines
== re-indent the line
jdd move down and delete the last line
There are probably 30 ways to do this.
Here is one, assuming you are starting from the end of the word end in normal mode:
dd (delete last line)
"aD (delete and copy foo_bar to buffer a)
dd (delete now-empty line 2)
"aP (paste from buffer a before caret)
aSpaceEsc (insert space and return to normal mode)
Again, "properly" rarely applies in Vim because there are so many ways to accomplish something. This is so small a change that even re-typing foo_bar could be justifiable.
In vim I filter, say the current single line, using !! through a Unix command. To achieve this I defined the following shortcut in .vimrc
:map <Enter> !!mycommand<CR>:,+1<CR>
Pressing <Enter> this takes me to the line below the current if mycommand replaces my single input line be exactly one output line. If the output has more lines (number of lines unknown before command execution) it will still take me to the line below the current.
Now, I would like to know how I can always get to the first line below the inserted output of mycommand.
The modified shortcut would then allow me to 'execute' the text file line by line using just <Enter> displaying the output each time.
If there is no way to do this without any previous knowledge of the output of mycommand, maybe there is one knowing say the first character of each output line.
Thanks a lot!
You can use the special marks '[ and '], which mark the start and end of the last changed (or yanked) text. Change your map to:
:map <Enter> !!mycommand<CR>']+
Note that I'm using + in place of your ex command. This will jump to the first non-blank character in next line. If that's not what you want, you may try simply j or, use a shorter version of your original map:
:map <Enter> !!mycommand<CR>']:+1<CR>
You don't really need the comma, to make this a range. This command is just a simplified :#, where # is a line number to jump. Here you can use . meaning "current line", and then :.+1 moves to the next line. But you can omit the dot, and that's why :+1 does the same.
I'm hand-editing CNC Gcode text files and need a way to reference locations in the file and on the toolpath.
I want to modify every line in the text file so that it begins with the the upper case letter N followed by the line number, incremented in tens for each successive line, then a whitespace followed by the original text on that line. How can I do this in Vim?
I'm not sure about vi, but (since you're using the vim tag) Vim allows you to accomplish your task as follows:
Adjust the first line by hand (insert a N10 at the beginning of the line), then put the cursor at the beginning of the next line.
Press qb to start recording a macro (the b names the register used to store the macro; feel free to use a different letter -- and definitely do use a different letter if you've got something useful stashed away in b).
Move the cursor upward to the beginning of the previous line (which you have adjusted by hand). Press v to start visual selection mode, then f to move the cursor to the next space on the line (if you use a single space as your whitespace separator, that is; adjust this step if you're using a tab or multiple spaces).
Press y to yank the selected text. This will also remove the visual selection.
Move the cursor to the beginning of the next line. Press P to insert the previously yanked text before the cursor, that is, on the very beginning of the line.
Move the cursor to the numeric part of the line header. Press 10 C-a (1, 0, control + A) to increment that number by 10.
Move the cursor to the beginning of the next line. Press q to stop recording the macro.
Press 10000000 #b to execute the macro 10000000 times or until it hits the end of the file. This should be enough to take care of all the lines in your file, unless it is really huge, in which case use a bigger number.
...or use Vim to write a simple script to do the job in whichever language you like best, then run it from a terminal (or from withing Vim with something like :!./your-script-name). ;-)
The following command will prepend ‘N<line number * 10>’ to every line:
:g/^/exe 'normal! 0iN' . (line('.')*10) . ' '
You can do it easily in Vim with this:
:%s/^/\=line(".")*10 . " "/
This replaces the start of every line with the result of an expression that gives the line number times ten, followed by a space.
I have not timed it, but I suspect it might be noticeably faster than the other Vim solutions.
Cheating answer:
:%!awk '{print "N" NR "0", $0}'
There are two ways to implement that without resorting to external
tools: via a macro or by using Vimscript. In my opinion, the first way
is a little cumbersome (and probably not as effective as the solution
listed below).
The second way can be implemented like this (put the code into your
.vimrc or source it some other way):
function! NumberLines(format) range
let lfmt = (empty(a:format) ? 'N%04d' : a:format[0]) . ' %s'
for lnum in range(a:firstline, a:lastline)
call setline(lnum, printf(lfmt, lnum, getline(lnum)))
endfor
endfunction
The NumberLines function enumerates all lines of the file in a given
range and prepends to each line its number according to the provided
printf-format (N%04d, by default).
To simplify the usage of this function, it is convenient to create
a command that accepting a range of lines to process (the whole file,
by default) and a optional argument for the line number format:
command! -range=% -nargs=? NumberLines <line1>,<line2>call NumberLines([<f-args>])
Selecting a large amount of text that extends over many screens in an IDE like Eclipse is fairly easy since you can use the mouse, but what is the best way to e.g. select and delete multiscreen blocks of text or write e.g. three large methods out to another file and then delete them for testing purposes in Vim when using it via putty/ssh where you cannot use the mouse?
I can easily yank-to-the-end-of-line or yank-to-the-end-of-code-block but if the text extends over many screens, or has lots of blank lines in it, I feel like my hands are tied in Vim. Any solutions?
And a related question: is there a way to somehow select 40 lines, and then comment them all out (with "#" or "//"), as is common in most IDEs?
Well, first of all, you can set vim to work with the mouse, which would allow you to select text just like you would in Eclipse.
You can also use the Visual selection - v, by default. Once selected, you can yank, cut, etc.
As far as commenting out the block, I usually select it with VISUAL, then do
:'<,'>s/^/# /
Replacing the beginning of each line with a #. (The '< and '> markers are the beginning and and of the visual selection.
Use markers.
Go to the top of the text block you want to delete and enter
ma
anywhere on that line. No need for the colon.
Then go to the end of the block and enter the following:
:'a,.d
Entering ma has set marker a for the character under the cursor.
The command you have entered after moving to the bottom of the text block says "from the line containing the character described by marker a ('a) to the current line (.) delete."
This sort of thing can be used for other things as well.
:'a,.ya b - yank from 'a to current line and put in buffer 'b'
:'a,.ya B - yank from 'a to current line and append to buffer 'b'
:'a,.s/^/#/ - from 'a to current line, substitute '#' for line begin
(i.e. comment out in Perl)
:'s,.s#^#//# - from 'a to current line, substitute '//' for line begin
(i.e. comment out in C++)
N.B. 'a (apostrophe-a) refers to the line containing the character marked by a. ``a(backtick-a) refers to the character marked bya`.
To insert comments select the beginning characters of the lines using CTRL-v (blockwise-visual, not 'v' character wise-visual or 'V' linewise-visual). Then go to insert-mode using 'I', enter your comment-character(s) on the first line (for example '#') and finally escape to normal mode using 'Esc'. Voila!
To remove the comments use blockwise-visual to select the comments and just delete them using 'x'.
Use the visual block command v (or V for whole lines and C-V for rectangular blocks). While in visual block mode, you can use any motion commands including search; I use } frequently to skip to the next blank line. Once the block is marked, you can :w it to a file, delete, yank, or whatever. If you execute a command and the visual block goes away, re-select the same block with gv. See :help visual-change for more.
I think there are language-specific scripts that come with vim that do things like comment out blocks of code in a way that fits your language of choice.
Press V (uppercase V) and then press 40j to select 40 lines and then press d to delete them. Or as #zigdon replied, you can comment them out.
The visual mode is the solution for your main problem. As to commenting out sections of code, there are many plugins for that on vim.org, I am using tComment.vim at the moment.
There is also a neat way to comment out a block without a plugin. Lets say you work in python and # is the comment character. Make a visual block selection of the column you want the hash sign to be in, and type I#ESCAPE. To enter a visual block mode press C-q on windows or C-v on linux.
My block comment technique:
Ctrl+V to start blockwise visual mode.
Make your selection.
With the selection still active, Shift+I. This put you into column insert mode.
Type you comment characters '#' or '//' or whatever.
ESC.
Or you may want to give this script a try...
http://www.vim.org/scripts/script.php?script_id=23
For commenting out lines, I would suggest one of these plugins:
EnhancedCommentify
NERD Commenter
I find myself using NERD more these days, but I've used EnhancedCommentify for years.
If you want to perform an action on a range of lines, and you know the line numbers, you can put the range on the command line. For instance, to delete lines 20 through 200 you can do:
:20,200d
To move lines 20 through 200 to where line 300 is you can use:
:20,200m300
And so on.
Use Shift+V to go in visual mode, then you can select lines and delete / change them.
My usual method for commenting out 40 lines would be to put the cursor on the first line and enter the command:
:.,+40s/^/# /
(For here thru 40 lines forward, substitute start-of-line with hash, space)
Seems a bit longer than some other methods suggested, but I like to do things with the keyboard instead of the mouse.
First answer is currently not quite right?
To comment out selection press ':' and type command
:'<,'>s/^/# /g
('<, '> - will be there automatically)
You should be aware of the normal mode command [count]CTRL-D.
It optionally changes the 'scroll' option from 10 to [count], and then scrolls down that many lines. Pressing CTRL-D again will scroll down that same lines again.
So try entering
V "visual line selection mode
30 "optionally set scroll value to 30
CTRL-D "jump down a screen, repeated as necessary
y " yank your selection
CTRL-U works the same way but scrolls up.
v enters visual block mode, where you can select as if with shift in most common editors, later you can do anything you can normally do with normal commands (substitution :'<,'>s/^/#/ to prepend with a comment, for instance) where '<,'> means the selected visual block instead of all the text.
marks would be the simplest mb where u want to begin and me where u want to end once this is done you can do pretty much anything you want
:'b,'ed
deletes from marker b to marker e
commenting out 40 lines you can do in the visual mode
V40j:s/^/#/
will comment out 40 lines from where u start the sequence