I am trying to create a powerapps web part that will open a specific screen from a canvas app using parameters. I have added the web part and added the power apps web link to it. When I enter ¶metername=parameter nothing shows up. I can enter the web link and parameters directly into a browser window (tried in Chrome and Edge) and the app will display properly. I can also created a button in a web part and added the link to it and it will also display the app when the button is clicked. The app is working properly with no errors, it will just not show up in the web part when the parameters are added to the link (If no parameters are added to the link, everything will display fine).
I am trying to create a powerapps web part that will open a specific screen from a canvas app using parameters. I have added the web part and added the power apps web link to it. When I enter ¶metername=parameter nothing shows up. I can enter the web link and parameters directly into a browser window (tried in Chrome and Edge) and the app will display properly. I can also created a button in a web part and added the link to it and it will also display the app when the button is clicked. The app is working properly with no errors, it will just not show up in the web part when the parameters are added to the link (If no parameters are added to the link, everything will display fine).
I was struggling with this myself; just figured it out.
You need to put the full URL with parameters in to the "App web link or ID" property for the PowerApp web part. Be careful because the first parameter needs to be prepended with ? not &. The ampersand is used for additional, following parameters after the first parameter.
Note that I have omitted my TLD from this screenshot, however you will want to substitute your own here.
The example URL syntax given by Microsoft is https://apps.powerapps.com/play/{App ID}?{Query}. For me that URL looks something like this:
https://apps.powerapps.com/play/f813580f-3182-90b0-b3a9-781cfb288808?linkId=checkIn
I have one URL for checkIn and another for checkOut that I can use to display different forms.
My primary mistake was that I was only pasting my appID into the "App web link or ID" field rather than the entire URL. Remember, you can edit your Canvas Form, click on "Share" and get the Web Link from this page. This contains the full URL, minus your custom parameters. Play around with the full URL plus parameters until you get something that the web part will accept.
Related
I will try to make this as short as possible. I am making a Chrome extension and I wanted to have an integrated settings tab so users can customize their experience. Now, I want this settings tab to be somewhat of an "extension" to an existing settings tab in a website. Let me explain.
The website I am talking about is Roblox.com, a popular gaming platform. When logged in, you have the ability to visit your settings, which look something like this:
Now, in order to navigate the different setting "tabs," you simply click on a button and it takes you to another change. The URL corresponding to each page is https://www.roblox.com/my/account#!/TAB_NAME, with TAB_NAME being the name of the tab. What I want to do is make my own "tab" where once the player clicks, it will bring them to a settings tab where they can tweak the extension's settings. This would look something like this:
I am fully aware on how to this (inject a button into the list and customize said button), but what I don't know what to do is make it so that once the button is clicked, it will not redirect you to another website, but will simply "switch tabs" like it would with any other setting. There is an extension that already does that called "Roblox+", where it adds a button to the list, and once clicked, it takes you to a similar-looking page with the URL https://www.roblox.com/my/account?tab=rplus#!/info. From my understanding, since the tab name isn't a header, the URL does not change, which allows for a custom webpage. Now, if you were to paste that URL in a browser without the extension, then it would simply redirect you to the "Account Info" tab (although the URL remains). Here is how the Roblox+ extension settings page looks like:
Now, from what I can assume, what happens is that right after the normal account information page is loaded, it removes all the HTML elements that are related to the account information tab and re-creates the entire page using custom HTML elements. That is something similar to what I want to do. Regardless of this, I do have one question. Is it possible to somehow "overwrite" a certain domain so that, let's say, the URL https://www.roblox.com/my/account#!/my_plugin_settings led to my custom page (even if that means that the page is made from an HTML file) instead of where it was supposed to lead? If that isn't possible, would it be better to create a custom settings page outside of the Roblox website or somehow inject my own into the current settings?
This is the question that I have. Hopefully I explained it well. If someone could assist me on this, then that would be amazing. Thank you for your time and help, I truly appreciate it.
SharePoint Online: Until yesterday, I was able to use the standard Embed web part to display an iFrame to my SSRS Report server that included the control settings in the URL to hide toolbar, etc.
Like this:
<iframe src="https://reports.mydomain.com/ReportServer?/Reports/WallChart_GP&rs:Command=Render&rc:Toolbar=false&rs:ClearSession=true" height="400" width="300"></iframe>
Today, that is suddenly resulting in "Reporting Server Error: The operation you are attempting on item '/' is not allowed for this item type. (rsWrongItemType)". However if I put the URL directly into a browser I get the correct result... report with no toolbar.
When I switch the SharePoint page to edit mode and look at the Embed web part, I see that it's changing my & to & plus "amp;" for HTML formatting. If I paste that modified string into a separate browser I do still reach the report but the server ignores at least some of my commands in that I then see the report server toolbar despite setting it to false. So I don't know if it's always changed my URL like that, or if that is indeed the source of my problem. But I had not even re-published my pages in SharePoint.
If I put an embed string in the SharePoint web part that does not attempt these report server commands, I do get the report as desired. For example this displays my report in the SharePoint web part (but with the toolbar that I'm trying to avoid showing):
<iframe src="https://reports.mydomain.com/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fWallChart_GP" height="400" width="300"></iframe>
The thing that has me bring this here is the fact that it was working up until yesterday. Nothing was changed on either end. I suppose Microsoft Support may be the correct avenue but I'm concerned that I will just be told that I can't do it without regard to the fact that it worked all along.
Any insight into why this is now different or what I can do to resolve the problem?
When attempting to the load the default SSO SignIn page in Azure, the Email Address element is selected by default and in focus as follows;
When the page is zoomed the Email Address input is rendered at the top of the page on load, this causes tablets and smaller devices to be presented with a page that is already scrolled.
I have attempted to add a new input on a custom page and given it a tabindex of 0 (as a hack) as the default for all element contained inside the "api" div is 1.
I have also given the input element the autofocus attribute but it seems to strip both on render.
https://www.realmadrid.com/en/login is using a similar SignIn page and appear to have this function turned off, having gone through all the source that I could find it isn't directly apparent how they are achieving this.
Obviously this would be easy if it were possible to use JavaScript on custom pages in Azure B2C SSO but as this is not yet possible, does anyone know of a possible workaround or fix for this issue?
Update:
It's a little hard to illustrate using a screenshot, but if you select 'run now' on a new default 'SIGN-UP OR SIGN-IN POLICY' policy, set responsive as per screenshot, scroll to the top of the page and press F5, you'll be able to see the stated behavior.
We are using heavily custom policies, I'm aware of how to do this, I'm using a default example for ease of replication.
This is no longer an issue due to MS allowing front end JS https://learn.microsoft.com/en-us/azure/active-directory-b2c/javascript-samples
Reply from : https://github.com/google/physical-web/issues/595
For example, I am transmitting www.starbucks.com
http://www.starbucks.com as the URL.
My phone looks for physical web pages and say it detects www.starbucks.com
and shows it to me in my physical web present in my chrome.
As a user, this is how it will appear to me presently
» Now this does not convey much information to me.
» The text "Order while you wait" has been taken from the metadata
description of the page( as far as I know) and the title "Starbucks" *has
been taken from the *title tag.
Now, say if I can custom define these parameters, for example like this
Here, I custom defined the text of the same starbucks URL that my phone's
physical web scanned for.
This adds for relevancy to the URL. A user gets a clear message. Also, it
allows the stores to convey an effective contextual message.
This is possible when you use ReactJS and JSX?, because only you have one HTML file and always show the title default that is in this html, even if you change it with document.title = "other title" in the notification show the first and not the new title
The text shown in the Physical Web notification is strictly given by the target website and you can influence it only there.
The Chrome is actually not analyzing the target website. Its a Google server (Physical Web Service) that analysis it and this one provides information to Chrome. You seem to need changing the title instantly and often. So be careful about caching of already resolved webs on the server.
The website analysis does not execute any Javascript. It takes only what is written in HTML directly. So the trick with document.title wont work.
But there is a different way how to get the notifications. Look at the Google Nearby Notifications. In summary this works based on Eddystone-UID. You register your UID with the service and configure to redirect to target website. But in the configuration you can specify the title and description. Look at the mentioned page for the details.
The usual procedure for creating an announcement page isn't working. I go to create page, and get the usual page asking me to enter a name for my page and select a template. The problem is that the drop down box to select the template for the page does not include 'announcement page'.
What's going on? Is this a result of using a sample site template? If it is a problem with this particular site template, is there a fix?
The option is present on my other sites.