I have the below code where in all other columns there is many populated rows, what I need this formula to do in column F is to find the first blank, then place the formula in it and fill it down to the last row.
What is currently happening is I have the range as F26 as this is usually first blank but this could change and I want the code to identify this and also have the formula dynamically know what row it is on, so for example if one month the first blank was in cell F30 the range would find it and the formula would start as E30*G30.
Any help would be greatly appreciated.
Private Sub calc()
Dim lastrow As Long
Dim rng As Range
lastrow = ThisWorkbook.Worksheets("Indiv").Cells(Rows.Count, 1).End(xlUp).Row
Set rng = Range("F26:F" & lastrow)
rng.Formula = "=Round((E26*G26),2)"
End Sub
You need to find the first free row in column F and then bulid your formula with this row:
Option Explicit
Private Sub calc()
Dim ws As Worksheet ' define worksheet
Set ws = ThisWorkbook.Worksheets("Indiv")
Dim LastRowA As Long ' find last used row in column A
LastRowA = ws.Cells(ws.Rows.Count, 1).End(xlUp).Row
Dim FirstFreeRowF As Long ' find first free row in column F (if first 2 rows have data)
FirstFreeRowF = ws.Cells(1, "F").End(xlDown).Row + 1
' fix issue if first or second row is empty
If FirstFreeRowF = ws.Rows.Count + 1 Then
If ws.Cells(1, "F").Value = vbNullString Then
FirstFreeRowF = 1
ElseIf ws.Cells(2, "F").Value = vbNullString Then
FirstFreeRowF = 2
End If
End If
' define range to add formula
Dim Rng As Range
Set Rng = ws.Range("F" & FirstFreeRowF, "F" & LastRowA)
' add formula
Rng.Formula = "=Round((E" & FirstFreeRowF & "*G" & FirstFreeRowF & "),2)"
End Sub
So this will consider F5 the first free row and fill in the formula in the selected range as seen below:
I think you should find the last used row in column F, so that you could know the next row is blank
lastrowF=sheets(sheetname).range("F" & rows.count).end(xlup).row
So the next row would be like
range("F" & lastrowF+1).formula="Round((E" & lastrowF+1 & "*G" & lastrowF+1 & ",2)"
Related
So I have what might be a simple issue. I have a worksheet where I'm just hoping to generate a row count starting with cell A4. So A4 = 1, A5 = 2 , etc. The problem is I'm not sure how to configure this with the following goal:
1 - I'm hoping the count starts with cell A4 and ends the count at the final row with data.
The code I have below only works if I manually put A4 = 1, and also populates formulas past the last row unfortunately.
Please help if this is possible.
Sub V14()
With ThisWorkbook.Worksheets("DCT")
.Cells(5, 1).Resize(.Cells(.Rows.Count, 2).End(xlUp).Row - 1).Formula = "=IF(DCT!B5="""","""",DCT!A4+1)"
End With
End Sub
Write Formula to Column Range
The Code
Sub V14()
Const wsName As String = "DCT" ' Worksheet Name
Const tgtRow As Long = 4 ' Target First Row Number
Const tgtCol As String = "A" ' Target Column String
Const critCol As String = "B" ' Criteria Column String
' Define worksheet ('ws').
Dim ws As Worksheet
Set ws = ThisWorkbook.Worksheets(wsName)
' Define Last Non-Empty Cell ('cel') in Criteria Column ('critCol').
Dim cel As Range
Set cel = ws.Cells(ws.Rows.Count, critCol).End(xlUp)
' Define Target Column Range ('rng').
Dim rng As Range
Set rng = ws.Cells(tgtRow, tgtCol).Resize(cel.Row - tgtRow + 1)
' Define Target Formula ('tgtFormula').
Dim tgtFormula As String
tgtFormula = "=IF('" & wsName & "'!" & critCol & tgtRow _
& "="""","""",MAX('" & wsName & "'!" & tgtCol _
& "$" & tgtRow - 1 & ":" & tgtCol & tgtRow - 1 & ")+1)"
' Write Target Formula to Target Range.
rng.Formula = tgtFormula
' If you just want to keep the values:
'rng.Value = rng.Value
End Sub
I think you might just need an extra IF:
Sub V14()
With ThisWorkbook.Worksheets("DCT")
.Cells(4, 1).Resize(.Cells(.Rows.Count, 2).End(xlUp).Row - 1).Formula = "=IF(DCT!B4="""","""",IF(A3="""",1,SUM(DCT!A3,1)))"
End With
End Sub
Report any question you have or bug you have encountered. If, according to your judgment, this answer (or any other) is the best solution to your problem you have the privilege to accept it (link).
Dim target As String
Dim lastrow As Long
target = "A4"
lastrow = ActiveSheet.UsedRange.Rows.count
'for example
Range(target) = "1"
Range(target).Offset(1, 0) = "2"
Range(Range(target),Range(target).Offset(1, 0)).Select
Selection.AutoFill Destination:=Range(target & ":A" & lastrow + Range(target).Row - 1), Type:=xlFillDefault
You only got to change the target cell, this does the rest.
I need to find the value of the last cell in column b of sheet1. This value will change weekly. I then want to take that value and find it in sheet2. Then I want to copy and paste all data below this found value to sheet3. I can't get past the first part with the following code:
Dim cell As Range
Dim rangefound As Integer
Dim lastRow As Long
lastRow = ActiveSheet.Range("B" & Rows.Count).End(xlUp).Row
Set cell = Range("B:B").Find("rangefound")
rangefound = lastRow = Cells(lastRow, 2).Value
I've been struggling with the syntax for a month and really don't know what I'm doing.
try this
Sub test()
Dim cell As Range
Dim rangefound As Integer
Dim lastRow As Long
lastRow = Sheet1.Range("B" & Rows.Count).End(xlUp).Row
rangefound = Sheet1.Cells(lastRow, 2).Value
Set cell = Sheet2.Range("B:B").Find(rangefound)
MsgBox "The value was found in Sheet2!" & cell.Address
End Sub
The issues with your code were
using rangefound before it had a value, i.e. the order of the commands
using "rangefound" as a text instead of the variable
wrong syntax to assign a value to rangefound
not qualifying which sheet should be searched
Edit: To extend the code to copy the data below the found value to another sheet, use Offset to reference one row below. There are many different ways to do this, so using Offset is just one option.
Here is the complete code
Sub test()
Dim mycell As Range, RangeToCopy As Range
Dim rangefound As Integer
Dim lastRow As Long
lastRow = Sheet1.Range("B" & Rows.Count).End(xlUp).Row
rangefound = Sheet1.Cells(lastRow, 2).Value
' this is the cell with the found value
Set mycell = Sheet2.Range("B:B").Find(rangefound)
' now find the last row in Sheet2. We can use lastRow again,
' since it is no longer needed elsewhere
lastRow = Sheet2.Range("B" & Rows.Count).End(xlUp).Row
' set the range to copy to start one cell below rangefound
' to the end of the data in column B
Set RangeToCopy = Sheet2.Range(cell.Offset(1, 0), Sheet2.Cells(lastRow, "B"))
' copy the range and paste into Sheet3, starting at A1
RangeToCopy.Copy Sheet3.Range("A1")
End Sub
Note: I changed the variable name from "cell" to "mycell". It's better to use variable names that cannot be mistaken for Excel artifacts.
Another edit: If you need to paste into the next free row in Sheet3, use the techniques already established.
[...]
Set RangeToCopy = Sheet2.Range(cell.Offset(1, 0), Sheet2.Cells(lastRow, "B"))
' get the next available row in Sheet3
lastRow = Sheet3.Range("A" & Rows.Count).End(xlUp).Row + 1
' copy and paste
RangeToCopy.Copy Sheet3.Range("A" & lastRow)
[...]
Note that I'm using the same variable for three different purposes. If that is too confusing, create three distinct variables instead.
I have 2 columns A and B
I want to copy the Column A data into Column B. There are few blank cells in A, but those blanks should not overwrite any data in column B. Only the cells which have data should be copied into B.
How can this be achieved in VBA?
This is probably not a complete solution, but might give you some ideas:
Sub test()
Dim R As Range
Set R = Range("A:A").SpecialCells(xlCellTypeConstants, 23)
R.Offset(0, 1).Value = R.Value
End Sub
If the data in column A include computed values, this might not work as intended.
Since you have a conditional paste, you will need to loop here. Check each value in Column A and move the VALUE to Column B (if-and-only-if Column A is not blank)
Sub Jeeped()
Dim ws As Worksheet: Set ws = ThisWorkbook.Sheets("Sheet1")
Dim lr As Long, i
lr = ws.Range("A" & ws.Rows.Count).End(xlUp).Row
For i = 2 To lr
If ws.Range("A" & i) <> "" Then
ws.Range("B" & i).Value = ws.Range("A" & i).Value
End If
Next i
End Sub
I have excel with 5 different sheets.
sheet3 and sheet4 i want delete rows based on the single column cell value.
in sheet 3 i want to delete rows based on H column cell values if H2="#N/A" and H503="#N/A" then delete entire rows.
in sheet 4 i want to delete rows based on b column cell values if B2="320857876",B3="32085678",B4="12133435" the delete the entire rows where B column cell values starts with 302.
and i want to delete all Data from 'C' column
My excel sheet is like this
Using excel file
Sub Create()
Dim LastRow As Long
Dim i As Long
LastRow = Range("B10000").End(xlUp).Row
For i = LastRow To 1 Step -1
If Range("B" & i) = "#N/A" Then
Range("B" & i).EntireRow.Delete
End If
Next
End Sub
You've got a few requirements there and your code is fairly light but regarding the #N/A part of it, you can't just test for that text using the value approach, which is the default property returned for a range object.
Sub Create()
Dim LastRow As Long, i As Long
LastRow = Range("B10000").End(xlUp).Row
For i = LastRow To 1 Step -1
If Range("B" & i).Text = "#N/A" Then
Range("B" & i).EntireRow.Delete
End If
Next
End Sub
... you need to use .Text to get that to work, or, If IsError(Range("B" & i)) Then is another approach.
The rest of your requirements is just logic. The rest of your code is relatively sound so you just need to work through it.
I hope that helps.
Sub delete_rows()
Dim sheet As Worksheet, cell As Range
Count = 1
For Each sheet In ThisWorkbook.Worksheets
If Count = 3 Then
lastrow = sheet.Cells(sheet.Rows.Count, "H").End(xlUp).Row
Set Rng = sheet.Range("H1:H" & lastrow)
For i = Rng.Cells.Count To 1 Step -1
If Application.WorksheetFunction.IsNA(Rng(i).Value) Then
Rng(i).EntireRow.Delete
ElseIf Rng(i).Value = "#NA" Then
Rng(i).EntireRow.Delete
End If
Next
ElseIf Count = 4 Then
lastrow = sheet.Cells(sheet.Rows.Count, "B").End(xlUp).Row
Set Rng = sheet.Range("B1:B" & lastrow)
Debug.Print (Rng(4).Text)
If Rng(2).Value = "320857876" And Rng(3).Value = "32085678" And Rng(4).Value = "12133435" Then
For i = Rng.Cells.Count To 1 Step -1
If Left(Rng(i).Value, 3) = "302" Then
Rng(i).EntireRow.Delete
End If
Next
End If
lastrow = sheet.Cells(sheet.Rows.Count, "C").End(xlUp).Row
Set Rng = sheet.Range("C1:C" & lastrow)
For Each cell In Rng
cell.Value = ""
Next cell
End If
Count = Count + 1
Next
End Sub
I need to use VBA code to populate a list of filtered blank cells. I decided to make a picture with small example to explain it easier. Column D should be populated with names from col A repeating until each ID has a name.
I have absolutely no idea how to loop it to make it work - it's mind boggling! I have been searching the web for hours so I am now asking for help. Please note that column C and D are filtered with criteria blanks for column D.
Here is working code to populate blank cells of a filtered list with the same 3 names alternating.
Sub Macro1()
Dim last As Long
Dim counter As Integer
Dim nameRange As Range
Dim cell As Range
last = Range("A2").End(xlDown).Row
Set nameRange = Range("D2:D" & last).SpecialCells(xlCellTypeVisible)
counter = 1
For Each cell In nameRange
If counter = 1 Then
cell.Value = "Carrie"
counter = counter + 1
ElseIf counter = 2 Then
cell.Value = "Lisa"
counter = counter + 1
Else
cell.Value = "Bob"
counter = 1
End If
Next
End Sub
thanks for everyone's input - Hopefully, this will help someone else in the future.
This will do it without the need of filtering the data.
Sub foo()
Dim ws As Worksheet
Dim lastrowa As Long
Dim lastrowd As Long
Dim counta As Long
Dim rng As Range
counta = 2 'First row of name list in column A
Set ws = Sheets("Sheet1")
With ws
lastrowa = .Range("A" & .Rows.Count).End(xlUp).Row
lastrowd = .Range("D" & .Rows.Count).End(xlUp).Row
For Each rng In .Range(.Cells(2, 5), .Cells(lastrowd, 5))
If rng.Value = "" Then
rng.Value = .Cells(counta, 1).Value
If counta = lastrowa Then
counta = 2
Else
counta = counta + 1
End If
End If
Next rng
End With
End Sub
Range("D2:D4").Value = Range("A2:A4").Value
Range("D2:D4").AutoFill Destination:=Range("D2:D11")
If you don't know where column C ends that is easy enough to work out. Something like
Range("D2:D4").Value = Range("A2:A4").Value
Range("D2:D4").AutoFill Destination:=Range(Range("D2"), _
Range("C2").End(xlDown).Cells(1, 2))
If you don't know how far the data extends in column A:
Dim last As Integer
last = Range("A2").End(xlDown).Row
Range("D2:D" & last).Value = Range("A2:A" & last).Value
Range("D2:D" & last).AutoFill Destination:=Range(Range("D2"), _
Range("C2").End(xlDown).Cells(1, 2))
My example doesn't work perfectly, or even well... Its late :)
Create a named range that encapsulates all your "names" (called namesRange in my example).
In your "assigned" column put the following formula:
=INDEX(namesList,ROW()-((INT(ROW()/ROWS(namesList))*ROWS(namesList))),1)
Update...
Thought about it, and remembered how to excel a little more.. The following is what I was trying to do in my first example.
=INDEX(namesList,MOD(ROW()-1,ROWS(namesList)-1)+1,1)