I have 2 columns A and B
I want to copy the Column A data into Column B. There are few blank cells in A, but those blanks should not overwrite any data in column B. Only the cells which have data should be copied into B.
How can this be achieved in VBA?
This is probably not a complete solution, but might give you some ideas:
Sub test()
Dim R As Range
Set R = Range("A:A").SpecialCells(xlCellTypeConstants, 23)
R.Offset(0, 1).Value = R.Value
End Sub
If the data in column A include computed values, this might not work as intended.
Since you have a conditional paste, you will need to loop here. Check each value in Column A and move the VALUE to Column B (if-and-only-if Column A is not blank)
Sub Jeeped()
Dim ws As Worksheet: Set ws = ThisWorkbook.Sheets("Sheet1")
Dim lr As Long, i
lr = ws.Range("A" & ws.Rows.Count).End(xlUp).Row
For i = 2 To lr
If ws.Range("A" & i) <> "" Then
ws.Range("B" & i).Value = ws.Range("A" & i).Value
End If
Next i
End Sub
Related
I have the below code where in all other columns there is many populated rows, what I need this formula to do in column F is to find the first blank, then place the formula in it and fill it down to the last row.
What is currently happening is I have the range as F26 as this is usually first blank but this could change and I want the code to identify this and also have the formula dynamically know what row it is on, so for example if one month the first blank was in cell F30 the range would find it and the formula would start as E30*G30.
Any help would be greatly appreciated.
Private Sub calc()
Dim lastrow As Long
Dim rng As Range
lastrow = ThisWorkbook.Worksheets("Indiv").Cells(Rows.Count, 1).End(xlUp).Row
Set rng = Range("F26:F" & lastrow)
rng.Formula = "=Round((E26*G26),2)"
End Sub
You need to find the first free row in column F and then bulid your formula with this row:
Option Explicit
Private Sub calc()
Dim ws As Worksheet ' define worksheet
Set ws = ThisWorkbook.Worksheets("Indiv")
Dim LastRowA As Long ' find last used row in column A
LastRowA = ws.Cells(ws.Rows.Count, 1).End(xlUp).Row
Dim FirstFreeRowF As Long ' find first free row in column F (if first 2 rows have data)
FirstFreeRowF = ws.Cells(1, "F").End(xlDown).Row + 1
' fix issue if first or second row is empty
If FirstFreeRowF = ws.Rows.Count + 1 Then
If ws.Cells(1, "F").Value = vbNullString Then
FirstFreeRowF = 1
ElseIf ws.Cells(2, "F").Value = vbNullString Then
FirstFreeRowF = 2
End If
End If
' define range to add formula
Dim Rng As Range
Set Rng = ws.Range("F" & FirstFreeRowF, "F" & LastRowA)
' add formula
Rng.Formula = "=Round((E" & FirstFreeRowF & "*G" & FirstFreeRowF & "),2)"
End Sub
So this will consider F5 the first free row and fill in the formula in the selected range as seen below:
I think you should find the last used row in column F, so that you could know the next row is blank
lastrowF=sheets(sheetname).range("F" & rows.count).end(xlup).row
So the next row would be like
range("F" & lastrowF+1).formula="Round((E" & lastrowF+1 & "*G" & lastrowF+1 & ",2)"
I have excel with 5 different sheets.
sheet3 and sheet4 i want delete rows based on the single column cell value.
in sheet 3 i want to delete rows based on H column cell values if H2="#N/A" and H503="#N/A" then delete entire rows.
in sheet 4 i want to delete rows based on b column cell values if B2="320857876",B3="32085678",B4="12133435" the delete the entire rows where B column cell values starts with 302.
and i want to delete all Data from 'C' column
My excel sheet is like this
Using excel file
Sub Create()
Dim LastRow As Long
Dim i As Long
LastRow = Range("B10000").End(xlUp).Row
For i = LastRow To 1 Step -1
If Range("B" & i) = "#N/A" Then
Range("B" & i).EntireRow.Delete
End If
Next
End Sub
You've got a few requirements there and your code is fairly light but regarding the #N/A part of it, you can't just test for that text using the value approach, which is the default property returned for a range object.
Sub Create()
Dim LastRow As Long, i As Long
LastRow = Range("B10000").End(xlUp).Row
For i = LastRow To 1 Step -1
If Range("B" & i).Text = "#N/A" Then
Range("B" & i).EntireRow.Delete
End If
Next
End Sub
... you need to use .Text to get that to work, or, If IsError(Range("B" & i)) Then is another approach.
The rest of your requirements is just logic. The rest of your code is relatively sound so you just need to work through it.
I hope that helps.
Sub delete_rows()
Dim sheet As Worksheet, cell As Range
Count = 1
For Each sheet In ThisWorkbook.Worksheets
If Count = 3 Then
lastrow = sheet.Cells(sheet.Rows.Count, "H").End(xlUp).Row
Set Rng = sheet.Range("H1:H" & lastrow)
For i = Rng.Cells.Count To 1 Step -1
If Application.WorksheetFunction.IsNA(Rng(i).Value) Then
Rng(i).EntireRow.Delete
ElseIf Rng(i).Value = "#NA" Then
Rng(i).EntireRow.Delete
End If
Next
ElseIf Count = 4 Then
lastrow = sheet.Cells(sheet.Rows.Count, "B").End(xlUp).Row
Set Rng = sheet.Range("B1:B" & lastrow)
Debug.Print (Rng(4).Text)
If Rng(2).Value = "320857876" And Rng(3).Value = "32085678" And Rng(4).Value = "12133435" Then
For i = Rng.Cells.Count To 1 Step -1
If Left(Rng(i).Value, 3) = "302" Then
Rng(i).EntireRow.Delete
End If
Next
End If
lastrow = sheet.Cells(sheet.Rows.Count, "C").End(xlUp).Row
Set Rng = sheet.Range("C1:C" & lastrow)
For Each cell In Rng
cell.Value = ""
Next cell
End If
Count = Count + 1
Next
End Sub
I have a range of data, with CASE ID's in Column A, and Issues (1 through 10, or Columns B through K) in Columns B onwards.
Once certain issues are ruled out as 'normal', they would be removed from the Issues sheet based on their respective column. For ex: CASE ID #25, Issue 4 is ruled OK, then it would be deleted from Row 25, Column 5 (or Column E) but the CASE ID would remain.
The goal is that by doing this check after the fact, it may leave certain rows entirely blank, from Column B onwards (since the CASE ID would already be there.)
My code doesn't function successfully. Once run, it highlights several rows that are not entirely blank in the target range.
I'm trying to pinpoint rows in the range B2:P & lastrow where the entire row is blank, and then highlight these rows and subsequently delete them.
Code:
Public Sub EmptyRows()
lastrow = Sheets("Issues").Cells(Rows.Count, "A").End(xlUp).row
On Error Resume Next
Sheets("Issues").Activate
For Each rng In Range("B2:P" & lastrow).Columns
rng.SpecialCells(xlCellTypeBlanks).EntireRow.Interior.ColorIndex = 11
'rng.SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Next rng
Application.ScreenUpdating = True
End Sub
The purpose of first highlighting is to test the code works. If successful, they would be deleted entirely.
Your description says Columns B through K, but your code has B through P...
You can do it like this (adjust resize for actual columns involved):
Public Sub EmptyRows()
Dim lastRow As Long, sht As Worksheet, c As Range, rngDel As Range
Set sht = Sheets("Issues")
For Each c In sht.Range(sht.Range("A2"), sht.Cells(Rows.Count, 1).End(xlUp)).Cells
If Application.CountA(c.Offset(0, 1).Resize(1, 10)) = 0 Then
'build range to delete
If rngDel Is Nothing Then
Set rngDel = c
Else
Set rngDel = Application.Union(rngDel, c)
End If
End If
Next c
'anything to flag/delete ?
If Not rngDel Is Nothing Then
rngDel.EntireRow.Interior.ColorIndex = 11
'rngDel.EntireRow.Delete '<< uncomment after testing
End If
End Sub
Once run, it highlights several rows that are not entirely blank in the target range.
This is because you are selecting all blanks, instead of only rows where the entire row is blank.
See the code below
Public Sub EmptyRows()
With Sheets("Issues")
lastrow = .Cells(Rows.Count, "A").End(xlUp).row
Dim rng as Range
For Each rng In .Range("B2:B" & lastrow)
Dim blankCount as Integer
blankCount = Application.WorksheetFunction.CountA(rng.Resize(1,.Range("B:P").Columns.Count))
If blankCount = .Range("B" & lastRow & ":P" & lastRow).Columns.Count Then
Dim store as Range
If store Is Nothing Then Set store = rng Else: Set store = Union(rng, store)
End If
Next rng
End With
store.EntireRow.Interior.ColorIndex = 11
'store.EntireRow.Delete
End Sub
Gathering the ranges first and then modified them (changing color or deleting) will help to execute the code faster.
Here is another approach, using CountA
For Each cell In Range("A2:A" & Cells(Rows.Count, "A").End(xlUp).Row)
Dim rng As Range
Set rng = Range("A" & cell.Row & ":" & "P" & cell.Row)
If Application.WorksheetFunction.CountA(rng) = 1 Then
rng.EntireRow.Interior.ColorIndex = 11
End If
Next cell
I have a two column look up table. Column 1 is a fixed list of items and column 2 has a formula in it.
In another table when someone enters data in say cell a1 and it matches an item in column 1 of my look up table I need the corresponding formula from column 2 copied and pasted into cell b2.
Lots of google searching trying to find a way for VLOOKUP to copy formula in lieu of cell value has returned nothing so I assume the only way to do it is via VBA?
This small sample assumes the data is in columns C and D:
Sub Matt()
Dim r As Range, Tabl As Range
Set Tabl = Range("C1:C1000")
Set r = Tabl.Find(What:=Range("A1").Value, After:=Tabl(1))
Range("B1").Formula = r.Offset(0, 1).Formula
End Sub
place a value in A1 and run the macro
EDIT#1:
This version will loop down column A
Sub Matt_The_Sequel()
Dim r As Range, Tabl As Range, N As Long
Set Tabl = Range("C1:C1000")
N = Cells(Rows.Count, "A").End(xlUp).Row
For i = 1 To N
Set r = Tabl.Find(What:=Range("A" & i).Value, After:=Tabl(1))
Range("B" & i).Formula = r.Offset(0, 1).Formula
Next i
End Sub
EDIT#2:
Sub Matt_The_Sequel2()
Dim r As Range, Tabl As Range, N As Long
Dim First_Row As Long
Set Tabl = Range("C1:C1000")
N = Cells(Rows.Count, "A").End(xlUp).Row
First_Row = 4
For i = First_Row To N
Set r = Tabl.Find(What:=Range("A" & i).Value, After:=Tabl(1))
Range("B" & i).Formula = r.Offset(0, 1).Formula
Next i
End Sub
I realize there are a few different similar ideas on here. But I need help with this simple compare function.
My goal is to compare two different cells and if they are the same, replace it with its full non-abbreviated name.
Thank you for your time!!!
I.E
Sheet1 Sheet2
Column H Column A Column B
Dept Dept Department
This is what I have (Yes simple), but the cell H is not updating to the non-abbreviation:
Sub updateDeptNames()
'Format user ID from the email column
Dim ws As Worksheet, ws2 As Worksheet
Dim LastRow As Long, i As Long
Dim tmpArray() As String, tempDept As String
Set ws = ActiveWorkbook.Sheets("Student_Travel_DB") '--> This is the relevant sheet
Set ws2 = ActiveWorkbook.Sheets("gokoutd") '--> This is the relevant sheet
LastRow = 1000 ''Bug finding the last row, had to hard code it
For i = 2 To LastRow 'Iterate through all the rows in the sheet
For j = 2 To 112
tempDept = ws2.Range("A" & j).Value
If ws.Range("H" & i).Value = tempDept Then
ws.Range("H" & i) = ws2.Range("B" & j).Value
End If
Next j
Next i
End Sub
You can more easily use VLOOKUP either on your worksheet or with VBA:
Sub GetFullName()
Dim cl As Range, data As Range, lookUpRng As Range
Set data = Worksheets("Student_Travel_DB").Range("A1:A10")
Set lookUpRng = Worksheets("gokoutd").Range("A1:B10")
On Error Resume Next
For Each cl In data
cl = WorksheetFunction.VLookup(cl, lookUpRng, 2, False)
Next cl
End Sub
You'll need to change your range references.