I have an if condition in an ADF activity like below:
#if(
contains(activity('LookupWmkLastUpdateConfig').output,'firstRow')
,greater(
activity('LookupLastUpdateSrc').output.lastModified
,activity('LookupWmkLastUpdateConfig').output.firstRow.NewValueWatermark)
),
false)
The if condition looks as the last update date in src vs my database. Want I want to include is an additional block of code that evaluates an outside parameter called TypeLoad.
The current set-up only allows for full loads, I want to be able to include delta loads.
Does anyone know how to include such a piece of logic to the existing if code?
equals(pipeline().parameters.FwkItem['TypeLoad'],1)
The above condition would for example evaluate the full or delta load.
All help is very welcome.
Thanks!
I tried to repro this in my environment. I gave the same expression
#if(
contains(activity('LookupWmkLastUpdateConfig').output,'firstRow')
,greater(
activity('LookupLastUpdateSrc').output.lastModified
,activity('LookupWmkLastUpdateConfig').output.firstRow.NewValueWatermark)
),
false)
Same error function 'if' does not accept 2 arguments is occurred.
When the expression is looked into the reason for error, there were two closing parentheses near ,activity('LookupWmkLastUpdateConfig').output.firstRow.NewValueWatermark) ) .
Same is highlighted in the above image.
one parenthesis is removed and gave the expression as in below image.
#and(equals(pipeline().parameters.fwkitem,1),if(contains(activity('LookupWmkLastUpdateConfig').output,'firstRow'),greater(
activity('LookupLastUpdateSrc').output.lastModified
,activity('LookupWmkLastUpdateConfig').output.firstRow.NewValueWatermark)
,false))
Expression doesn't produce any error now.
Related
I can't send the question due to some mysterious error, so I'll share a screenshot of the question.
Can anyone help me solve this?
I have reproduced the above and got same error when the Expression checkbox in checked.
Remove the Expression checkbox check in dataflow pipeline assignment and pass it as a string. Now it won't give the error.
It will take the Dataflow parameter like this.
Also, along with the Date time string pass the format in toTimestamp() function to avoid null values.
This is my sample input data:
sample filter condition:
toTimestamp(start_date,'yyyy-MM-dd\'T\'HH:mm:ss')
Filtered Result:
Hi im currently adding some new features to a bot and it's been going great with some amazing progressions each day. I ran into an issue that i can't seem to solve even though i feel like the solution is right in front of me. In my code i have an if statement to check if a user has more matches won than 22 in the database, if so they are allowed to equip a certain background if not it returns an error message. I tried to do another if statement to check if a certain user is trying to run the command by matching their discord ID and for some reason it runs both the if statements when doing either command even though i used message.content.includes to specify what arguments it should look for in the command. Any help would be appreciated
According to the mozilla docs:
The comma operator (,) evaluates each of its operands (from left to right) and returns the value of the last operand.
This means that only the second operand in each if statement is being returned, ignoring message.content.includes().
Changing the , to && should fix the issue.
source: https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Operators/Comma_Operator
I am working on Verigy 93K test program and I have a logic that I would like to know if there's an equivalent code in Origen.
I am working on Verigy 93K test program and I have this logic (IF condition) that I need to insert in my flow.
Basically, I have a variable called 'INSERTION' and this will have different values like 'GCORR', 'VCORR' and others.
I would like to know if there's an equivalent code like this in Origen.
I attached a snapshot, hope that it can help clarify my question more.
In this logic, I would like to check the INSERTION value and if the value is not equal to GCORR or VCORR, the logic should pass, else, fail.
Here is the screenshot:
This pull-request adds an official API for this.
This example would be implemented as:
whenever_any ne(:INSERTION, 'GCORR'), ne(:INSERTION, 'VCORR') do
# Your tests in here
end
That would produce something logically equivalent and which can be re-targeted to other platforms.
If you don't care about that and want to produce exactly as you have it in the above example, then this should work too (where the OR is hard-coded for V93K syntax):
whenever ne(:INSERTION, 'GCORR|VCORR') do
# Your tests in here
end
Here is the preliminary documentation of this feature from the above PR - https://github.com/Origen-SDK/origen_testers/blob/66345c9422d9fa6b2577af20110259e45c2bdd26/templates/origen_guides/program/flowapi.md.erb#L71
I couldn't find api support on flow control or variable values beyond "if/unless_enable" support which can help check for 1 or zero. One way is to use render.
render 'if #INSERTION != "GCORR|VCORR" then'
render '{'
# your code for non-GCORR_VCORR flow
render "} \n else \n { \n } "
I'm trying to output a template variable inside the if statement in ModX, but it gives no output.
I have multiple pages with links to articles and the point is to only output template variable content on the first page but not the others.
// This gives no output:
[[!#get.page:is=`1`:or:is=``:then=`[[*content]]`:else=``]
// This outputs "yes" on the first page and "no" on others:
[[!#get.page:is=`1`:or:is=``:then=`yes`:else=`no`]]
I've even tried this, but it still does not give any output. I guess the problem is not about the output modifier:
[[!#get.page:is=`1`:or:is=``:then=`[[*content]]`:else=`[[*content]]`]
I'm using ModX Revo 2.7.0
Any help is appreciated, thanks in advance!
Actually in your case missing a double closing angle bracket "]]"
[[!#get.page:is=`1`:or:is=``:then=`[[*content]]`:else=``]]
The `or:is=` is matching against an empty state. Unless that is intentional you should be able to remove it. Also, the `:else=`` is the default state, so, you don't need that either.
The following should work and you'll have cleaner code:
[[!#get.page:is=`1`:then=`[[*content]]`]]
I am using evaluate function in lotusscript to get a value of certain expression.
The formula is working fine when kept in the column of a view, but as soon as it is passed in evaluate, it is throwing error as "Error in evaluate macro", might be I am using wrong suntax.
Set Eval= Evaluate({#Text(#If(#Member(#Subset(txtRejectedApprovers;-1);txtApprover1:txtApprover2:txtApprover3:txtApprover4)-#Member(#Name([CN];txtApprovedApprovers[n]);txtApprover1:txtApprover2:txtApprover3:txtApprover4)>0;"1";"0")))},foundDoc)
txtApprover1 and other fields are coming from foundDoc document.
First thing. You shouldn't use such complex evaluate statement because if there are errors or unexpected results its very difficult to find the reason.
I think your error is one bracket to much at the end of your statement. Here is the code which doesn't return the error:
Set Eval= Evaluate({#Text(#If(#Member(#Subset(txtRejectedApprovers;-1);txtApprover1:txtApprover2:txtApprover3:txtApprover4)-#Member(#Name([CN];txtApprovedApprovers[n]);txtApprover1:txtApprover2:txtApprover3:txtApprover4)>0;"1";"0"))},foundDoc)