I have looked everywhere and I am still unable to switch off this 'feature'!
I've been using vi and, later, vim, since the 80's and I have never had need of multiple cursors, nor can I see a use for them.
:<range>s/search/replace/ does everything I need so this new feature is infuriating beyond words, especially as I've no idea how to switch it off when it seemingly-randomly appears.
Would someone be wonderful enough as to tell me how to banish, remove, consign-to-history the multiple cursors feature in VSCode Vim 1.12.4, please?
I believe this issue is specific to the plugin. I experienced it with the HTML plugin recently, and I'm assuming you have the same problem with HTML files, but the same principle should apply to other plugins as well. You just have to find the setting.
In the VS Code settings, there is an option that reads:
HTML: Mirror Cursor On Matching Tag
You can uncheck the box there to disable the feature. Or you can go to the settings.json in your local repo (inside the .vscode directory), or the equivalent global file, and add/modify the following field like so:
"html.mirrorCursorOnMatchingTag": false
That should take care of it for you.
I use PyCharm using the Vim emulation feature IdeaVim.
I have tried, without success, to integrate snipMate into PyCharm, which works like a Charm :P in the standard Vim.
Does anybody known if there is a Vim snippet pluging which is compatible with PyCharm? Also, can you use snipMate within PyCharm? It does not even seem to be loaded in my case!
IdeaVim doesn't provide the functionality of snippets.
In IntelliJ IDEA snippets are called "Live Templates". They can be used and configured as follows: https://www.jetbrains.com/help/idea/using-live-templates.html
I've just started doing Ruby on Rails development.
I'm trying to get the best of both worlds. I love getting around a file with just the keyboard like I can with vim. But opening up and find the files from the command line is a drag.
I'd love to be able to click a file open in Aptana and then be able to navigate around it with vim commands to do my actual editing.
I haven't been able to find any definitive solution for getting this working on a mac. I tried installing software for it with Aptana under Help >> Install new software as linked to from here: http://satyavvd.blogspot.com/2010/05/aptana-studio-with-vi-emulation.html but the link is 2 years old I couldn't figure out how to get it running.
Has anybody out there gotten this to work?
I'm using Aptana 3.2.2
You know you can right click on a file and choose which editor to use, do you? Or assign any editor -- internal or external -- to any filetype in Aptana's preferences?
Aptana is based on Eclipse so all the Vi(m) plugins that work in one are probably going to work in the other.
Take a look at these five plugins:
Vrapper
A "regular" Eclipse editor with many Vi(m) key-bindings.
viPlugin
Idem, payware.
Viable
Idem, payware.
vimplugin
Run Vim inside of Eclipse/Aptana. I don't think that it works on a Mac.
eclim
Eclipse and Vim talking through a server.
But if you only want a more convenient way to open files in Vim I can't recommand CtrlP enough. You could also try the similar but different FuzzyFinder, LustyExplorer or Command-T) or you could get more familiar with Vim's :e **/foo<Tab>.
I am using VIM to code PHP. I also have indexed my project folder with ctags. It works pretty well with omnicompletion, so when I type for example $someObject-><C-X><C-O> it shows all methods of the object.
I am working with the SuperTab plugin too though, and when this plugin is active, I cannot hit anymore. Nothing happens, only below in the status bar INSERT becomes (insert).
Does anyone have an idea why doesn't work with SuperTab?
Ok, an update to the newest version of SuperTab (0.51) helped solve the problem
I have spent lot of time doing research on VIM. I am Windows guy since last 6 yrs and was using VS.
Now started working on Linux. I want to make VIM as close as possible to VS.
I want features like
Project Navigation
Files in Different Tabs
Search in Project
AutoCompletion
I have found plugins for the above requirements
Project Pligin
MiniExplore
Taglist
OmniComplete
I am not able to correctly set vimrc script.
When I try to open file from Project it gets open in different tabs.I want to get it open in different buffers.
Also when I want to close file in buffer , complete window gets closed.
Open taglist and project window makes all mess.
Has any one done settings with these plugin..
Could you guys please post your vimrc files??
It will save lot of time for newbies like me..
Vim is a very different tool than Visual Studio. Plugins may help you get certain bits of functionality you desire, but do not expect them to work exactly like VS, work well together, or even work at all.
If you are looking for a programming environment more like Visual Studio, there are many good graphical IDE's you can use such as NetBeans, Eclipse, Code::Blocks, KDevelop, Anjuta, etc. Some of these tools are, IMHO, better heavyweight IDE's than Visual Studio, and all are available on Linux for free.
You should either learn to use Vim the way it was built to be used, or find a different tool that suits you better. Shoehorning Vim into a surrogate for Visual Studio will probably cause you more pain than it's worth.
Yes it's different to VS, but that doesn't mean it can't be used in the same way. It's just not as easy to do it :)
Personally I go the other way and use ViEmu to get VS to behave like VIM. But I'm not in the same situation as the author of this question.
Why not have a dig through some uploaded vimrc files on dotfiles.org?
You can use the following script, Trinity.
http://www.vim.org/scripts/script.php?script_id=2347
It will require 3 more scripts, and Vim will look like an IDE.
The TagList at left, a file exporer (NERDTree) at right, and Source Explorer at bottom.
Also, you can find some very useful blog entries at
http://kevin-berridge.blogspot.com/search/label/vim
The author, Kevin, explains how to compile solutions form inside Vim. He also shows interfacing and jumping between them which is very useful too.
Furhermore, there is the script vim-visual-studio which can be found at
http://code.google.com/p/vim-visual-studio/
This script is using Python extension. I have Python 2.5 installed in Windows. I am using Gvim 7.2 which is compiled with Python 2.4. So, I have replaced the executables of Gvim as explained here:
http://www.gooli.org/blog/gvim-72-with-python-2526-support-windows-binaries/
So, Gvim became compatible with Python 2.5 and raised no problems. Also, a menu entry "Visual Studio" has appeared as expected. It connects to Visual Studio itself, and it works perfectly. It does not just compiles a file, it can compile a solution containing more than one project as in Visual Studio. You can even use the Vim's 'quickfix' feature. Hope this helps.
If you really want to have vim as the front end, try Eclim. It uses Eclipse as a backend daemon for code completion and project management, and vim as the interface.
If you only like vim because of the vi key bindings, but want it to be more IDE like, you could try the latest MonoDevelop that has it built in.
These plugins used to exist long before vim had tabs. I'd be quite surprised there isn't a way to tune these plugins to split windows instead of opening tabs.
Now I can't help you much as I don't use these specific plugins but other ones. You should look at their help (:h project, :h taglist, etc)
PS: in vim terminology (it will help you browse the help files), what you call "buffer" is actually called "window", while a "buffer" is just the text you are working on, it may be associated to a file, or not. For a given buffer, there may be no or several window displaying parts of the buffer.
you can give a try to eXvim
http://code.google.com/p/exvim/