I have problems when I want to generate a new MR through the CURL. This is what I'm writing.
curl --request POST --header "PRIVATE-TOKEN: $TOKEN_FINTECH" "https://$gitlab/api/v4/projects/$id/merge_request/" {"source_branch":"TestBranch","target_branch":"LAD-Wiru","title":"This is a test","state":"opened"}
But when I run my job with this line, it returns the following
{"error":"404 Not Found"}curl: (3) URL using bad/illegal format or missing URL curl: (3) URL using bad/illegal format or missing URL curl: (3) URL using bad/illegal format or missing URL
I searched in several places but I still don't understand how to solve it. :C
In general, you want to pass the parameters by appending them to the URI.
You're also missing an s at the end of merge_requests, and passing some attributes (such as state) that are not available in the create MR endpoint, so you'll need to correct those.
Most likely, you want something like this:
curl --request POST --header "PRIVATE-TOKEN: $TOKEN_FINTECH" "https://gitlab.example.com/api/v4/projects/1234/merge_requests?source_branch=TestBranch&target_branch=LAD-Wiru&title=This%20is%20a%20test"
If you prefer not to append the attributes to the URI, you can use --data instead of --request POST.
Related
I have links .php how do I substitute my values in all parameters using curl post?
Provided that I do not know what the parameters are in these php links, curl should determine for itself what parameters are in the post request and substitute my values.
If I know the parameter, then I can send it to the links like this:
while read p; do
curl $p -X POST --connect-timeout 18 --cookie "" --user-agent "" -d "parametr=helloworld" -w "%{url}:%{time_total}s\n"
done < domain.txt > output.txt
And if I do not know the parameters, what should I do? How to make curl automatically substitute values into parameters? For example, the value: "hello world" provided that I did not know "parameter"
It's simply not possible. curl is a client program and has no way of knowing or finding out which request parameters are supported by a server or which are not.
Unless of course, the API is properly documented and available as an OpenAPI/Swagger specification for example. If it isn't, you're out of luck.
I have seen that there is query to fetch commits using since or until in gitlabapi query. I want to fetch the response for a particular date.
Example: I want to fetch the response for a repository's commit on 2022-04-18. I have tried with the following query but the & operation didn't work
curl --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/projects/5/repository/commits?first_parent=true&since=2022-04-18&until=2022-04-18"
Response is displayed if I use:
curl --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/projects/5/repository/commits?first_parent=true&since=2022-04-18"
In this case, later dates commits are also displayed. I want to see only the commits on 2022-04-18.
Try to specify the until and since in ISO 8601 format.
To get a specific day you need to specify a day period e.g
curl --header "PRIVATE-TOKEN: <your_access_token>" "https://gitlab.example.com/api/v4/projects/5/repository/commits?first_parent=true&since=2022-04-18T00:00:00Z&until=2022-04-18T23:59:59Z"
I'm trying to use curl to send an image to a device.
this is the code :
#!/bin/bash
curl --header 'Access-Token: d78sdf8bd8bv6d98bd7d6df6b' \
--header 'Content-Type: application/json' \
--data-binary '{"type":"file","title":"Test IMG SEND","body":"Sending Dragon from Debian 8","file_name":"dr1.jpg","file_type":"image/jpeg","file_url":"https://dl2.pushbulletusercontent.com/HJGFC56597ggiyui78698GYGUFI7865/dr1.jpg"}' \
--request POST \
https://api.pushbullet.com/v2/pushes
and this is what I got from the previous upload :
{"data":{"acl":"public-read","awsaccesskeyid":"JSUH(=Y£GhHUIOG898787","content-type":"image/jpeg","key":"HJGFC56597ggiyui78698GYGUFI7865/dr1.jpg","policy":"ecvjksdblvuio3ghuv393783230cgfgsaidfg3","signature":"hjveirvhj34veupiv34'vvg3vg78"},"file_name":"dr1.jpg","file_type":"image/jpeg","file_url":"https://dl2.pushbulletusercontent.com/HJGFC56597ggiyui78698GYGUFI7865/dr1.jpg","upload_url":"https://upload.pushbullet.com/upload-legacy/yVayDlcd
To me, it seems ok, but obviously there is something wrong. Can anyone point me to a solution?
EDIT :
I'm sorry, the problem is that the answer from pushbullet is that "The param 'file_url' has an invalid value" and I'm not able to understand where is the problem, becouse I just copied the file_url from the previous answer from the upload-request, which should be -> file_url":"https://dl2.pushbulletusercontent.com/HJGFC56597ggiyui78698GYGUFI7865/dr1.jpg ...
This error isn't clear as to what's actually invalid about the file_url request. What it should say is, "The file url you specified points to a file that does not yet exist". In other words you need to make sure the file is actually uploaded first before you can link to it.
Their docs aren't great. I had the same issue and finally stumbled upon the answer. This is actually a 3-part process:
1) POST https://api.pushbullet.com/v2/upload-request – It wasn't immediately obvious, but this is requesting access to upload your file to Push Bullet's AWS S3 Bucket. Use the data in the response for the next step.
2) POST https://upload.pushbullet.com/upload-legacy/yVayDlcd – (This should be the value from upload_url from Step 1) Everything in the data object should be posted along with the file to the upload_url in the response. The expected response should be a 204 with no content. This means it was successful.
3) POST https://api.pushbullet.com/v2/pushes – Finally now that the file exists in Push Bullet's system you can push using the file_url value from Step 1.
Hopefully this explanation adds some clarity to their docs.
curl --data "<xml>" --header "Content-Type: text/xml" --request PROPFIND url.com
By reading the curl man page I could not understand how the above commandline is using --data option.
Question:
What does above commandline do ?
Why doesn't man page describe this usage? If it does then what did I not understand after reading the man page?
The --data flag is for defining POST data.
The command sends a POST with contents <xml> and MIME type text/xml. However, with the flag --request, you are setting the HTTP method from POST to PROPFIND and sending the request to url.com.
I also did manage to find the --data flag in the manual:
-d, --data <data>
(HTTP) Sends the specified data in a POST request to the HTTP server,
in the same way that a browser does when a user has filled in an HTML
form and presses the submit button. This will cause curl to pass the
data to the server using the content-type
application/x-www-form-urlencoded. Compare to -F, --form.
-d, --data is the same as --data-ascii. To post data purely binary, you should instead use the --data-binary option. To URL-encode the
value of a form field you may use --data-urlencode.
If any of these options is used more than once on the same command
line, the data pieces specified will be merged together with a
separating &-symbol. Thus, using '-d name=daniel -d skill=lousy' would
generate a post chunk that looks like 'name=daniel&skill=lousy'.
If you start the data with the letter #, the rest should be a file
name to read the data from, or - if you want curl to read the data
from stdin. The contents of the file must already be URL-encoded.
Multiple files can also be specified. Posting data from a file named
'foobar' would thus be done with --data #filename. When --data is told
to read from a file like that, carriage returns and newlines will be
stripped out.
I am using Apache Stanbol. It works for enhancing the text, however when I tried sentiment analysis and sentence detection, it doesn't work.
I tried this code
curl -v -X POST -H "Accept: text/plain" -H "Content-type: text/plain; \
charset=UTF-8" --data "Some text for analysis" \
"http://localhost:8081/enhancer/engine/sentiment-wordclassifier"
But it gives blank { } output, I tried changing the header attributes but no luck.
am I missing something? Do I need to do some configuration first?
I even tried adding analyzer in the enhancer chain but the same blank output, also tried REST API for opennlp-sentence, but it didn't work.
I guess you are sending data to the wrong endpoint... usually calls to the enhancer need to be done to all chains:
http://host/stanbol/enhancer
or to a concrete chain:
http://host/stanbol/enhancer/chain/<name>
The enhancer results couldn't be serialized as plain text, but in any of the RDF serialization supported by Stanbol. So the Accept header would need to be any of those, text/turtle for instance.
Further details at the documentation: http://stanbol.apache.org/docs/trunk/components/enhancer/#RESTful_API