I'm in a NodeJS command-prompt session and I want to dip out to shell for a few commands and come back to my session with variables intact.
I remember doing this as a kid using "!" in another environment - can I do something like that in Node?
I just remembered about Ctrl-z / fg. Ctrl-z makes the Node session a background process and leaves me in the shell (and pauses it - if I wanted it to keep running something I could use the bg command). Then fg puts me back into the Node environment.
This is probably close enough to what I was thinking about.
I'm open to other options though!
Related
I am on windows machine, when I temporarily change to console using :sh then back to vim with exit command and then again back to console and it starts over. this causes me to lose my previous directory. Is there other way returning back to vim won't start the shell over?
Not really
https://stackoverflow.com/a/12089631/1427295
GVIM does not retain a "handle" to the shell that launched it in a way
that allows it to send commands back to it. Because of they
synchronous execution, you also cannot launch a shell from GVIM, keep
feeding it commands while also continue working in GVIM.
I'm afraid you have to use the functionality of your window manager to
launch (and then later re-activate) a shell window, and send the
commands as keystrokes to it. On Windows, this can be done (e.g. in
VBScript) via WshShell's Run(), AppActivate() and SendKeys() methods;
there are probably similar mechanisms for window control on Linux,
too.
If you don't mind having that shell inside your GVIM (emulated, with
all its drawbacks), though, there are plugins that enable that.
https://serverfault.com/a/95405
The Windows command interpreter ("cmd.exe") doesn't provide any
support for saving/exporting/keeping history, of, if it does,
Microsoft didn't document it and nobody was ever able to find it. You
can of course try to work around that, like Sean suggested, but
there's (or does appear to be) no built-in support for this
You may be able to output your command history using echo %cd% > prev_dir.txt then create a script that cds to the directory in prev_dir.txt, but you'd still have to remember to save your directory to the file before you exit the shell each time.
I have this node.js server which, once spawned, expects some input from stdin. The inputs shouldn't be given straight away: I need to wait for some event before giving them (e.g. a connection from somebody). If I give the commands and close the shell, the server shuts itself down. I would like to give the input to the server and close my shell (effectively leaving the server running).
I know that to run a process in background I need to do for example node my_server.js &, but this prevents the input from the command line. I would like to give this input AND then put it in background. Modules like forever puts it in the background automatically without letting me giving the inputs through stdin.
Moreover putting the script in background kills anyways the server when closing the shell.
Any suggestion?
Thanks
I did a quick test just using gedit in Ubuntu 12.04, and it worked.
Start your node app like so "node app.js arg1 arg2" however you want to and hit enter to start the program. Then hit CTRL-z once your program has started running. This gives you the terminal back but stops the process in the background. To let it run in the background now, simply "bg" and hit enter. This will let the process keep running now but in the background.
You can confirm you are still up with the command "ps -ef | grep node" which should show your program still running.
However, this does still leave the node process attached to the terminal window so when you close the terminal window it will close the process. But I think this will get you most of what you seem to be looking for quick and easy.
You asked for any suggestion, so here it is: make your server able to start without user interaction. The simplest way to do it is probably to create a file containing exactly the input needed by the server, then starting it like this:
node my_server.js < my_input.txt &
If the input needed depends on what the server outputs (ouch), use expect(1). If possible, subvert the whole thing and use a module like commander to get your inputs from the command line instead of stdin.
I have a recurrent problem when using R with a Linux console. I sometimes suspend it with [Ctrl+Z], then put it to the background with bg, (execute some other commands), then put it to the foreground again with fg.
R resumes correctly with all the workspace intact, but when I type, the characters are invisible (just like when we type passwords).
I still can execute commands though, and I see the response. Moreover, when I type [enter], the prompt doesn't go to the next line, but does something like this: > > >.
Then I need to quit R using q(), in order that everything returns to normal. I didn't manage to find any reference to this problem on internet.
Would you have an idea? Thanks a lot for your help.
No direct answer but via
"Doctor, doctor, it hurts when I do this."
"Then just don't do this."
I would suggest that if you must have an R console open, place it inside screen --- or if you have it, byobu a fancier extensions, or even tmux.
Or even inside the One True Editor (TM) using ESS. For what it is worth, I always run emacs --daemon and then connect to the same R session either via emacsclient -nw on the terminal or under X11 via emacsclient -c (both of which I aliased to emt and emx). I also run byobu sessions for command-line work where I often use littler for command-line tasks and tests.
Unix is a multitasking system. There is no need to limit yourself to one prompt, especially if you suffer side-effects as a consequence.
Some programs return immediately when launched from the command line, Firefox for example. Most utilities (and all the programs I've written) are tied to the shell that created them. If you control-c the command line, the program's dead.
What do you have to add to a program or a shell script to get the return-immediately behavior? I guess I'm asking two questions there, one for shell scripts and one for general, if they're different. I would be particularly interested to know if there's a way to get an executable jar to do it.
I'm almost embarrassed to ask that one but I can't find the answer myself.
Thanks!
start cmd
on Windows,
cmd &
on *nux
Here substitute
cmd = java -jar JarFile.jar
On *nux the fg and bg commands are your friends as well ...
You need to basically need to fork a process or create a new thread (or pretend to)
in *nux you can do this with an & after the command like this /long/script & or in windows you can create a BATCH file that executes your processes then exits (it does this naturally).
NOTE: there's no particularly good way to reference this process after you're forked it, basically only ps for the process list. if you want to be able to see what the process is doing, check out using screen (another linux command) that will start a session for you and let you "re-attach" to the screen.
to do this, install screen (sudo apt-get install screen or yum install screen). then type screen to create a new session (note, it will look like you didn't do anything). then, run your /long/command (without the &), then press CTRL + A + D (at the same time) to detach from it (it's still running!). then, when you want to re-attach, type screen -r.
Additionally, look for flags in any help message that allow you do this without using the above options (for instance in synergy you can say synergy --background)
A wrapper script consisting of nothing but:
your_prog_or_script &
Will launch the target and exit immediately. You can add nohup to the beginning of that line so it will continue running if the shell is exited.
For an executable program (as opposed to a shell script), on Linux/Unix use fork() and exec() and then exit the parent process, which will return to the shell. For details see the man pages, or some page like http://www.yolinux.com/TUTORIALS/ForkExecProcesses.html.
I am using Putty to connect to a remote server. What I want to know is if there is any way to write my commands and allow them to keep running after I close the session with Putty. The reason for this is that I do not want to keep the computer ON all the time. Is there any way to do this?.
Update with the solution
For my question as it is presented the best solution is use one of the commands provided such as nohup, because you do not have to install any additional software. But if you are in the same problem use screen, install it and use it. It is amazing.
I have selected the answer of Norman Ramsey as favourite because propose several solutions using commands and screen. But please check the other answers specially the one of PEZ, then you get an insight of what screen is able todo.
screen! It's the best thing since sliced bread. (Yeah, I know others have already suggested it, but it's so good the whole world should join in and suggest it too.)
screen is like, like, ummmm ... like using VNC or the like to connect to a GUI destop, but for command shell windows. You can have several shell "windows" open at once in the same screen session. You can do stuff like:
Start a screens session using "screen -dR" (get used to using -dR)
run some commands in one window
press CTRL-A,C to create a new window open a file there in vim
press CTRL-A,0 to go back to the first window and issue some command on the file you just edited
CTRL-A, 1 to go back to your vim session
CTRL-A, C for yet another window and maybe do "sudo - su" (because you just happen to need a full root shell)
CTRL-A, 0 and start a background process
CTRL-A, C to create yet a new window, "tail -f" the log for that background process
CTRL-A, d to disconnect your screen then CTRL-D to disconnect from the server
Go on vacation for three weeks
Log on to the server again and issue "screen -dR" to connect to your existing screen session
check the log in the the fourth window with CTRL-A, 3 (it's like you've been there watching it all the time)
CTRL-A, 1 to pick up that vim session again
I guess you're starting to get the picture now? =)
It's like magic. I've been using screen for longer than I can remember and I'm still totally amazed with how bloody great it is.
EDIT: Just want to mention there's now also tmux. Very much like screen, but has some unique features, splitting the windows being the most prominent one.
nohup, disown, and screen are all good but screen is the best because unlike the other two, screen allows you to disconnect from the remote server, keep everything running, and then reconnect later to see what is happening. With nohup and disown you can't resume interacting.
Try using GNU Screen. It allows you to have several shells open at once. And you can disconnect from those running shells (i.e. close session with Putty) and they will keep doing their thing.
What you are looking for is nohup.
See the wiki link for how to use it.
screen is the best.
Try:
screen -dmS "MyTail" tail -f /var/log/syslog
This start command in background.
Use screen -r to list, and or screen -r Mytail to enter session.
If more users need access same session, use: screen -rx MyTail, and both or more users share the session.
If you can't use screen (because, for instance, your SSH session is being programmatically driven), you can also use daemonize to run the program as a daemon.
One way that works well for me is at.
at works like cron, but for a one-time job. I used it today to download a large file without having to keep my session alive.
for example:
$ at 23:55
at> wget http://file.to.download.com/bigfile.iso
at> ^D
You pass at a time (in the future) and it gives you a prompt. You enter the commands you want to run at that time and hit ctrl+d. You can exit out of your session and it will run the commands at the specified time.
Wikipedia has more info on at.
./command & disown
ssh localhost && ./command && exit