After full reinstalling Fedora to version 36 I have got this error:
Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver is either not loaded or not set up correctly. Please try setting it up again by executing
'/sbin/vboxconfig'
as root.
If your system has EFI Secure Boot enabled you may also need to sign the kernel modules (vboxdrv, vboxnetflt, vboxnetadp, vboxpci) before you can load them. Please see your Linux system's documentation for more information.
where: suplibOsInit what: 3 VERR_VM_DRIVER_NOT_INSTALLED (-1908) - The support driver is not installed. On Linux, open returned ENOENT
Commands from other topics don't work:
sudo dnf reinstall kernel-devel kernel-headers dkms qt5-qtx11extras elfutils-libelf-devel zlib-devel
systemctl restart vboxdrv
sudo dnf reinstall VirtualBox-6.1
sudo /sbin/vboxconfig
What do I need to do? Thanks
Please try:
$ sudo dnf -y install #development-tools
$ sudo dnf install kernel-headers kernel-devel dkms -y
The problem maybe it is that the kernels have different versions on devel and headers. You should probably check this right before everything else.
Now if you want to create a virtual machine based on Linux, I strongly recommend you to use "KVM", it's the easiest way and it should work without any trouble.
This is related: rc-1908
you just need to install the "linux-devel" packages (worked in fedora 37)
sudo dnf install linux-devel
Related
I am trying to follow the NVIDIA Driver Installation Quickstart Guide:
https://docs.nvidia.com/datacenter/tesla/tesla-installation-notes/index.html
The first instruction says:
The kernel headers and development packages for the currently running
kernel can be installed with:$ sudo apt-get install linux-headers-$(uname -r)
When I try this I get the error:
Unable to locate package linux-headers-4.9.140-tegra
Couldn't find any package by glob 'linux-headers-4.9.140-tegra'
Couldn't find any package by regex 'linux-headers-4.9.140-tegra'
I'm not sure how to proceed.
Your version of Ubuntu is running a tegra kernel. The headers for this kernel are not in the Ubuntu repositories (or any other repositories you may have enabled). You will probably need to these before proceeding with the driver installation.
However. NVIDIA Tegra is a small SoC (system on chip) processor AFAIK. Like a Jetson Nano or something. The instructions you linked are for NVIDIA Tesla GPUs which are data center GPUs. Again, AFAIK. Check you are following the right instructions. Also, in those instructions, look at: 'Section 1.1 - Pre-installation requirements', and this pre install checklist.
Here is a list of all the different kernel headers in the Ubuntu 20.04 repos (not the same I know). tegra is not there.
Before you can install the appropriate kernel headers, update your packages index. First use the update command.
sudo apt-get update
then run sudo apt-get install linux-headers-$(uname -r) again. If this doesn't work, try out
sudo apt-get install linux-headers-generic
which should install the right version.
I need kernel version 3.19 on my CentOS 7, currently is it 3.10.
I know that following steps can be used to update kernel version to the stable latest one.
sudo rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
sudo rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm
INSTALLATION
sudo yum --enablerepo=elrepo-kernel install kernel-lt
sudo yum --enablerepo=elrepo-kernel install kernel-ml
sudo reboot
But how can I install 3.19 version of kernel ? When I list yum list --showduplicates kernel from repositories at my system, I can see only 3.10. but nothing more.
Why you would you like to use an old kernel when there are already updated kernels available? I have followed the instruction to install latest kernel
The NVIDIA-SMI is throwing this error:
NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA
driver. Make sure that the latest NVIDIA driver is installed and
running
I purged NVIDIA and installed it again following steps mentioned here.
My device specs are as follows:
Server with a Tesla M40
Running on Ubuntu 16.04
Kernel version Linux 4.4.0-116-generic x86_64
Driver: nvidia-384
Can someone please help in solving the error?
The issue might due to a confirmed "bug" in 4.4.0-116 patch. I ran into the same issue with nvidia-390. If you still want to use a newer version of Nvidia-driver, I followed the instructions here and managed to solve the problem. In general, use the following steps:
If you cannot login to the desktop and fall into to the fail-loop, press ctrl + alt + F1 to login into the command line mode.
Check if the version of gcc is outdated, if so, update it: gcc --version
If the gcc version is 5+, uninstall the nvidia driver first: sudo apt-get remove nvidia-390
Purge the 4.4.0-116 kernel: sudo apt-get purge linux-headers-4.4.0-116 linux-headers-4.4.0-116-generic linux-image-4.4.0-116-generic linux-image-extra-4.4.0-116-generic linux-signed-image-4.4.0-116-generic
Reinstall the kernel: sudo apt-get install linux-generic linux-signed-generic
Reinstall the nvidia-390: sudo apt-get install nvidia-390
Check if the problem is solved by modinfo nvidia-390 -k 4.4.0-116-generic | grep vermagic, make sure retpoline shows up this time
Reboot: sudo reboot
Hope this works for you and other people who run into the same issue. The post in the forum saved my weekend.
Note: this answer is from 2018 and works for Ubuntu 16.04, which is very much out-of-date. Don't try this on recent Ubuntu versions.
Try
Download the driver from here
sudo apt-get purge nvidia* - To remove your current installations
dpkg -i nvidia-diag-driver-local-repo-ubuntu1604_375.66-1_amd64.deb - installing what you downloaded earlier
sudo apt-get update
sudo apt-get install cuda-drivers
After this, go on and reboot your computer.
When it's up again, the nvidia-smi command should run smoothly
to download latest driver as of this answer:
sudo apt install libnvidia-compute-435 libnvidia-compute-435
sudo apt install libnvidia-gl-435 nvidia-dkms-435 nvidia-kernel-source-435
nvidia-utils-435 xserver-xorg-video-nvidia-435 libnvidia-ifr1-435
sudo apt install nvidia-driver-435
sudo reboot
and then:
nvidia-smi
If you're running this on Google Colab, just go to Runtime > Change Runtime Type > select GPU. That worked for me.
First of all, all of this is done as root. I've been trying to install the CUDA 7.5 drivers on a CentOS 7 SATA DOM. The issue I'm running into is the following:
Installing the NVIDIA display driver...
The driver installation is unable to locate the kernel source. Please make sure that the kernel source packages are installed and set up correctly.
If you know that the kernel source packages are installed and set up correctly, you may pass the location of the kernel source with the '--kernel-source-path' flag.
I have tried to point to the kernel source path (I may be pointing to the wrong path; I'm a new Linux user) with the following command:
$ ./cuda_7.5.18_linux.run --kernel-source-path=/usr/src/kernels/3.10.0-327.18.2.el7.x86_64
Same issue as before. I've read online that other people with this issue is due to kernel version mismatch. That, however is not the case:
$ uname -r
3.10.0-327.18.2.el7.x86_64
$ rpm -q kernel-devel kernel-headers
kernel-devel-3.10.0-327.18.2.el7.x86_64
kernel-headers-3.10.0-327.18.2.el7.x86_64
$ ls /usr/src/kernels
3.10.0-327.18.2.el7.x86_64
$ ls /usr/src/kernels/3.10.0-327.18.2.el7.x86_64/
arch block crypto drivers firmware fs include init ipc Kconfig kernel lib Makefile mm Module.symvers net samples scripts security sound System.map tools usr virt vmlinux.id
I've also tried to install different versions of gcc and still no dice.
Any help would be appreciated.
Thanks.
I figure it out. It turns out I needed to install DKMS from the EPEL repository. Here are the commands I used:
sudo yum install epel-release
yum install --enablerepo=epel dkms
I installed Ubuntu 11.10, installed GNOME 3 (replaced Unity), installed Eclipse from the Ubuntu Software Center, installed the android sdk and ADT.
Now when I start eclipse I get a message saying:
Failed to get ADB version : Cannot run program
/home/ayush/android-sdk/platform-tools/adb":java.io.IOException:error=2,
No such file or directory
What is causing this error and how do I fix it?
The command to install IA32 libraries on Ubuntu is:
apt-get install ia32-libs
sudo dpkg --add-architecture i386
sudo apt-get update
apt-get install ia32-libs
Before that please check your ubuntu version. if you are running with 64 bits, you need to install a linux emulator, IA32 bit I thinks. Verify on Google.
after that, your ADB can run easily on ubuntu.
I'm using Fedora 17 and I got the same error as the poster:
[2013-08-29 21:44:08 - adb] Unexpected exception 'Cannot run program
"/home/el/adt-bundle-linux-x86_64-20130729/sdk/platform-tools/adb":
error=2, No such file or directory' while attempting to get adb version from
'/home/el/adt-bundle-linux-x86_64-20130729/sdk/platform-tools/adb'
I know this works if you are using Fedora 17/18 (login as root)
yum install redhat-lsb.i686
And then restart the IDE and the errors no longer show.
I had the exact same error as you had, but on my Ubuntu 12.04 LTS version.
The following avoided that error for me:
1) Install 'adb' and 'fastboot' provided by the following third-party PPA.
sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt-get update
sudo apt-get install android-tools-adb android-tools-fastboot
2) Replace the copy of 'adb' and 'fastboot' provided by the official Android SDK with those installed from the above step:
cp /usr/bin/adb <path-to-your-adt-sdk-package>/sdk/platform-tools/adb
cp /usr/bin/fastboot <path-to-your-adt-sdk-package>/sdk/platform-tools/fastboot
3) Restart(re-execute) your eclipse binary.
Full credits:
http://www.webupd8.org/2012/08/install-adb-and-fastboot-android-tools.html
They have the binaries for 12.10, 11.10 and 11.04 as well.
Don't try to install ia32-libs, this library has been obsoleted.
So, you should install these libraries:
sudo apt-get install libc6-i386 lib32stdc++6 lib32gcc1 lib32ncurses5
Cheers