I am kinda new to docker and as for my first project I wanted to try and start a searXNG instance on tor. There have been many people who have accomplished that, yet I cannot figure out whats wrong.
I've installed tor, searxng-docker and docker-compose on my raspberry pi (it is running raspberry pi os lite), got the .onion hostname and put it in .env and then, I got the instance running. But when I checked the link, it gave me a 404.
Can anyone help? I would really appreciate that.
The output of sudo docker ps:
The .env file (I've hide my email:
Do you want your server to be only available on Tor as a hidden service?
This is not supported out of the box.
Here some information that should help:
Add http:// in front of your server name in .env: SEARXNG_HOSTNAME=http://gpfo...onion
In Caddyfile, add bind 127.0.0.1 just before line 10 (tls {$SEARXNG_TLS}).
In torrc, but sure to have HiddenServicePort 80 127.0.0.1:80 in addition to HiddenServiceDir.
Related
I have a relatively crude linux machine, with a setup that enables me to use my RPI through it since it's wifi doesn't work.
The RPI's ip is 10.42.0.206 and I can ssh to it just fine through the machine. But I want to also be able to access it on other devices, one thing I though was to forward 10.42.0.206:22 to something like 192.168.1.13:5022 (the ubuntu's ip) but I can't figure it out to make it work, could someone please help?
Do I make a proxy or something, idk...
Turns out I was right about the proxy part. For anyone that needs it, here's the answer:
Install simpleproxy: sudo apt-get install simpleproxy
Run it: simpleproxy -L 5022 -R 10.42.0.206:22
replace the port 5022 with your port or use ip:port and replace 10.42.0.206:22 with your internal ip:port
I installed apache2 on ubuntu and I want to check that it works by accessing http://localhost/. The problem is I installed ubuntu(17.04) server, so there is no web browser, only the command line.
What can I do?
curl localhost (curl localhost:8080 if it's not port 80)
or
curl 127.0.0.1
or just test with
ping localhost
or download your index.html or something
wget localhost
I recommend installing a browser for a command line like lynx ,Browsh.
Lynx is light-weight. Fast. An img element is always shown in their alt text.
Browsh is a bit slower than Lynx. An img element is always shown ing(but as low quality as your command line can display).
I use different above depending on the purpose.
If you just want to see the localhost is working well, use lynx.
If you want to check your server working well and see details, use Browsh.
I hope my answer will help you. Any questions, google or ask me.
You can also port forward it...
You can use ngrok service(just google it) and you can port forward your local host and open it on your own web browser. . . even on your phone..
./ngrok http 80
I think this should work and give you temporary address
I installed nodejs and created a sample app. When I run npm start I get a message saying that I can open my web browser to http://localhost:3000 to see the app in action, but this installation is on a web server - not my local computer, so, instead of localhost:3000 I want to get there using something like mydomain.com:3000
I can't find the answer, it's very likely I just don't know how to search for it... any ideas?
I'm following the tutorial here: https://facebook.github.io/react/tutorial/tutorial.html
I think I only needed to get away from this for a while. I got it working using ssh local forwarding.
I already used an ssh config file to log in to my server without having to remember the password, so I just added this line to my config file:
LocalForward localhost:3000 xxx.xxx.xxx.xxx:3000
where xxx.xxx.xxx.xxx is my server IP address.
Then, I connected to my server via ssh:
ssh -f -N mysite
Once connected, I open up the browser and go to localhost:3000 and there it is now.
I used my ssh config file, but it should also work without it.
ssh -f -N -R 3000:localhost:3000 mydomain.com
I found this command that eventually led me to solve my problem in this link: http://stuff-things.net/2016/01/20/tunneling-to-localhost/
Hi guys im newbie in vps... I've bought an ovh not managed vps . I like to face problems... But I don't find any documents to these one. Is simple like I said I want to run a nodejs app in centos vps environment but I have enabled plesk.. and I saw in console running the app with the trace but I try to open website with the port and doesn't find anything.
http://vps406315.ovh.net
Thx for all guys
-----------------EDIT-------------------
I'm going to explain better,sorry for previous post.
There is no error, in my console all is ok. Like I said i have an CentOS VPS. Steps that I did:
Connect with PUTTY
Go to folder where is the NodeJS project.
I set the port to 8080
Write node index.js
The app is running and writing the right trace.
I use chrome to check the ip, and show me the default plesk page.
I use wget to check it, and with only http://92.222.71.137/. I attach
an screenshot
I tried to use with the port 8080 with the chrome and wget in putty,
and the response was the same.
In the other hand if I use http://92.222.71.137:8080/login with putty
download the right login.html, and the nodejs app write a trace
indicate me that someone connect to that page. But if I access with
chrome is not working.
Now I would like no know how to make access frome Chrome.
Thx 4 all and sorry for my newbie knowledge
You should give some other details on the configuration or eventual errors you get (both on the browser and the VPS) and how you run the node app (behind a web server, for example)
If you are not running you node app behind a web server, are the node app listening on the correct interface ? 127.0.0.1 and 92.222.71.137 (your site external address) are not the same.
On your VPS you can try to call the node app from the VPS itself using wget or cURL and looking for what happen in the app trace.
Finally it was easy... only i had to open a port to use with TCP, using
iptables -I INPUT -p tcp --dport 8856 --syn -j ACCEPT –
I need to run a simple http-server using nodejs. I have installed in my local repo using npm. When i run the below command, i am getting th e following message
nodejs node-modules/http-server/bin/http-server -a 127.0.0.0
Starting up http-server, serving ./ on: http://127.0.0.0:8080
But, server is not running on http://127.0.0.0:8080. All i could see in the screen is, The webpage is not available
If i change the command as,
nodejs node-modules/http-server/bin/http-server -a 127.0.0.1
it starts a local server at http://127.0.0.1:8080
I do not understand what is going on. Could any body help me to understand what's happening here?
Thanks in ADVANCE!!
127.0.0.0 is not a valid address.
See this article.
First of all take a look at this question, which tells you why, while an address ending in .0 is perfectly valid, you should avoid using it (hint: legacy reasons).
Then again, node is explicitly telling you where the server is being started, you posted it in your question:
Starting up http-server, serving ./ on: ---> http://127.0.0.1:8080 <---
Even more to the point, 127.0.0.0 is not a loopback address, but a generic (potentially assignable) network address. 127.0.0.1, on the other hand, is a loopback address, which means it's assigned to your machine and it's accessible from your machine only. Take a look at this Wikipedia article.
So what can you do? Just run your application on 127.0.0.1, since you can't (and shouldn't probably) run it on 127.0.0.0.