I'm a novice Assembly x86 Learner, and i want to add two numbers (5+5) and print the result on the screen.
here is my code:
global _start
section .text
_start:
mov eax, 5
mov ebx, 5
add eax, ebx
push eax
mov eax, 4 ; call the write syscall
mov ebx, 1 ; STDOUT
pop ecx ; Result
mov edx, 0x1
int 0x80
; Exit
mov eax, 0x1
xor ebx, ebx
int 0x80
Correct me please
Another approach to convert an unsigned integer to a string and write it:
section .text
global _start
_start:
mov eax, 1234567890
mov ebx, 5
add eax, ebx
; Convert EAX to ASCII and store it onto the stack
sub esp, 16 ; reserve space on the stack
mov ecx, 10
mov ebx, 16
.L1:
xor edx, edx ; Don't forget it!
div ecx ; Extract the last decimal digit
or dl, 0x30 ; Convert remainder to ASCII
sub ebx, 1
mov [esp+ebx], dl ; Store remainder on the stack (reverse order)
test eax, eax ; Until there is nothing left to divide
jnz .L1
mov eax, 4 ; SYS_WRITE
lea ecx, [esp+ebx] ; Pointer to the first ASCII digit
mov edx, 16
sub edx, ebx ; Count of digits
mov ebx, 1 ; STDOUT
int 0x80 ; Call 32-bit Linux
add esp, 16 ; Restore the stack
mov eax, 1 ; SYS_EXIT
xor ebx, ebx ; Return value
int 0x80 ; Call 32-bit Linux
Related
I'm trying to learn the basics of assembly but can't get across on how to display results stored in memory.
section .data
num1 db 1,2,3,4,5
num2 db 1,2,3,4,5
output: db 'The dot product is "'
outputLen1 : equ $-output
output2: db '" in Hex!', 10
output2Len : equ $-output2
section .bss
dotProd resw 1 ; store dot product in here
section .text
global _start
_start:
mov eax, 0
mov ecx, 5
mov edi, 0
mov esi, 0
looper: mov ax, [edi + num1]
mov dx, [esi + num2]
mul dx
add [dotProd], ax
cmp cx, 1
je printOutput
inc edi
inc esi
dec cx
jmp looper ; go back to looper
printOutput:
mov eax,4 ; The system call for write (sys_write)
mov ebx,1 ; File descriptor 1 - standard output
mov ecx, output ;
mov edx, outputLen1 ;
int 80h ; Call the kernel
mov eax, 4
mov ebx, 1
mov ecx, dotProd,
mov edx, 1
int 80h
mov eax, 4
mov ebx, 1
mov ecx, output2,
mov edx, output2Len
int 80h
jmp done
done:
mov eax,1 ; The system call for exit (sys_exit)
mov ebx,0 ; Exit with return code of 0 (no error)
int 80h
What I'm trying to do is get the dot product of the two list of numbers and display it on the screen. However, I keep getting random letters which I believe are hex representations of the real decimal value. How can I convert it to decimal? The current value display is 7, which should is the equivalent ASCII char for 55, which in this case is the dot product of both list of numbers.
esi and edi must be increased such that it points to next element of array.(in this particular example, only one of them is sufficient).
declare mun1 andnum2 as dd, instead of db (see here).
Also, you have to have method for printing number.(see this and this).
Below is a complete code which uses printf.
;file_name:test.asm
;assemble and link with:
;nasm -f elf test.asm && gcc -m32 -o test test.o
extern printf
%macro push_reg 0
push eax
push ebx
push ecx
push edx
%endmacro
%macro pop_reg 0
pop edx
pop ecx
pop ebx
pop eax
%endmacro
section .data
num1: dd 1,2,3,4,5
num2: dd 1,2,3,4,5
msg: db "Dot product is %d",10,0
section .bss
dotProd resd 1 ; store dot product in here
section .text
global main
main:
mov eax, 0
mov ecx, 5
mov edx, 0
mov esi, 0
mov dword[dotProd], 0h
looper: mov eax, dword[esi + num1]
mov edx, dword[esi + num2]
mul edx
add [dotProd], eax
cmp cx, 1
je printOutput
add esi,4
dec cx
jmp looper ; go back to looper
printOutput:
push_reg
push dword[dotProd]
push dword msg
call printf
add esp,8
pop_reg
jmp done
done:
mov eax,1 ; The system call for exit (sys_exit)
mov ebx,0 ; Exit with return code of 0 (no error)
int 80h
How do I write a variable to a file using NASM?
For example, if I execute some mathematical operation - how do I write the result of the operation to write a file?
My file results have remained empty.
My code:
%include "io.inc"
section .bss
result db 2
section .data
filename db "Downloads/output.txt", 0
section .text
global CMAIN
CMAIN:
mov eax,5
add eax,17
mov [result],eax
PRINT_DEC 2,[result]
jmp write
write:
mov EAX, 8
mov EBX, filename
mov ECX, 0700
int 0x80
mov EBX, EAX
mov EAX, 4
mov ECX, [result]
int 0x80
mov EAX, 6
int 0x80
mov eax, 1
int 0x80
jmp exit
exit:
xor eax, eax
ret
You have to implement ito (integer to ascii) subsequently len for this manner. This code tested and works properly in Ubuntu.
section .bss
answer resb 64
section .data
filename db "./output.txt", 0
section .text
global main
main:
mov eax,5
add eax,44412
push eax ; Push the new calculated number onto the stack
call itoa
mov EAX, 8
mov EBX, filename
mov ECX, 0x0700
int 0x80
push answer
call len
mov EBX, EAX
mov EAX, 4
mov ECX, answer
movzx EDX, di ; move with extended zero edi. length of the string
int 0x80
mov EAX, 6
int 0x80
mov eax, 1
int 0x80
jmp exit
exit:
xor eax, eax
ret
itoa:
; Recursive function. This is going to convert the integer to the character.
push ebp ; Setup a new stack frame
mov ebp, esp
push eax ; Save the registers
push ebx
push ecx
push edx
mov eax, [ebp + 8] ; eax is going to contain the integer
mov ebx, dword 10 ; This is our "stop" value as well as our value to divide with
mov ecx, answer ; Put a pointer to answer into ecx
push ebx ; Push ebx on the field for our "stop" value
itoa_loop:
cmp eax, ebx ; Compare eax, and ebx
jl itoa_unroll ; Jump if eax is less than ebx (which is 10)
xor edx, edx ; Clear edx
div ebx ; Divide by ebx (10)
push edx ; Push the remainder onto the stack
jmp itoa_loop ; Jump back to the top of the loop
itoa_unroll:
add al, 0x30 ; Add 0x30 to the bottom part of eax to make it an ASCII char
mov [ecx], byte al ; Move the ASCII char into the memory references by ecx
inc ecx ; Increment ecx
pop eax ; Pop the next variable from the stack
cmp eax, ebx ; Compare if eax is ebx
jne itoa_unroll ; If they are not equal, we jump back to the unroll loop
; else we are done, and we execute the next few commands
mov [ecx], byte 0xa ; Add a newline character to the end of the character array
inc ecx ; Increment ecx
mov [ecx], byte 0 ; Add a null byte to ecx, so that when we pass it to our
; len function it will properly give us a length
pop edx ; Restore registers
pop ecx
pop ebx
pop eax
mov esp, ebp
pop ebp
ret
len:
; Returns the length of a string. The string has to be null terminated. Otherwise this function
; will fail miserably.
; Upon return. edi will contain the length of the string.
push ebp ; Save the previous stack pointer. We restore it on return
mov ebp, esp ; We setup a new stack frame
push eax ; Save registers we are going to use. edi returns the length of the string
push ecx
mov ecx, [ebp + 8] ; Move the pointer to eax; we want an offset of one, to jump over the return address
mov edi, 0 ; Set the counter to 0. We are going to increment this each loop
len_loop: ; Just a quick label to jump to
movzx eax, byte [ecx + edi] ; Move the character to eax.
movsx eax, al ; Move al to eax. al is part of eax.
inc di ; Increase di.
cmp eax, 0 ; Compare eax to 0.
jnz len_loop ; If it is not zero, we jump back to len_loop and repeat.
dec di ; Remove one from the count
pop ecx ; Restore registers
pop eax
mov esp, ebp ; Set esp back to what ebp used to be.
pop ebp ; Restore the stack frame
ret ; Return to caller
this is my code :
section .bss ;Uninitialized data
average resb 5
num1 resb 5
num2 resb 5
num3 resb 5
section .text
global _start ; make the main function externally visible
_start:
;User prompt
mov eax, 4
mov ebx, 1
mov ecx, messaging
mov edx, lenmessaging
int 0x80
;Read and store the user input
mov eax, 3
mov ebx, 0
mov ecx, num1
mov edx, 5 ;5 bytes (numeric, 1 for sign) of that information
int 0x80
mov eax, 4
mov ebx, 1
mov ecx, messaging
mov edx, lenmessaging
int 0x80
;Read and store the user input
mov eax, 3
mov ebx, 0
mov ecx, num2
mov edx, 5 ;5 bytes (numeric, 1 for sign) of that information
int 0x80
mov eax, 4
mov ebx, 1
mov ecx, userMsg
mov edx, lenUserMsg
int 0x80
;Read and store the user input
mov eax, 3
mov ebx, 0
mov ecx, num3
mov edx, 5 ;5 bytes (numeric, 1 for sign) of that information
int 0x80
;Output the message
mov eax, 4
mov ebx, 1
mov ecx, dispMsg
mov edx, lenDispMsg
int 0x80
; moving the first number to eax register and second number to ebx
; and subtracting ascii '0' to convert it into a decimal number
mov eax, [num1]
sub eax, '0'
mov ebx, [num2]
sub ebx, '0'
; add eax and ebx
add eax, ebx
mov ebx, [num3]
sub ebx, '0'
add eax, ebx
mov bl, '3'
sub bl, '0'
div bl
add eax, '0'
mov [average], eax
;Output the number entered
mov eax, 4
mov ebx, 1
mov ecx, average
mov edx, 5
int 0x80
;////////////////
mov eax, 0x1 ; system call number for exit
sub esp, 4 ; OS X (and BSD) system calls needs "extra space" on stack
int 0x80 ; make the system call
section .data ;Data segment
userMsg db 'Please enter a number: ' ;Ask the user to enter a nu
lenUserMsg equ $-userMsg ;The length of the message
dispMsg db 'The average is : '
lenDispMsg equ $-dispMsg
messaging db 'Enter another number : '
lenmessaging equ $-messaging
when I run it ,I have this error :
how can I fix it?
this program is for calculating the average of three numbers.
thanks ;)
Currently I'm trying to loop over every single byte in a buffer (read from a file) and compare it to see if any of them is a whitespace, and write them to STDOUT. For some reason the program compiles and runs fine, but produces zero output.
section .data
bufsize dw 1024
section .bss
buf resb 1024
section .text
global _start
_start:
; open the file provided form cli in read mode
mov edi, 0
pop ebx
pop ebx
pop ebx
mov eax, 5
mov ecx, 0
int 80h
; write the contents in to the buffer 'buf'
mov eax, 3
mov ebx, eax
mov ecx, buf
mov edx, bufsize
int 80h
; write the value at buf+edi to STDOUT
mov eax, 4
mov ebx, 1
mov ecx, [buf+edi]
mov edx, 1
int 80h
; if not equal to whitespace, jump to the loop
cmp byte [buf+edi], 0x20
jne loop
loop:
; increment the loop counter
add edi, 1
mov eax, 4
mov ebx, 1
mov ecx, [buf+edi]
int 80h
; compare the value at buf+edi with the HEX for whitespace
cmp byte [buf+edi], 0x20
jne loop
; exit the program
mov eax, 1
mov ebx, 0
int 80h
The main problem was that I didn't given the address of bufsize ([bufsize]), also the loops had some problems.
Here's the fixed version, thanks everyone for your input.
section .data
bufsize dd 1024
section .bss
buf: resb 1024
section .text
global _start
_start:
; open the file provided form cli in read mode
mov edi, 0
pop ebx
pop ebx
pop ebx
mov eax, 5
mov ecx, 0
int 80h
; write the contents in to the buffer 'buf'
mov eax, 3
mov ebx, eax
mov ecx, buf
mov edx, [bufsize]
int 80h
; write the value at buf+edi to STDOUT
; if equal to whitespace, done
loop:
cmp byte [buf+edi], 0x20
je done
mov eax, 4
mov ebx, 1
lea ecx, [buf+edi]
mov edx, 1
int 80h
; increment the loop counter
add edi, 1
jmp loop
done:
; exit the program
mov eax, 1
mov ebx, 0
int 80h
I am trying to print a single digit integer in nasm assembly on linux. What I currently have compiles fine, but nothing is being written to the screen. Can anyone explain to me what I am doing wrong here?
section .text
global _start
_start:
mov ecx, 1 ; stores 1 in rcx
add edx, ecx ; stores ecx in edx
add edx, 30h ; gets the ascii value in edx
mov ecx, edx ; ascii value is now in ecx
jmp write ; jumps to write
write:
mov eax, ecx ; moves ecx to eax for writing
mov eax, 4 ; sys call for write
mov ebx, 1 ; stdout
int 80h ; call kernel
mov eax,1 ; system exit
mov ebx,0 ; exit 0
int 80h ; call the kernel again
This is adding, not storing:
add edx, ecx ; stores ecx in edx
This copies ecx to eax and then overwrites it with 4:
mov eax, ecx ; moves ecx to eax for writing
mov eax, 4 ; sys call for write
EDIT:
For a 'write' system call:
eax = 4
ebx = file descriptor (1 = screen)
ecx = address of string
edx = length of string
After reviewing the other two answers this is what I finally came up with.
sys_exit equ 1
sys_write equ 4
stdout equ 1
section .bss
outputBuffer resb 4
section .text
global _start
_start:
mov ecx, 1 ; Number 1
add ecx, 0x30 ; Add 30 hex for ascii
mov [outputBuffer], ecx ; Save number in buffer
mov ecx, outputBuffer ; Store address of outputBuffer in ecx
mov eax, sys_write ; sys_write
mov ebx, stdout ; to STDOUT
mov edx, 1 ; length = one byte
int 0x80 ; Call the kernel
mov eax, sys_exit ; system exit
mov ebx, 0 ; exit 0
int 0x80 ; call the kernel again
From man 2 write
ssize_t write(int fd, const void *buf, size_t count);
In addition to the other errors that have been pointed out, write() takes a pointer to the data and a length, not an actual byte itself in a register as you are trying to provide.
So you will have to store your data from a register to memory and use that address (or if it's constant as it currently is, don't load the data into a register but load its address instead).