I am trying to print a single digit integer in nasm assembly on linux. What I currently have compiles fine, but nothing is being written to the screen. Can anyone explain to me what I am doing wrong here?
section .text
global _start
_start:
mov ecx, 1 ; stores 1 in rcx
add edx, ecx ; stores ecx in edx
add edx, 30h ; gets the ascii value in edx
mov ecx, edx ; ascii value is now in ecx
jmp write ; jumps to write
write:
mov eax, ecx ; moves ecx to eax for writing
mov eax, 4 ; sys call for write
mov ebx, 1 ; stdout
int 80h ; call kernel
mov eax,1 ; system exit
mov ebx,0 ; exit 0
int 80h ; call the kernel again
This is adding, not storing:
add edx, ecx ; stores ecx in edx
This copies ecx to eax and then overwrites it with 4:
mov eax, ecx ; moves ecx to eax for writing
mov eax, 4 ; sys call for write
EDIT:
For a 'write' system call:
eax = 4
ebx = file descriptor (1 = screen)
ecx = address of string
edx = length of string
After reviewing the other two answers this is what I finally came up with.
sys_exit equ 1
sys_write equ 4
stdout equ 1
section .bss
outputBuffer resb 4
section .text
global _start
_start:
mov ecx, 1 ; Number 1
add ecx, 0x30 ; Add 30 hex for ascii
mov [outputBuffer], ecx ; Save number in buffer
mov ecx, outputBuffer ; Store address of outputBuffer in ecx
mov eax, sys_write ; sys_write
mov ebx, stdout ; to STDOUT
mov edx, 1 ; length = one byte
int 0x80 ; Call the kernel
mov eax, sys_exit ; system exit
mov ebx, 0 ; exit 0
int 0x80 ; call the kernel again
From man 2 write
ssize_t write(int fd, const void *buf, size_t count);
In addition to the other errors that have been pointed out, write() takes a pointer to the data and a length, not an actual byte itself in a register as you are trying to provide.
So you will have to store your data from a register to memory and use that address (or if it's constant as it currently is, don't load the data into a register but load its address instead).
Related
I'm a novice Assembly x86 Learner, and i want to add two numbers (5+5) and print the result on the screen.
here is my code:
global _start
section .text
_start:
mov eax, 5
mov ebx, 5
add eax, ebx
push eax
mov eax, 4 ; call the write syscall
mov ebx, 1 ; STDOUT
pop ecx ; Result
mov edx, 0x1
int 0x80
; Exit
mov eax, 0x1
xor ebx, ebx
int 0x80
Correct me please
Another approach to convert an unsigned integer to a string and write it:
section .text
global _start
_start:
mov eax, 1234567890
mov ebx, 5
add eax, ebx
; Convert EAX to ASCII and store it onto the stack
sub esp, 16 ; reserve space on the stack
mov ecx, 10
mov ebx, 16
.L1:
xor edx, edx ; Don't forget it!
div ecx ; Extract the last decimal digit
or dl, 0x30 ; Convert remainder to ASCII
sub ebx, 1
mov [esp+ebx], dl ; Store remainder on the stack (reverse order)
test eax, eax ; Until there is nothing left to divide
jnz .L1
mov eax, 4 ; SYS_WRITE
lea ecx, [esp+ebx] ; Pointer to the first ASCII digit
mov edx, 16
sub edx, ebx ; Count of digits
mov ebx, 1 ; STDOUT
int 0x80 ; Call 32-bit Linux
add esp, 16 ; Restore the stack
mov eax, 1 ; SYS_EXIT
xor ebx, ebx ; Return value
int 0x80 ; Call 32-bit Linux
This question already has answers here:
X86 NASM Assembly converting lower to upper and upper to lowercase characters
(5 answers)
X86 Assembly Converting lower-case to uppercase
(1 answer)
Closed 3 years ago.
I want to change the string to all caps, although I am having trouble getting the length of the input. What i have tried so far is moving the address of the message into a registrar then indexing through the string and also increment a counter variable. Then comparing the char in the address to a '.' (signifying the end of the message) and if its found not to be equal it will recall this block of statements. At least this is what I want my code to do. Not sure if this is even the right logic. I know there are alot of errors and its messy but I'm learning so please just focus on my main question. thank you! EDIT: the input i use is 'this is a TEST.'
;nasm 2.11.08
SYS_Write equ 4
SYS_Read equ 3
STDIN equ 0
STDOUT equ 1
section .bss
message resb 15
counter resb 2
section .data
msg1: db 'Enter input (with a period) that I will turn into all capitals!',0xa ;msg for input
len1 equ $- msg1
section .text
global _start
_start:
mov eax, SYS_Write ; The system call for write (sys_write)
mov ebx, STDOUT ; File descriptor 1 - standard output
mov ecx, msg1 ; msg to print
mov edx, len1 ; len of message
int 0x80 ; Call the kernel
mov eax, SYS_Read ;system call to read input
mov ebx, STDIN ;file descriptor
mov ecx, message ;variable for input
mov edx, 15 ;size of message
int 0x80 ;kernel call
mov [counter], byte '0'
getLen:
mov eax, message
add eax, [counter]
inc byte [counter]
cmp eax, '.'
jne getLen
mov eax, SYS_Write ; this is to print the counter to make sure it got the right len
mov ebx, STDOUT
mov ecx, counter
mov edx, 2
int 0x80
jmp end
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
mov eax, [message]
;add eax, counter
cmp eax, 90
jg toUpper
toUpper:
sub eax, 32
mov [message], eax
mov eax, SYS_Write ; The system call for write (sys_write)
mov ebx, STDOUT ; File descriptor 1 - standard output
mov ecx, message ; Put the offset of hello in ecx
mov edx, 10 ; helloLen is a constant, so we don't need to say
int 0x80 ; Call the kernel
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
end:
mov eax,1 ; The system call for exit (sys_exit)
mov ebx,0 ; Exit with return code of 0 (no error)
int 0x80 ;
I'm trying to get information about file permissions. I am using the sys_access system call. Here is my code snippet:
mov eax, 33
mov ebx, fileName
mov ecx, 1
int 80h
cmp eax, 0
jl .error
If eax is -1 there is an error, and I am not getting one, but I need to check all the permissions of the file (owner, group, others). How do I do that?
You can use the kernel function sys_newstat (No. 106 - look at this table) to get the file permissions. The structure stat is a never ending horror, but the following example works at least on my Debian Wheezy 64 bit (NASM, 32-bit and 64-bit modes):
SECTION .data
filename db '/root' ; Just an example, can be replaced with any name
filename_len equ $ - filename ; Length of filename
db 0 ; Terminator for `Int 80h / EAX = 106`
perm_out db 'Permissions: '
perm db 'drwxrwxrwx'
perm_len equ $ - perm ; Index of last character in `perm`
lf db 10
perm_out_len equ $ - perm_out ; Length of `Permissions: ...\n`
SECTION .bss
stat resb 256 ; Way too much, but size is variable depending on OS
SECTION .text
global _start
_start:
mov eax,4 ; sys-out
mov edx,filename_len ; length of string to print
mov ecx,filename ; Pointer to string
mov ebx,1 ; StdOut
int 0x80 ; Call kernel
mov eax,4 ; sys-out
mov edx,1 ; Length of string to print
mov ecx, lf ; Pointer to string
mov ebx,1 ; StdOut
int 0x80 ; Call kernel
mov eax, 106 ; sys_newstat
mov ebx, filename ; Pointer to ASCIIZ file-name
mov ecx, stat ; Pointer to structure stat
int 80h
test eax, eax
jz .noerr
mov eax,1 ; sys_exit
mov ebx,1 ; Exit code, 1=not normal
int 0x80 ; Call kernel
.noerr:
movzx eax, word [stat + 8] ; st_mode (/usr/include/asm/stat.h)
mov ebx, perm_len
; rwx bits
mov ecx, 9
.L1:
sub ebx, 1
shr eax, 1
jc .J1
mov byte [perm + ebx], '-'
.J1:
loop .L1
; directory bit
sub ebx, 1
shr eax, 6
jc .J2
mov byte [perm + ebx], '-'
.J2:
mov eax,4 ; sys-out
mov edx,perm_out_len ; Length of string to print
mov ecx,perm_out ; Pointer to string
mov ebx,1 ; StdOut
int 0x80 ; Call kernel
mov eax,1 ; sys_exit
mov ebx,0 ; Exit code, 0=normal
int 0x80 ; Call kernel
I'm trying to learn NASM. I want to write a procedure to get one character at a time from the console until a newline (0xA) is encountered using only kernel calls. So far I have
global _start
section .data
sys_read equ 3
sys_write equ 4
stdin equ 0
stdout equ 1
section .bss
line resb 11
index resb 4
section .text
_start:
push ebp
mov ebp, esp
call _readLine
afterReadLine:
call _printLine
mov esp, ebp
pop ebp
jmp exit
_readLine:
; Reads into line until new line (0xA)
; Number of bytes read will be stored in index when _readLine returns
mov eax, sys_read ; syscall to read
mov ebx, stdin ; stdin
mov edx, [index] ; put index into edx
mov ecx, dword line ; put line addr in ecx
add ecx, edx ; add index to addr in ecx
mov edx, 1 ; read one char
int 0x80 ; call kernel to read char
mov ecx, [index] ; put index into ecx
cmp dword [line + ecx], 0xA ; compare value at line + ecx to new line char
inc byte [index] ; increment index
je afterReadLine ; if last char is newline return
jne _readLine ; if last char is not new line, loop
_printLine:
mov eax, sys_write
mov ebx, stdout
mov ecx, line
mov edx, [index]
int 0x80
ret
exit:
mov eax, 01h ; exit()
xor ebx, ebx ; errno
int 80h
When I test against the value stored in the index variable at the end, it always equals 0. I tried moving the value of index into eax, but it's also zero after the jump. I tried using the ret keyword, but that also seemed to overwrite my values. What is the best practice way to return the value of characters read from this procedure?
EDIT:
I tried the following and I'm still not getting any output. With input "abcd[newline]" the program outputs "abcd" if I hardcode the value of 4 in edx in the _printLine procedure, but as written won't output anything.
global _start
section .data
sys_read equ 3
sys_write equ 4
stdin equ 0
stdout equ 1
bytesRead dd 0
termios: times 36 db 0
ICANON: equ 1<<1
ECHO: equ 1<<3
section .bss
line resb 11
index resb 4
section .text
_start:
push ebp
mov ebp, esp
call canonical_off
call echo_off
call _readLine
call _printLine
call canonical_on
call echo_on
mov esp, ebp
pop ebp
jmp exit
_readLine:
; Reads into line until new line (0xA)
; Number of bytes read will be stored in bytesRead when _readLine returns
mov eax, sys_read ; syscall to read
mov ebx, stdin ; stdin
mov edx, [index] ; put index into edx
mov ecx, dword line ; put line addr in ecx
add ecx, edx ; add index to addr in ecx
mov edx, 1 ; read one char
int 0x80 ; call kernel to read char
mov ecx, [index] ; put index into ecx
cmp dword [line + ecx], 0xA ; compare value at line + ecx to new line char
inc byte [index] ; increment index
jne _readLine ; if last char is not new line, loop
ret
_printLine:
mov eax, sys_write
mov ebx, stdout
mov ecx, line
mov edx, [index] ; Works if hardcoded 4 here!
int 0x80
ret
canonical_off:
call read_stdin_termios
; clear canonical bit in local mode flags
;push rax
mov eax, ICANON
not eax
and [termios+12], eax
;pop rax
call write_stdin_termios
ret
echo_off:
call read_stdin_termios
; clear echo bit in local mode flags
;push rax
mov eax, ECHO
not eax
and [termios+12], eax
;pop rax
call write_stdin_termios
ret
canonical_on:
call read_stdin_termios
; set canonical bit in local mode flags
or dword [termios+12], ICANON
call write_stdin_termios
ret
echo_on:
call read_stdin_termios
; set echo bit in local mode flags
or dword [termios+12], ECHO
call write_stdin_termios
ret
read_stdin_termios:
; push rax
; push rbx
; push rcx
;push rdx
mov eax, 36h
mov ebx, stdin
mov ecx, 5401h
mov edx, termios
int 80h
;pop rdx
; pop rcx
;pop rbx
;pop rax
ret
write_stdin_termios:
; push rax
;push rbx
;push rcx
; push rdx
mov eax, 36h
mov ebx, stdin
mov ecx, 5402h
mov edx, termios
int 80h
;pop rdx
;pop rcx
; pop rbx
;pop rax
ret
exit:
mov eax, 01h ; exit()
xor ebx, ebx ; errno
int 80h
link here http://ideone.com/Lw3fyV
First off, you are calling _readLine but not returning from it, instead you are jumping to the label after call _readLine conveniently called afterReadLine. You should use ret to exit from your function.
Now to your question. By default, the terminal is in canonical mode (Cooked mode), meaning all input is buffered. The system will fill your buffer until the return key is pressed and adds 0xA to the end of the buffer.
What you want is non-canonical mode (raw mode). This means the system does not process the key presses but passes it on to you.
How do i read single character input from keyboard using nasm (assembly) under ubuntu?
By switching to raw mode, you can get each character pressed until the return key and do what you will with it.
Currently I'm trying to loop over every single byte in a buffer (read from a file) and compare it to see if any of them is a whitespace, and write them to STDOUT. For some reason the program compiles and runs fine, but produces zero output.
section .data
bufsize dw 1024
section .bss
buf resb 1024
section .text
global _start
_start:
; open the file provided form cli in read mode
mov edi, 0
pop ebx
pop ebx
pop ebx
mov eax, 5
mov ecx, 0
int 80h
; write the contents in to the buffer 'buf'
mov eax, 3
mov ebx, eax
mov ecx, buf
mov edx, bufsize
int 80h
; write the value at buf+edi to STDOUT
mov eax, 4
mov ebx, 1
mov ecx, [buf+edi]
mov edx, 1
int 80h
; if not equal to whitespace, jump to the loop
cmp byte [buf+edi], 0x20
jne loop
loop:
; increment the loop counter
add edi, 1
mov eax, 4
mov ebx, 1
mov ecx, [buf+edi]
int 80h
; compare the value at buf+edi with the HEX for whitespace
cmp byte [buf+edi], 0x20
jne loop
; exit the program
mov eax, 1
mov ebx, 0
int 80h
The main problem was that I didn't given the address of bufsize ([bufsize]), also the loops had some problems.
Here's the fixed version, thanks everyone for your input.
section .data
bufsize dd 1024
section .bss
buf: resb 1024
section .text
global _start
_start:
; open the file provided form cli in read mode
mov edi, 0
pop ebx
pop ebx
pop ebx
mov eax, 5
mov ecx, 0
int 80h
; write the contents in to the buffer 'buf'
mov eax, 3
mov ebx, eax
mov ecx, buf
mov edx, [bufsize]
int 80h
; write the value at buf+edi to STDOUT
; if equal to whitespace, done
loop:
cmp byte [buf+edi], 0x20
je done
mov eax, 4
mov ebx, 1
lea ecx, [buf+edi]
mov edx, 1
int 80h
; increment the loop counter
add edi, 1
jmp loop
done:
; exit the program
mov eax, 1
mov ebx, 0
int 80h