I have the list of data that showing the Hours and the Minutes that I extract from the system. I need to be extract the hours.
As example below, column B first row, the Hours would be 64 and the minutes would be 46.
But when I used the formula =Hour , its turn up the different value since its actually decimal number.
Cannot use left() , it will give the actual decimal number.
Updated:
We tried the #harun24HR 's but cannot readable the value.
But if you noticed, if i copy and paste the value is different. thats why the search not applicable.
4th Update:
To Solar Mike, I have tried the formula given from the thread the i think the value not readable
It's a time value which Excel stores as calculated value based on 24 hours = 1.
To retrieve the hours only you can use:
=INT(A2*24)
To retrieve the minutes only you can use:
=(A1-(INT(A1*24)/24))*24*60
Your time value is already a number in time format so you just need it to change it to decimal system. Dates and time values are numbers. Even if you see it as 30/09/2019 or 12:00:00, actually, for Excel, both cases are numbers.
First date Excel can recognize properly is 01/01/1900 which integer numeric value is 1. Number 2 would be 02/01/1900 and so on. Actually, today is 44659.
Now, about your data, you posted this screenshoot:
So the value is numeric, not text/string. In Excel, what you see is not always what you have. Probably that column has been formatted using custom mask. My fake data is like this:
The numeric value is 02/01/1900 16:46:36 (or 02/01/1900 4:46:36 PM it depends on your regional settings) but I've applied a custom format like this:
[hh]" hours" mm " minutes"
So what I have is a number but what I see is a text!
We have to work with the number (to be honest, ist's easier to work with numbers), so to extract the total hours, minutes and seconds.
Formula in B1: =INT(A1*24) total hours
Formula in C1: =INT(A1*24*60-B1*60) total minutes
Formula in D1: =A1*24*60*60-B1*60*60-C1*60 total seconds
This should guide you on whatever are you trying to achieve.
From your current sample data you try-
For hour =LEFT(A2,SEARCH(" ",A2)-1)
For minutes =RIGHT(SUBSTITUTE(A2," minutes",""),2)
Related
I am completing a time study and recording time in excel. I have numbers like 2.24, etc.. I am trying to add them and average them and I am getting numbers like 9.76 when I really want 10m and 16seconds. Any thoughts to fixing this?
When I change the format to mm:ss it give me wild answers
If 9.76 is a decimal number and it's is in A1, then in B1 you can use:
=((A1-(ROUNDOWN(A1;0)))/0,6+(ROUNDOWN(A1;0)))/24
Also, format of cell with formula must be hours (I've used [hh]:mm:ss)
Applying this, I get:
I've done it in the following way: I used cell formatting, like u:mm:ss (in English locale, this might be h:mm:ss instead).
In one cell, I've put 0:2:24 (zero hours, two minutes, 24 seconds).
In the cell below, I've put 0:7:52.
Adding both cells (inside a cell with the mentioned cell formatting) yielded 0:10:16.
=9.76 value(minutes)
=24*60 number of minutes in a day
=A1/A2 formatted as time
Will show 12:09:46. You can use =MINUTE(A3) to extract the minutes and =SECOND(A3) for the seconds.
Actually if 9.76 means 9 minutes and 76 seconds, you'll need more formulas to extract the minutes and seconds then add them together. You can use =Floor() to get the integer. Subtract to find the .76 and multiply by 100 to get the number of seconds. Then divide by 60 to convert to minutes and add to the 9 whole mins. Now you have the number of mins which you can convert to a time value per the above.
EDIT:
You need to enter in Excel as 0:02:12 then you can add quite nicely. If you don't want to re-enter everything you can do this: =VALUE("0:"&SUBSTITUTE(A1,".",":")) then add. Be sure to convert each individual value BEFORE adding otherwise you might get incorrect results.
I am working on a project for my work and I am having an issue trying to take times and averaging them out. I am getting a #DIV/0! When I convert the cells to XX:XX.
Below are screen shots of the same data and function. The top is with regular numbers the bottom is where I formatted all cells to display in time XX:XX.
Numbers (works fine)
= AVERAGE(H29,J29,P29,V29,AE29,AJ29)
Time (XX:XX) however I get the #DIV/0!. The AVERAGE Function I am using looks like this:
=AVERAGE(H29,J29,P29,V29,AE29,AJ29)
Also, if possible, could I enter the data in regular numbers (not time) then have it display in average time (hours:min) on the right?.
Thank you.
When working in Excel with dates and times always leave the value as a number and apply formatting. where you have tried to enter a time in hh:mm, you need to show the hours even if they are blank, or the value of that cell becomes a string. But you can't average a string.
These are valid entries 00:23 or 0:23
:23 is not valid time, so is treated as a string
Valid times are stored as a number where 24 hours = 1.
Times are stored as a fraction for example 0:45 = 0.031250000
To fix it, add in the missing leading zeros, or if you have explicitly entered text strings: type a 1 in any cell and copy it, then select all of your time cells and do paste special multiply. That will convert them back to numbers and your average should work. Then apply your custom formatting of required .
I would suggest that users enter the time in minutes eg 17, 23, 92 and you average these, but for the conversion I suggest that you use a formula like this:
=AVERAGE(H29,J29,P29,V29,AE29,AJ29)/(24*60)
This will convert the average time in minutes, into a fraction of a day.
You can then put custom formatting onto the cell to change the format to hh:mm
How can I convert duration in excel to text ? I am having 1037:00:00 in a cell, which is the sum of certain durations. I want to extract 1037 alone. Excel returns "hours" when I try to extract with MID or use TEXT function.
If it is really the sum of some durations you can get the amount of hours by multiplying the cell by 24. The internal representation of a date or time cell is the number of days since beginning of the year 1900, so you have to multiply it by 24 to get the number of hours. (The year 1900 is not interesting for you as you just want a time span.) The Hour function does not work here because you get the day hour which is 5 in this case.
Be sure to format your target cell as regular number.
lets assume your cell with 1037:00:00 is in cell L40. You can use the following formula to pull the hours.
=INT(L40)*24+HOURS(L40)
Note this will only pull full hours rounded down. It does not take into account minutes or seconds.
Alternatives:
=Rounddown(L40*24,0)
This alternative is what Fratyx explained in his answer.
I have a data file imported where there is a column for the date. It is custom formatted as [-$409]ddmmmyyyy h:mm:ss:000 so that it takes a number like 41769.68 and has it shown in the cell as 10May2014 16:23:04.883, for instance.
I want to be able to take just the hour and use that for conditional formatting though. For example, if the hour is between 7AM and 11AM, I want another column to say 'morning', or something of that sort. I know I can change the format cells option to just 'h' to get the hour, but using that in another block of code still returns the original 41749.68 number rather than 16, for example.
Is there a way to get just the hour to show in its actual number form rather than the whole date, or if not, is there a way to parse the number 41769.68 to find the hour?
The hour is .68 (the decimal part) *24 (each day is 1 unit to Excel). If you don't want the minutes then either round or truncate (eg with INT). Either way Conditional Formatting will not allow you to format as 'morning'.
You could try:
=HOUR(A1)
With your value in A1, in another cell enter:
=INT(24*(A1-INT(A1)))
will display 16
I need to create and Excel table that computes daily training times. each row has the following fields: Date, Distance, Time and Minutes/Km. My main problem is that I want to display the Time in format of mm:ss. For example: 24 min and 3 sec should be 24:03, but "Excel" turns it to 00:03:00 (3 min after midnight). I've tried setting up "special formatting" but still "Excel insists" on formatting the hours. More over, training may exceed 60 minutes and I still want it only as mm:ss
My second question is after I'm done with the formatting issue, what is the simple way to compute Time/Distance?
enter the values as 0:mm:ss and format as [m]:ss
as this is now in the mins & seconds, simple arithmetic will allow you to calculate your statistics
Excel shows 24:03 as 3 minutes when you format it as time, because 24:03 is the same as 12:03 AM (in military time).
Use General Format to Add Times
Instead of trying to format as Time, use the General Format and the following formula:
=number of minutes + (number of seconds / 60)
Ex: for 24 minutes and 3 seconds:
=24+3/60
This will give you a value of 24.05.
Do this for each time period. Let's say you enter this formula in cells A1 and A2. Then, to get the total sum of elapsed time, use this formula in cell A3:
=INT(A1+A2)+MOD(A1+A2,1)
Convert back to minutes and seconds
If you put =24+3/60 into each cell, you will have a value of 48.1 in cell A3.
Now you need to convert this back to minutes and seconds. Use the following formula in cell A4:
=MOD(A3,1)*60
This takes the decimal portion and multiples it by 60. Remember, we divided by 60 in the beginning, so to convert it back to seconds we need to multiply.
You could have also done this separately, i.e. in cell A3 use this formula:
=INT(A1+A2)
and this formula in cell A4:
=MOD(A1+A2,1)*60
Here's a screenshot showing the final formulas:
To make life easier when entering multiple dates/times it is possible to use a custom format to remove the need to enter the colon, and the leading "hour" 0. This however requires a second field for the numerical date to be stored, as the displayed date from the custom format is in base 10.
Displaying a number as a time (no need to enter colons, but no time conversion)
For displaying the times on the sheet, and for entering them without having to type the colon set the cell format to custom and use:
0/:00
Then enter your time. For example, if you wanted to enter 62:30, then you would simply type 6230 and your custom format would visually insert a colon 2 decimal points from the right.
If you only need to display the times, stop here.
Converting number to time
If you need to be able to calculate with the times, you will need to convert them from base 10 into the time format.
This can be done with the following formula (change A2 to the relevant cell reference):
=TIME(0,TRUNC(A2/100),MOD(A2,100))
=TIME starts the number to time conversion
We don't need hours, so enter 0, at the beginning of the formula, as the format is always hh,mm,ss (to display hours and minutes instead of minutes and seconds, place the 0 at the end of the formula).
For the minutes, TRUNC(A2/100), discards the rightmost 2 digits.
For the seconds, MOD(A2,100) keeps the rightmost 2 digits and discards everything to the left.
The above formula was found and adapted from this article:
PC Mag.com - Easy Date and Time Entry in Excel
Alternatively, you could skip the 0/:00 custom formatting, and just enter your time in a cell to be referenced of the edge of the visible workspace or on another sheet as you would for the custom formatting (ie: 6230 for 62:30)
Then change the display format of the cells with the formula to [m]:ss as #Sean Chessire suggested.
Here is a screen shot to show what I mean.
If you are using hand inputted data, you can enter your data as mm:ss,0 or mm:ss.0 depending on your language/region selection instead of 00:mm:ss.
You need to specify your cell format as [m]:ss if you like to see all minutes seconds format instead of hours minutes seconds format.
as text:
=CONCATENATE(TEXT(cell;"d");" days ";TEXT(cell;"t");" hours ";MID(TEXT(cell;"hh:mm:ss");4;2);" minutes ";TEXT(cell;"s");" seconds")
5.In the Format Cells box, click Custom in the Category list.
6.In the Type box, at the top of the list of formats, type [h]:mm;# and then click OK. (That’s a colon after [h], and a semicolon after mm.)
YOu can then add hours. The format will be in the Type list the next time you need it.
From MS, works well.
http://office.microsoft.com/en-us/excel-help/add-or-subtract-time-HA102809662.aspx
One convenient trick to entering elapsed times into Excel is to have two zeros and a colon before the number of minutes, details follow. For copy and paste operations into Excel without have to worry about formatting at all one can use the format 00:XX:XX where XX are two digits totaling < 60. In that case, Excel will echo 0:XX:XX in the cell contents displayed and store the data as 12:XX:XX AM. If one pastes data in a 00:XXX:XX format into Excel, or 00:XX:XX where either XX > 59 this will be converted into a fraction of a day.
For example, 00:121:12 becomes 0.0841666666666667, which if multiplied by the number of seconds in a day, 86,400, becomes 7272 s. Next, 00:21:12 would by default show 0:21:12 stored as 12:21:12 AM. Finally, 00:21:60 becomes 0.0152777777777778, also a fraction of a day.
This suggestion is made merely to avoid having to worry about specific formatting in Excel, and letting the program worry about it. Note, for Excel data internally formatted as 12:XX:XX AM one can only use certain Excel commands, for example, one can take an average. However, subtraction will only work when the result is a positive number. Such that converting times into seconds, fractions of a day, or other real number is suggested for access to more complete arithmetic operation coverage.
For example, if one has a column of mixed time formats, or times that are negative and will not display, if one changes the number formatting to General, all the times will be converted to fractions of a day.