I have a folder containing new jar files and I need to replace them on the old version files on a different folder, need to replace even if the version is same.
My sample file name:
SC_S_SyncUp_V3.0.0-a7 20211221.jar
gudusoft.gsqlparser-2.3.0.9.jar
When I try with below command, it is getting only the first part "SC".
ls | cut -d "_" -f 1
SC
Can anyone please guide how to do this.
If you use "ls -1", "ls" will put each file on a line. Then a "for loop" would process each filename. "basename" can remove known suffixes, or you can use "sed" to remove everything past the last ".".
Putting it all together would be:
for file in $(ls -1)
do
f=$(echo $file | sed 's/\.[^\.]*$//')
echo $f;
done
I'm not sure what you want to do with "replace with older versions".
Related
I'd love to have a more elegant solution for a mass rename of files, as shown below. Files were of format DEV_XYZ_TIMESTAMP.dat and we needed them as T-XYZ-TIMESTAMP.dat.
In the end, I copied them all (to be on the same side) into renamed folder:
ls -l *dat|awk '{system("cp " $10 " renamed/T-" substr($10, index($10, "_")+1))}'
So, first I listed all dat files, then picked up 10th column (file name) and executed a command using awk's system function.
The command was essentially copying of original filename into renamed folder with new file name.
New file name was created by removing (awk substring function) prefix before (including) _ and adding "T-" prefix.
Effectively:
cp DEV_file.dat renamed/T-file.dat
Is there a way to use cp or mv together with some regex rules to achieve the same in a bit more elegant way?
Thx
You may use this script:
for file in *.dat; do
f="${file//_/-}"
mv "$file" renamed/T-"${f#*-}"
done
You must avoid parsing output of ls command.
If you have rename utilitity
rename -E "s/[^_]*/T/" -e "s/_/-/g" *dat
Demo
$ls -1
ABC_DEF_TIMESTAMP.dat
DEV_XYZ_TIMESTAMP.dat
$rename -E "s/[^_]*/T/" -e "s/_/-/g" *
$ls -1
T-DEF-TIMESTAMP.dat
T-XYZ-TIMESTAMP.dat
$
This is how I would do it:
cpdir=renamed
for file in *dat; do
newfile=$(echo "$file" | sed -e "s/[^_]*/T/" -e "y/_/-/")
cp "$file" "$cpdir/$newfile"
done
The sed scripts transforms every non-underscore leading characters in a single T and then replaces every _ with -. If cpdir is not sure to exist before execution, you can simply add mkdir "$cpdir" after first line.
I have a large folder of jpegs, which I would like to rename sequentially to image01.jpg, image02.jpg...image533jpg etc.
I have tried using the following
find ‘/myImages/‘ -maxdepth 1 -name ‘*.jpg’ | sort -n | awk 'BEGIN{ x=1 }{printf "mv \"%s\" \”/myImages/image%04d.jpg\”\n”, $0, x++ }' | bash
which I got from here: http://www.algissalys.com/how-to/how-to-quickly-rename-modify-and-scale-all-images-in-a-directory-using-linux
However, this is only returning
>
And then nothing happens, any suggestions would be great.
The easiest way to do that is with rename which you can install with homebrew using:
brew install rename
Then, you can go into your directory containing the images and run:
rename --dry-run -X -e '$_ = "$N"' *jpg
Sample Output
'a.jpg' would be renamed to '1.jpg'
'article.jpg' would be renamed to '2.jpg'
'blob-0.jpg' would be renamed to '3.jpg'
'blob-1.jpg' would be renamed to '4.jpg'
'blob-2.jpg' would be renamed to '5.jpg'
'blob-3.jpg' would be renamed to '6.jpg'
If that looks correct, you can run it again without the --dry-run to actually do it, rather than just telling you what it will do.
If you want your names zero-padded, the easiest is to let rename work out how much padding you need automatically like this:
rename --dry-run -X -N ...01 -e '$_ = "$N"' *jpg
The benefits of using rename are that:
it is simple and powerful
it will warn you before overwriting any files
it can do a dry run and tell you what would happen without actually doing anything
If you want an explanation of the command '$_ = "$N"' then read on...
The rename command is actually a Perl script, so the part I mention above is just a Perl script enclosed in single quotes. The $N is just a Perl variable that expands to be a sequentially increasing number. The Perl special variable $_ is filled with the name of the current file before your little Perl script is executed, and crucially, you are expected to set it to the name you want that input file renamed as.
You could do that with a bash script. Say you have the following in a file called rename_images.
#!/bin/bash
declare -a FILESERIES
FILESERIES=(`ls $1`)
NUM=${#FILESERIES[#]}
NEWNAME=$2
EXT=$3
for (( i=0; i<$NUM ; i++))
do
FI=${FILESERIES[$i]}
NEWFILENAME=`echo $NEWNAME$i$EXT`
mv $FI $NEWFILENAME
done
To do what you need, run the script from within the folder with all the images as follows:
./rename_images '*.jpg' image .jpg
And you should be sorted.
I want to write a script that do specific thing:
I have a txt file e.g.
from1/from2/from3/apple.file;/to1/to2/to3;some not important stuff
from1/from2/banana.file;/to1/to5;some not important stuff
from1/from10/plum.file;/to1//to5/to100;some not important stuff
Now i want to copy file from each line (e.g. apple.file), from original directory tree to new, non existing directories, after first semicolon (;).
I try few code examples from similar questions, but nothing works fine and I'm too weak in bash scripting, to find errors.
Please help :)
need to add some conditions:
file not only need to be copy, but also rename. Example line in file.txt:
from1/from2/from3/apple.file;to1/to2/to3/juice.file;some1
from1/from2/banana.file;to1/to5/fresh.file;something different from above
so apple.file need to be copy and rename to juice.file and put in to1/to2/to3/juice.file
I think thaht cp will also rename file but
mkdir -p "$to"
from answer below will create full folder path with juice.file as folder
In addidtion after second semicolon in each line will be something different, so how to cut it off?
Thanks for all help
EDIT: There will be no spaces in input txt file.
Try this code..
cat file | while IFS=';' read from to some_not_important_stuff
do
to=${to:1} # strip off leading space
mkdir -p "$to" # create parent for 'to' if not existing yet
cp -i "$from" "$to" # option -i to get a warning when it would overwrite something
done
Using awk
(run the awk command first and confirm the output is fine, then add |sh to do the copy)
awk -F";" '{printf "cp %s %s\n",$1,$2}' file |sh
Using shell (get updated that need manually create folder, base on alfe's
while IFS=';' read from to X
do
mkdir -p $to
cp $from $to
done < file
I had this same problem and used tar to solve it! Posted here:
tmpfile=/tmp/myfile.tar
files="/some/folder/file1.txt /some/other/folder/file2.txt"
targetfolder=/home/you/somefolder
tar --file="$tmpfile" "$files"
tar --extract --file="$tmpfile" --directory="$targetfolder"
In this case, tar will automatically create all (sub)folders for you! Best,
Nabi
I want to copy multiple files in one go using cp. The problem is that the filenames contain spaces here and there. So I tried cp $(ls -1|tr ' ' '') dest but apparently I cannot truncate to nothing. Then I tried removing null space to spaces. That didnt work either. I tried running it over a for loop. That too didnt work. Can some one please help me????
You might want to try using find in combination with xargs and cp. See How can I use xargs to copy files that have spaces and quotes in their names? for more info.
Ahn, ok.
I was writing this:
for i in *
do
if echo $i | grep " "
then
NEWNAME=`echo $i | tr ' ' '_'`
mv "$i" $NEWNAME
fi
done
But in this case you rename the file (and of course you have to adapt the code to your needs)
I have this function in my .bashrc
The problem is that you can't tr the source file names for cp - you have to give it the names of the files as they exist on disk or it won't find them. So it sounds like what you effectively want is to cp "file with spaces" destdir/filewithspaces for each individual file:
ls -1 | while read filename; do
cp "$filename" "$dest/${filename// /}"
done
The ${filename// /} is an instance of the bash-ism ${variable//search/replacement} (see shell parameter expansion in the Bash manual) to give the value of a variable with all instances of the search string replaced with the replacement string - so in this case replace all spaces with nothing.
Assuming an ini-style file like this,
[Group]
Icon=xxx.ico
Title=An Image Editor
Description=Manipulates .ico, .png and .jpeg images
I want to replace/delete ".ico" ONLY in the line that starts with (or matches) "Icon="
I was trying this:
oldline="`cat "$file" | grep "Icon="`"
newline="`echo "$oldline" | tr ".ico" ".png"`"
cat "$oldfile" | tr "$oldline" "$newline" > $file
Then i realized that tr works completely different than i thought. Its NOT a tradicional "replace this for that" function. So i guess the correct way is using sed. But:
Ive never used sedbefore. No idea how it works. Is it overkill?
If the most indicated way is really using sed, given it is so powerful, is there any elegant way to accomplish this rather than this "fetch line -> modify line -> replace oldline for newline in file" approach?
Notes:
I cant replace ".ico" globally, i know that would be a LOT easier, i must restrict the replace to the Icon line, otherwise the Description line would be changed too.
Im new to shell scripting in Linux, so im looking not only to the solution itself, but also for the "proper" way to do it. Elegant, easy to read, conventional, etc
Thanks in advance!
Edit:
Thank you guys! Here is the final script, as a reference:
#! /bin/bash
# Fix the following WARNING in ~/.xsession-errors
# gnome-session[2035]: EggSMClient-WARNING: Desktop file '/home/xxx/.config/autostart/skype.desktop' has malformed Icon key 'skype.png'(should not include extension)
file="$HOME/.config/autostart/skype.desktop"
if [ -f "$file" ] ; then
if `cat "$file" | grep "Icon=" | grep -q ".png"` ; then
sed -i.bak '/^Icon=/s/\.png$//' "$file"
cp "$file" "$PWD"
cp "${file}.bak" "$PWD"
else
echo "Nothing to fix! (maybe fixed already?)"
fi
else
echo "Skype not installed (yet...)"
fi
MUCH sleeker than my original! The only thing i regret is that sed backup does not preserve original file timestamp. But i can live with that.
And, for the record, yes, ive created this script to fix an actual "bug" in Skype packaging.
Something like the following in sed should do what you need. First we check if the line starts with Icon= and if it does then we run the s command (i.e. substitute).
sed -i '/^Icon=/s/\.ico$/.png/' file
Edit: The sed script above can also be written like this:
/^Icon=/ { # Only run the following block when this matches
s/\.ico$/.png/ # Substitute '.ico' at the end of the line with '.png'
}
See this page for more details on how to restrict when commands are run.
sed is pretty easy to deal with. Here's one way:
sed 's/^\(Icon=.*\)\.ico$/\1.png/'
By default, sed works on every line in the file one at a time. The 's/.../.../' will do a regular expression match on the first argument and replace it with the second argument. The \1 stands for everything that matched the first group, which is demarcated by the parenthesis. You have to escape the parens with \.
The above works as part of a pipeline, but you can add an '-i' flag, like this
sed -i 's/^\(Icon=.*\)\.ico$/\1.png/' input.txt
to have it replace the file input.txt in place. Don't add that until you have tested your sed script a little.