After updating my Android studio to Arctic Fox, Gradle scripts don't behave as previously. It does not show the root Gradle scripts to run. Any idea on this? How do I obtain Debug and Release SHA-1 fingerprints from the GUI?
Below steps will helpful to generate SHA1 signature from Android Studio Arctic Fox
Click on Gradle from right pane in Android Studio and check below screenshot
After click on Execute Gradle Task then it opens pop-up as Run Anything
Write signingReport command after gradle keyword shown in popup and press enter then it will showing the debug key of MD5, SHA1 and SHA-256
In Run window from bottom side of Android Studio, it will showing the debug key of MD5, SHA1 and SHA-256
Above picture will help you to obtain the SHA1 signature easily from Arctic Fox.
You just need to go to File > Settings...
In the Experimental menu, uncheck the option 'Do not build Gradle task list during Gradle sync'. See the steps below.
If you're on windows run
.\gradlew signingReport
and on Linux/Mac run
gradlew signingReport
This will generate the keys and show them in terminal. This command will give the debug keys. For release keys you can you can follow this answer. You can also get debug keys from the answer.
Related
Inside Android Studio I'm getting the error:
Generating signed Bundle requires you
to update the Android Gradle plugin
to version 3.2.0 or higher
If I click "Close this dialog and update the plugin" it goes to another prompt asking whether to update. Clicking "Update" appears to do nothing except close the prompt.
All other similar issues and advice are from a few years ago and the latest version of AndroidStudio has a different interface and have not helped in this situation.
I am running:
Android Studio 3.6.3
Gradle 6.4
UPDATE:
Below is a requested screenshot of the AndroidStudio UI for setting up project structure:
In Android Studio do the following:
1. File -> project structure
2. Select "project" from the left hand side.
3. On the right hand side under "Android Gradle Plugin Version" use the drop-down menu to select the Gradle plugin version you desire.
4. Press "Apply" and then "Ok"
If for some reason you could not do that, you can try:
1. Under "Gradle Scripts" choose "build.gradle(project: ... )".
2. From the right hand side under "dependencies" change the build gradle version to the required or latest one on this line:
3. Do not forget to sync on the top right hand side
In my case I was having the same issue when I after installing it opened Android Studio and tried to Profile or Debug APK. For me the issue was solved when I created a new (empty) project. Then the Android Gradle Plugin updated itself.
"Generate Signed APK" option is not display in android studio Build menu,
What is the problem or something I missed to install?? Thanks
When I click "Build APK(s)" , the android studio is no response
For me, clicking File > Sync Project with Gradle File System solved it for me.
Firstly check with clean > rebuild project and see that 'app' is not having "red X" icon.
Check your gradle that you had not configured it with release config yet.
There must be a signing config in gradle file
Follow Below Steps for Nice and Easy Way:-
Go to Tools->Flutter->Open for editing in android studio.
open for editing in android studio
Choose separate window. This will open the android part of your project in separate window.
Wait to Gradle to finish it's build.
Go to Build-> Generate signed bundle/apk.
Follow this video for further process.
Thank me later..!
in my case, one of my harddisks hard stopped working (in which I had my first project).
File > Settings > Appearance & Behaviour > Build, Execution, Deployment > Build Tools > Gradle menu, changing the Gradle user home to another folder solved the issue. the original value of it consisted path to my first project which wasn't existing anymore.
I had the same issue not having the "generate signed bundle/apk" enabled in Android Studio interface and this thread helped to deduce what was my issue... I'm new to android development so I didn't know what to do at all but checking the build.gradle file I realized that there were issues with the synchronization of gradle, so I found this video, downloaded the latest version of Grandle, then went to File > Sync with Fyle System, and after the sync was completed the button appeared.... so seems like this has a direct relation to the right synchronization of gradle.
The gradle window is missing in the android studio for my flutter project but it is available for my Kotlin project.
I have to generate the signing certificate SHA-1 to register my app in Firebase.
Here is how you find the gradle section in Android Studio for a Flutter-Project:
Open the build.gradle file in app/src/
There should appear a small bar at the top of the code-editor and click Open for Editing in Android Studio
A new window will open, showing the option for opening the gradle section in the side-panel, as expected.
This answer is giving you a quite extensive explanation for then generating the SHA1-fingerprint.
The problem for Android Studio is that the android(gradle)-project is not top-level.
You can right-click on project- or android-folder, select Flutter->'Open Android module in Android Studio' .
After that the gradle-tab appears on the right and you can use it as intended.
I am not able to see my SHA-1 key in the android studio.When clicking on the signing report sha-1 key is not displayed in console in Android Studio.
After you run the signing report click Gradle Console its on the bottom right then just scroll until you see it
When I open android studio I am getting an error- "Error loading project: Cannot load 2 facets. When I clicked to see the error the following appeared
"2 facets cannot be loaded. You can mark them them as ignored to suppress this error notification.
Unknown facet type:'android', Unknown facet type:'android-gradle'
I tried to add facets ( In Project Structure > Project settings > Modules > clicked project name, then clicked Android as well as Android-Gradle) But both showed as "cannot load facet, unknown facet type." Under Project settings > Facets > both Android and Android-Gradle are displayed as 'Invalid facets'.
My project was running smoothly. This problem occured when I force-closed my laptop before exiting android studio as everything got stuck. After that whenever I open the android studio this problem occurs. I am not able to run my project. Can anyone please help me to solve this?
Just enable Android Support plugin.
Click Ctrl+Alt+S in Windows or Meta+Comma in Mac.
In top search bar type "plugin".
On right side it will show a list of plugins, find Android Support plugin, check it and click OK at the bottom of screen.
This is how it looks:
In Android Studio go to
File -> Settings - > Plugins -> Enable "Android Support" Plugin.
File, Then Settings->Plugin->Enable/Renable Plugin --> Apply --> Restart
This problem occured when i'd updated Android Studio.
In case nothing from other answers works, you don't have another option, except removing broken settings and making clean setup.
So what i am suggesting:
Use Settings Repository Feature to store personal IDE settings
close studio
remove .AndroidStudioX folder from user folder
re-launch studio, do not copy settings from previous version (because settings probably broken and auto-import couldn't import it well)
import personal settings from Settings Repository
For me I went to Settings -> Plugins and de-selected Gradle then immediately re-selected it. Android Studio then asked if I wanted to enable Groovy so I said yes and let it restart and now everything is happy again! (it was checked, but clearly somewhere deep down not truly enabled, so toggling the check-box sorted it)
Not sure if my cause was installing Flutter, but I did have to disable the Flutter plugin before I could build again.
I had the same problem with an ever-increasing number of facets - first 2, then 4, then 5 - and none of the above solutions worked. My solution (Android Studio 3.3, OS X) was to delete ~/Library/Preferences/AndroidStudio3.3/disabled_plugins.txt, which contained org.jetbrains.android and org.jetbrains.maven
I imagine if you have deliberately disabled plugins then you'll have to disable them again manually, but I was able to load all facets again.
Go To ->File->Settings->Plugins->disable/enable Android Support Plugins->Press Ok
Just re-enable Android Support plugin. Then it will ask to restart.
Restart them thats it
I faced this issue in Android Studio 3.2.1 I had to re-import my project after that it works.
I was facing this problem, I tried everything but nothing worked but then I remembered that I updated Android Studio just few hours back and then I enabled the plugins in the Android Studio and restarted it and it worked.
File -> Settings -> Plugin and then just press ok. It will ask to restart the android studio and please restart it.
For me I had to uncheck the plugin Android APK Support. I clicked Apply and then Ok to close the window. Android Studio prompted me to restart the program, and the program restarted. I checked the Android APK Support plugin again and restarted the program. And then I selected File -> Sync Project with Gradle Files
Then it worked just fine.