I'm using Azure AD as my Identity Provider (IdP) and trying to connect Auth0 to it as a client. I've followed all the steps mentioned in
https://auth0.com/docs/connections/enterprise/azure-active-directory/v2
Redirection from Auth0 to Azure AD is working as expected. Login on Azure AD side is also showing a success in its log, however I'm getting and error at Auth0 side which says,
"Invalid client secret is provided"
I've double checked the client secret. Freshly generated it to eliminate possiblity of its expiry but still gettting this error.
Below is an error message payload.
"error": {
"message": "failed to obtain access token",
"oauthError": "invalid_request",
"type": "request-error",
"payload": "{
"error":"invalid_client","error_description":"AADSTS7000215: Invalid client secret is provided.
Trace ID: 52ea6301-3da2-46c7-b355-865dfff34c01
Correlation ID: 69415f95-1430-45eb-b653-3c76f934ccc0
Timestamp: 2021-11-29 05:11:57Z",
"error_codes":[7000215],
"timestamp":"2021-11-29 05:11:57Z",
"trace_id":"52ea6301-3da2-46c7-b355-865dfff34c01",
"correlation_id":"69415f95-1430-45eb-b653-3c76f934ccc0",
"error_uri":"https://login.microsoftonline.com/error?code=7000215"}"
},
Make sure you have copied client secret value and not the client secret ID.
Gave wrong value of client secret getting the same error as you.
Would Suggest you try with following parameter as I have set for authorization type OAuth2.0.
URL : https://login.microsoftonline.com/{tenantid}/oauth2/v2.0/token
Given the correct value of Client Secret and getting the access token.
Also, check that the Azure AD Client secret is not expired. Otherwise, generate a new one, then update it in the enterprise connection configured with Auth0.
Related
In basic terms, I am trying to get an access token to get Azure Cost Centre Data through the Usage Details API. The problem is that I can't seem to configure my service principal with azure properly. I have:
Created the registered app in Azure Active Directory
added https://www.thunderclient.io/oauth/callback in the redirect URL
generated a client secret
Included the following information in my Generate New Token in Thunder Client:
Request URL:
GET: https://management.azure.com/subscriptions/{subscription-id}/resourceGroupName/{resourceGroupName}/providers/Microsoft.CostManagement/dimensions?api-version=2019-11-01
Grant Type: Authorization Code
Auth Url: https://login.mmicrosoftonline.com/common/oauthorize
Token Url: https://login.microsoft.com/{tenant-id}/oauth2/v2.0/authorize from app registration
callback Url: https://thunderclient.io/oauth/callback
client ID: {{client_id}} from app registration
client secret: {{client_secret}} from app registration
scope: user_impersonation
{
Status 401 Unauthorized
"error": {
"code": "AuthenticationFailed",
"message": Authentication failed."
}
}
Header:
Bearer authorization_uri "https://login.windows.net/{tenant_id}, error= "invalid_token", error description="Could not find identity for access token"
Answering my own question. And big thanks to Guarav Mantri in the comments below.
The Scope should be set to https://management.azure.com/.default
The Grant Type is client credentials and not authorization code
The service principal needs to be added to the resource in azure that is part of the request (i.e. if looking for subscription data, then add the service principal as a reader role to the subscription).
I have a client API which implements MSAL to fetch access token from Azure AD B2C. This API authenticates with AD B2C tenant using certificate and not secret. The issue is when I try to authenticate using root certificate which is uploaded in AD B2C and client certificate which is pass from the client API it fails with an exception.-
A configuration issue is preventing authentication - check the error message from the server for details. You can modify the configuration in the application registration portal. See https://aka.ms/msal-net-invalid-client for details. Original exception: AADSTS700027: Client assertion contains an invalid signature. [Reason - The key was not found., Thumbprint of key used by client: 'FE5D9FEF5D0D528B8ED641727E903E50953D44CE', Please visit the Azure Portal, Graph Explorer or directly use MS Graph to see configured keys for app Id 'f3bfc1b2-f1b2-4552-9145-7019c8683a41'. Review the documentation at https://learn.microsoft.com/en-us/graph/deployments to determine the corresponding service endpoint and https://learn.microsoft.com/en-us/graph/api/application-get?view=graph-rest-1.0&tabs=http to build a query request URL, such as 'https://graph.microsoft.com/beta/applications/f3bfc1b2-f1b2-4552-9145-7019c8683a41']
Trace ID: 59cf24e3-96bb-48ca-8d4b-f8cf0e5d0e00
Correlation ID: 496261ed-31c3-46c1-9fdb-a59c966ddf3d
Timestamp: 2020-12-28 08:16:12Z
As far as I know, this error is usually caused by the fact that you did not encode the thumbprint correctly. After you obtain the thumbprint, please check your code to ensure that it is properly Base64 encoded.
I am trying to update keyvault secret in Azure through Postman. But getting Authorization error.
Any suggestions. Anything I am missing. Thanks in advance
{
"error": {
"code": "Unauthorized",
"message": "AKV10022: Invalid audience. Expected https://vault.azure.net, found: https://management.azure.com/."
}
}
Using the below to update the secret:
PUT https://demokv.vault.azure.net/secrets/secretname?api-version=7.0
in Body:
{
"value": "mysecretvalue"
}
As mentioned in another reply, the audience of your token is not correct, to call Azure Keyvault REST API - Set Secret - Set Secret, the audience should be https://vault.azure.net.
To get the token, you could use the client credential flow in the postman.
1.Register an AD App in azure ad, then get values for signing in and create a new application secret.
2.Navigate to the keyvault in the portal, add the service principal of the AD App to the Access policies.
In the postman, follow the screenshot below, fix the properties that got from step 1.
POST https://login.microsoftonline.com/<tenant-id>/oauth2/v2.0/token
client_id=<client_id>
&scope=https://vault.azure.net/.default
&client_secret=<client_secret>
&grant_type=client_credentials
Then copy the token to call the REST API to set secret, it will work fine.
Also, you can get the token with az account get-access-token --resource "https://vault.azure.net"
To specificity vault resource
My challenge was using the older version of the oauth API.
Ensure that you're using:
POST https://login.microsoftonline.com/<tenant-id>/oauth2/v2.0/token
And not:
POST https://login.microsoftonline.com/<tenant-id>/oauth2/token
You acquired the access token (Bearer) for the wrong audience,
AKV10022: Invalid audience.
Expected https://vault.azure.net,
Found: https://management.azure.com/.
Acquire a new one for the correct audience and give it another go.
I keep getting a AuthenticationFailed error with a InvalidAuthenticationTokenAudience inner error when attempting to query the /environments endpoint.
I have already created an app in the Azure Active Directory, given it access in the time series insights management portal and I can already get an Oauth 2.0 Access token from the auth URL.
I have tried giving the token url the 'https://api.timeseries.azure.com/' resource/audience/scope but the API keeps returning the same error message:
{
"error": {
"code": "AuthenticationFailed",
"message": "Server failed to authenticate the request. The token has been obtained from wrong audience or resource.",
"innerError": {
"code": "InvalidAuthenticationTokenAudience",
"message": "The access token has been obtained from wrong audience or resource '00000002-0000-0000-c000-000000000000'. It should
exactly match (including forward slash) with one of the allowed
audiences 'https://api.timeseries.azure.com/'."
}
} }
I'm using Postman with the Oauth 2.0 authentication type, the client credentials Grant Type and send as basic Auth Header option for the token request.
Has anyone tried this with success?
Update 01:
The decoded (using JWT as suggested in comments) payload portion of one of the tokens shows the that the aud field is 00000002-0000-0000-c000-000000000000. Which is definitely wrong.
Based on the exception, it indicates that the resource is not matching https://api.timeseries.azure.com/ when acquire the access token.
So please make sure that the resource is https://api.timeseries.azure.com/, for more information please refer to the screenshot.
Get access token
I test Get environments API, it works correctly for me.
GET https://api.timeseries.azure.com/environments?api-version=2016-12-12
My ASP.NET Core web app works great when running and debugging locally, but fails to run once published to Azure.
I enabled Organizational Authentication and selected the appropriate domain upon publishing.
The appropriate reply URL was registered
After I publish to Azure I get this error:
An unhandled exception occurred while processing the request.
OpenIdConnectProtocolException: Message contains error: 'invalid_client', error_description: 'AADSTS70002: The request body must contain the following parameter: 'client_secret or client_assertion'.
Trace ID: 640186d6-9a50-4fce-ae39-bbfc1caf2400
Correlation ID: 622758b2-ca52-4bb0-9a98-e14d5a45cf80
Timestamp: 2017-04-19 16:36:32Z', error_uri: 'error_uri is null'.
I'm assuming that it's because the Client Secret needs to be stored in Azure somewhere; however, the value in secrets.json did not work when I added it as an App Setting (invalid client secret error) as I saw someone was able to do on another post. Also not sure if putting the value of "Authentication:AzureAd:ClientSecret" in Azure AppSettings is a good idea anyway.
Not sure if this is useful to anyone or not. But i receive a similar error message.
OpenIdConnectProtocolException: Message contains error: 'invalid_client', error_description: 'error_description is null', error_uri: 'error_uri is null'.
Microsoft.AspNetCore.Authentication.OpenIdConnect.OpenIdConnectHandler+<RedeemAuthorizationCodeAsync>d__22.MoveNext()
The solution for me was to provide a secret in the token service
,new Client
{
ClientId = "Testclient",
ClientName = "client",
ClientSecrets =
{
new Secret("secret".Sha256())
},
//Hybrid is a mix between implicit and authorization flow
AllowedGrantTypes = GrantTypes.Hybrid,
And provide the secret in the client
app.UseOpenIdConnectAuthentication(new OpenIdConnectOptions
{
//The name of the authentication configuration.. just incase we have multiple
AuthenticationScheme = "oidc",
//Represents where to store the identity information -> which points to the cookie middleware declared above
SignInScheme = "Cookies",
//where the token service reside -> system will configure itself by invoking the discovery endpoint for the token service
Authority = "http://localhost:5000",
RequireHttpsMetadata = false,
ClientId = "Testclient",
ClientSecret = "secret",
//hybrid flow -grant type
ResponseType = "code id_token",
Hopefully this helps someone
Somehow I the Azure AD IDs needed for the proper Azure Active Directory App Registration were mixed up. There were 2 App Registration entries and the ClientID and TenentID's didn't match up with the local. So I synchronized the Client and Tenent IDs with one of the App Registration entries, and made sure the Client Secret was in App Settings, and it worked properly.
I verified these steps with this fine example Win's GitHub repository and they match now.