I used the npm command to create react app, after that my laptop fan started to get louder and when I tried to open any folder it's just not responding. File Explorer is frozen, it said loading the files but it will take forever. I just can't do my work.
I tried to restart File Explorer from task manager and it won't work.
The only way to fix it is to restart my laptop, but it will happen again sometimes even if I don't do anything with the react project. I just need to restart it a couple of times until it back to normal
The first time it happens I wasn't sure because it was the first time I tried to create react and my laptop also had some problems at the time, so I leave the react project for a month.
The second time is yesterday. When I tried to create react app again, File Explorer got freezing.
All this happen after I used the npm command.
Does someone know the answer? I've been trying to learn react and this makes me discouraged. Please help. (Sorry for my poor English)
I think your pc can't handle create react app. It's very heavy and consumes everything in your pc. Probably if you just let it install without using anything it will be ok.
Related
I have a web app developed with a NodeJS + Express + GraphQL + MongoDB back-end and a ReactJS + Apollo front-end. I would like to deploy this application locally. Is that even possible?
I have come across dozens of "how to deploy to Heroku," "how to deploy to Digital Ocean", "how to deploy to Github", etc. But none that explains how to deploy locally.
Right now, I run: nodemon server for the back-end, and npm start for the front-end. I see the application running on http://localhost:3000/ (I use cors to connect the front end with the server running on port 3001).
I would like to just go to http://localhost:3000/ and see the app without having to execute the commands npm start and nodemon server. Is this possible? If so, how do I do that?
To my knowledge, our local server is not a WAMP server (our OS is Windows though). The IT department told me that it is a
[...] plain, regular old server. The address is localhost running on
port 3000. You can open up another port on 3001 if you need it. Just
drop your stuff on the C: drive and you should be good to go. I've
never heard of Node or React so I can't help if you have questions.
Any ideas? Many thanks in advance for your help!
UPDATE
There seems to be a bit of confusion surrounding what I am looking for. I am trying to deploy this locally.
Let's say, on your local computer (your laptop at home) you go to localhost:3000 on your favorite browser. Unless you are serving something to localhost in that moment nothing is going to show up, it will say "refused to connect" or something. What I want is to be able to open any machine on the network whenever I go to localhost:3000 and my react site appears and functions...does that make more sense?
I don't want this is development mode. I want a build of this project on localhost...I'm starting to think this isn't possible.
As i understood, you want to deploy it on a local server, not locally on your developing device.
I thought about doing that...but I'm not so sure IT will be okay with it always running... :(
How can you use a server if its not running? Just like WAMP (which runs apache), or whatever you got rolling there, it must be running. So, just make it a background process like slawomir suggested.
PS I dont think you understand node server properly though.
Read this to understand why node server needs reloading. After that you need to understand that no hot reload tool is perfect, and you gonna need to restart your server from time to time.
PPS I dont know what this means
[...] plain, regular old server. The address is localhost running on port 3000.
if there is a server running on 3000, youll need to change port for your server to smth else (most common is 9000)
To solve the problem you can create a startup script, which executes npm start and nodemon server. Then make sure to keep it hidden, so that your server will be always running. Keep in mind though, that any errors thrown will stop your server and unless you configure it, the server won't reload by itself.
I would try following:
build your app with the production environment variables set
get all files from dist folder and deploy them in your server
now access your app using localhost/
Maybe what you are looking for is something like ngrok which creates a socks tunnel to your localhost, effectivelly deploying from localhost, as I understand it, allowing you to access your localhost through a url like ldiuhv093.ngrok.io, or even a custom subdomain if you pay for a subscription fee.
If I have this wrong, someone please tell me!
To solve the problem first of need to create a batch file with .bat or .cmd extension and under that file add the following 2 command
nodemon server
npm start
Then follows the following steps to add it as a startup script for windows OS.
Create a shortcut to the batch file.
Once the shortcut has been created, right-click the file and select
Cut.
Press the Start button and type Run and press enter.
In the Run window, type shell:startup to open the Startup folder.
Once the Startup folder has been opened, click the Home tab at the
top of the folder and select Paste to paste the shortcut into the
folder.
Above steps are for example to create a batch file and add it as a startup script for Windows 8 and 10 users.
For better clarity or reference follows the following link.reference-link
There's no option to reload the server while keeping it running. You could, technically, have your 'main' file monitor another file for changes. This would be the file where you actually keep your sever program. Then, on changes, you discard your current logic and start executing that. That said, doing it that way would be very fragile and a very round-about way to do it. It also wouldn't fix your front-end for which you'd need a similar solution.
Instead, you could hook into your favorite editor's save event, and run those two console commands, so that every time you save, the server is automatically brought up. (Make sure to also clean up existing servers)
Run on Save for VSCode
save-commands for Atom
I know this post has been two years. But, I think the solution to your second desired outcome is to use concurrency. https://www.npmjs.com/package/concurrently.
This will allow you to do one NPM START to start two all three processes.
and to your first question, I think the solution is to add Electron to your app so you can package it to an executable application. When you start the app, your express server will start running in the background.
Most people probably don't understand why there is a need for this. Running on local server (computer) allows access to local file system and can even run SQL queries inside the proxy which would require IT involvement if hosted on outside server.
From what I have understand, that you want to deploy your app on local server that means you want to deploy it on the network that you are connected to.
Check ip from the command prompt
To deploy it locally,
Run: HOST=ip npm run start
It will get deploy on your local server. And everyone connected to the server can access the url
If this worked for you, kindly upvote
You need to do npm start There may be other ways of starting it but, all will result in the same. You can read this article on Freecodecamp on deploying on DigitalOcean. You can manipulate it to your localhost. Shouldn't be too different.FCC Tut on Deploying
So I'm getting a blue screen of death whenever I have "npm start" running for a reactjs app. It's an intermittent crash, i.e. it doesn't happen every time I run it nor are there any exact steps to duplicate the crash, but I'll try to explain below under what circumstances it happens.
Create a reactjs app using create-react-app npm module.
Start the app using npm start. Chrome window opens, webpack is listening to changes I make to the source files.
Change any source file, and save it. NPM compiles it, Chrome page refreshes, and I can see my changes.
The above things work fine as expected "normally", but once in a while, right after I save a file, the system crashes with a BSOD saying DRIVER_IRQL_NOT_EQUAL_TO_OR_GREATER_THAN (NETIO.SYS) There is no definite "step" or action other than saving the file, or refreshing Chrome that would cause this to happen, and it also doesn't happen every single time.
Here are the steps I took to find out/eliminate the root cause of this issue:
Disabled by AV (Symantec Endpoint Protection).
Use a different browser (Mozilla, hell, even IE).
Changed the system (used a different laptop, although the same type - Microsoft Surface on Windows 10)
Updated all drivers, etc. (Verified by my organization admins)
Closing all other programs, etc. that might potentially be interfering (Atom IDE, Eclipse, etc.)
The necessary conditions for the crash to happen are:
npm start must be running (webpack server on localhost:3000)
A browser window must be open connected to localhost:3000 (if no browser is connected, it doesn't crash even if you change and save the file 200 times - I checked). Also, doesn't matter which browser (Checked with Mozilla/Edge/Chrome)
I believe the crash happens when NPM is recompiling the files and serving it to the browser (asking it to refresh using some websockets), but I'm not an expert on NodeJS/NPM so I'm not sure.
I've been stuck on this issue for more than 2 weeks now. Any help would be really appreciated. Kindly let me know if more information is needed.
The issue was with Symantec DLP (Data Loss Prevention) that was also installed on all our systems. The issue resolved itself after the admins added application exceptions for Nodejs, NPM, my reactjs project workspace paths.
Just posting this so that in case someone has a similar issue they can try this or remove Symantec DLP altogether.
I have my work computer which is a Windows 10 Pro and my laptop is a Windows 10 Home. Working on the same project on both: push and pull to Git. Learning React through Udemy. Both computers using Chrome. Both using Bash on Ubuntu on Windows with latest updates. Both using ConEmu for the console. Both npm -v = 3.10.10. Both node -v = 6.11.2. Hardware is different obviously, but not sure that is relevant and worth listing.
Anyway, this starter project I am playing around with, when I make changes to it and npm start is running, you can see activity in the console, hit refresh in the browser, and any changes made will be reflected.
On the laptop, this process does not work. Make change, save, no activity in console, refresh in browser does not reflect the changes. Have to restart npm start for changes to be reflected. A little irritating to say the least.
Anyway idea what might cause this? Really haven't come across anything in my Googling efforts.
If you are using npm in WSL2.0 for development, please refer the last point in this-
https://create-react-app.dev/docs/troubleshooting/#npm-start-doesnt-detect-changes
While WSL1.0 doesn't use a VM, WSL2.0 does use a lightweight VM, so adding
CHOKIDAR_USEPOLLING=true
in a .env file in the project directory fixed the problem.
On a sidenote, you might wanna take a look at this
Client side
To ensure client side changes aren't being cached, you can open devtools > Network, and check "Disable cache". After enabling this, you won't have anything in the cache as long as devtools is open.
Alternatively, you can use incognito / private browsing mode to prevent the cache from holding on to things.
Server side
I'm sure you've realized that it's a pain to restart your server every time you want to see your code update. There are several tools that will detect file changes and handle restarting the server automatically.
PM2
Nodemon
Forever
I just add file .env and inside FAST_REFRESH=false.
For me, working in Windows, WSL2 caused this not to work. Running npm start in Command Prompt, not WSL solved this issue for me.
I'm having an issue in my React environment where I must restart ('npm start') my server every time I want to view an update in the browser. Others seem to be able to simply refresh the browser without the need to restart their servers.
For instance, if I make an update in one of the React Components I can't simply refresh the web page, I have to restart the entire server.
Any suggestions how to fix this issue so I don't need to restart every time?
This problem was fixed once I moved my application out of my Dropbox directory.
Once I moved the application out of the Dropbox directory I no longer needed to manually restart the server when I made any edit to a React component. Note that the application does work just fine and auto-refresh using Google Drive
(linked to the cloud) or a general non-cloud linked folder on my HD.
I was getting the same problem using Visual Studio Code. When I made changes nothing was showing up. VC gave me a hint by saying
"Visual Studio Code is unable to watch for file changes in this large workspace"
so I found these instructions which solved the problem. Could be related.
When you see this notification, it indicates that the VS Code file watcher is running out of handles because the workspace is large and contains many files. The current limit can be viewed by running:
cat /proc/sys/fs/inotify/max_user_watches
The limit can be increased to its maximum by editing /etc/sysctl.conf and adding this line to the end of the file:
fs.inotify.max_user_watches=524288
The new value can then be loaded in by running sudo sysctl -p. Note that Arch Linux works a little differently, See Increasing the amount of inotify watchers for details.
Check out Create-React-App by Facebook. It has all the essential tools you'll need when developing React apps.
I use a combination of Webpack to bundle the js code and Nodemon for server restart. They both have watch functionality so they can watch the code to see if anything has changed.
Seems to be an norm from my research.
I'm making an app in the Cloud9 IDE using Node.js with the Express.js framework. Something very odd is happening to a specific .ejs file where if I try to update it (like typing some mumbo jumbo in an h1 tag and then saving and restarting the server), it NEVER gets reflected in the browser no matter what I do. For example, if I delete my jumbotron, save, restart the server, and then refresh the browser, I still see the same page with the jumbotron. I also tried deleting this entire file and then restarting the server and I still see the page and it doesn't break my application which is bizarre. All other .ejs files are fine and I can see the changes that I make.
I've spent about 4 hours trying to figure this out and no one else seems to have my specific issue. I tried clearing my browser cache, using different browsers, logging in/out from Cloud9, creating a new database, going back to older versions of my code, etc. and nothing seems to be working. I'm not even sure what code to post on here since my entire app is about 2000 lines of code so far. Does anyone have any suggestions because this is really frustrating.