I have 20 files like:
01a_AAA_qwe.sh
01b_AAA_asd.sh
01c_AAA_zxc.sh
01d_AAA_rty.sh
...
Files have a similar format in their names. They begin with 01, and they have 01*AAA*.sh format.
I wish to copy and rename files in the same directory, changing the number 01 to 02, 03, 04, and 05:
02a_AAA_qwe.sh
02b_AAA_asd.sh
02c_AAA_zxc.sh
02d_AAA_rty.sh
...
03a_AAA_qwe.sh
03b_AAA_asd.sh
03c_AAA_zxc.sh
03d_AAA_rty.sh
...
04a_AAA_qwe.sh
04b_AAA_asd.sh
04c_AAA_zxc.sh
04d_AAA_rty.sh
...
05a_AAA_qwe.sh
05b_AAA_asd.sh
05c_AAA_zxc.sh
05d_AAA_rty.sh
...
I wish to copy 20 of 01*.sh files to 02*.sh, 03*.sh, and 04*.sh. This will make the total number of files to 100 in the folder.
I'm really not sure how can I achieve this. I was trying to use for loop in the bash script. But not even sure what should I need to select as a for loop index.
for i in {1..4}; do
cp 0${i}*.sh 0${i+1}*.sh
done
does not work.
There are going to be a lot of ways to slice-n-dice this one ...
One idea using a for loop, printf + brace expansion, and xargs:
for f in 01*.sh
do
printf "%s\n" {02..05} | xargs -r -I PFX cp ${f} PFX${f:2}
done
The same thing but saving the printf in a variable up front:
printf -v prefixes "%s\n" {02..05}
for f in 01*.sh
do
<<< "${prefixes}" xargs -r -I PFX cp ${f} PFX${f:2}
done
Another idea using a pair of for loops:
for f in 01*.sh
do
for i in {02..05}
do
cp "${f}" "${i}${f:2}"
done
done
Starting with:
$ ls -1 0*.sh
01a_AAA_qwe.sh
01b_AAA_asd.sh
01c_AAA_zxc.sh
01d_AAA_rty.sh
All of the proposed code snippets leave us with:
$ ls -1 0*.sh
01a_AAA_qwe.sh
01b_AAA_asd.sh
01c_AAA_zxc.sh
01d_AAA_rty.sh
02a_AAA_qwe.sh
02b_AAA_asd.sh
02c_AAA_zxc.sh
02d_AAA_rty.sh
03a_AAA_qwe.sh
03b_AAA_asd.sh
03c_AAA_zxc.sh
03d_AAA_rty.sh
04a_AAA_qwe.sh
04b_AAA_asd.sh
04c_AAA_zxc.sh
04d_AAA_rty.sh
05a_AAA_qwe.sh
05b_AAA_asd.sh
05c_AAA_zxc.sh
05d_AAA_rty.sh
NOTE: blank lines added for readability
You can't do multiple copies in a single cp command, except when copying a bunch of files to a single target directory. cp will not do the name mapping automatically. Wildcards are expanded by the shell, they're not seen by the commands themselves, so it's not possible for them to do pattern matching like this.
To add 1 to a variable, use $((i+1)).
You can use the shell substring expansion operator to get the part of the filename after the first two characters.
for i in {1..4}; do
for file in 0${i}*.sh; do
fileend=${file:2}
cp "$file" "0$((i+1))$fileend"
done
done
Related
I'd love to have a more elegant solution for a mass rename of files, as shown below. Files were of format DEV_XYZ_TIMESTAMP.dat and we needed them as T-XYZ-TIMESTAMP.dat.
In the end, I copied them all (to be on the same side) into renamed folder:
ls -l *dat|awk '{system("cp " $10 " renamed/T-" substr($10, index($10, "_")+1))}'
So, first I listed all dat files, then picked up 10th column (file name) and executed a command using awk's system function.
The command was essentially copying of original filename into renamed folder with new file name.
New file name was created by removing (awk substring function) prefix before (including) _ and adding "T-" prefix.
Effectively:
cp DEV_file.dat renamed/T-file.dat
Is there a way to use cp or mv together with some regex rules to achieve the same in a bit more elegant way?
Thx
You may use this script:
for file in *.dat; do
f="${file//_/-}"
mv "$file" renamed/T-"${f#*-}"
done
You must avoid parsing output of ls command.
If you have rename utilitity
rename -E "s/[^_]*/T/" -e "s/_/-/g" *dat
Demo
$ls -1
ABC_DEF_TIMESTAMP.dat
DEV_XYZ_TIMESTAMP.dat
$rename -E "s/[^_]*/T/" -e "s/_/-/g" *
$ls -1
T-DEF-TIMESTAMP.dat
T-XYZ-TIMESTAMP.dat
$
This is how I would do it:
cpdir=renamed
for file in *dat; do
newfile=$(echo "$file" | sed -e "s/[^_]*/T/" -e "y/_/-/")
cp "$file" "$cpdir/$newfile"
done
The sed scripts transforms every non-underscore leading characters in a single T and then replaces every _ with -. If cpdir is not sure to exist before execution, you can simply add mkdir "$cpdir" after first line.
I've a certain amount of files always containing same name but different extensions, for example sample.dat, sample.txt, etc.
I would like to create a script that looks where sample.dat is present and than moves all files with name sample*.* into another directory.
I know how to identify them with ls *.dat | sed 's/\(.*\)\..*/\1/', however I would like to concatenate with something like || mv (the result of the first part) *.* /otherdirectory/
You can use this bash one-liner:
for f in `ls | grep YOUR_PATTERN`; do mv ${f} NEW_DESTINATION_DIRECTORY/${f}; done
It iterates through the result of the operation ls | grep, which is the list of your files you wish to move, and then it moves each file to the new destination.
Something simple like this?
dat_roots=$(ls *.dat | sed 's/\.dat$//')
for i in $dat_roots; do
echo mv ${i}*.* other-directory
done
This will break for file names containing spaces, so be careful.
Or if spaces are an issue, this will do the job, but is less readable.
ls *.dat | sed 's/\.dat$//' | while read root; do
mv "${root}"*.* other-directory
done
Not tested, but this should do the job:
shopt -s nullglob
for f in *.dat
do
mv ${f%.dat}.* other-directory
done
Setting the nullglob option ensures that the loob is not executed, if no dat-file exists. If you use this code as part of a larger script, you might want to unset it afterwards (shopt -u nullglob).
I want to rename all files in a directory to be sequential numbers:
1.txt
2.txt
3.txt
and so on...
Here's the code I'm currently using:
ls | cat -n | while read n f; do mv "$f" "$n.txt"; done
The code does work, but I need to start with a specific number. For example, I may want to start with the number 49 instead of the number 1.
Is there any way to do this in terminal (on a Mac)?
You could use something like nl with the -v option to set a starting line number other than 1, but instead, you can just use Bash features:
i=1
for f in *; do
[[ -f $f ]] && mv "$f" $((i++)).txt
done
where i is set to the initial value you want.
This also avoids parsing the output of ls, which is recommended to avoid. Instead, I use a glob (*) and a test (-f) to make sure that I'm actually manipulating files and not directories.
I just downloaded about 600 files from my server and need to remove the last 11 characters from the filename (not including the extension). I use Ubuntu and I am searching for a command to achieve this.
Some examples are as follows:
aarondyne_kh2_13thstruggle_or_1250556383.mus should be renamed to aarondyne_kh2_13thstruggle_or.mus
aarondyne_kh2_darknessofunknow_1250556659.mp3 should be renamed to aarondyne_kh2_darknessofunknow.mp3
It seems that some duplicates might exist after I do this, but if the command fails to complete and tells me what the duplicates would be, I can always remove those manually.
Try using the rename command. It allows you to rename files based on a regular expression:
The following line should work out for you:
rename 's/_\d+(\.[a-z0-9A-Z]+)$/$1/' *
The following changes will occur:
aarondyne_kh2_13thstruggle_or_1250556383.mus renamed as aarondyne_kh2_13thstruggle_or.mus
aarondyne_kh2_darknessofunknow_1250556659.mp3 renamed as aarondyne_kh2_darknessofunknow.mp3
You can check the actions rename will do via specifying the -n flag, like this:
rename -n 's/_\d+(\.[a-z0-9A-Z]+)$/$1/' *
For more information on how to use rename simply open the manpage via: man rename
Not the prettiest, but very simple:
echo "$filename" | sed -e 's!\(.*\)...........\(\.[^.]*\)!\1\2!'
You'll still need to write the rest of the script, but it's pretty simple.
find . -type f -exec sh -c 'mv {} `echo -n {} | sed -E -e "s/[^/]{10}(\\.[^\\.]+)?$/\\1/"`' ";"
one way to go:
you get a list of your files, one per line (by ls maybe) then:
ls....|awk '{o=$0;sub(/_[^_.]*\./,".",$0);print "mv "o" "$0}'
this will print the mv a b command
e.g.
kent$ echo "aarondyne_kh2_13thstruggle_or_1250556383.mus"|awk '{o=$0;sub(/_[^_.]*\./,".",$0);print "mv "o" "$0}'
mv aarondyne_kh2_13thstruggle_or_1250556383.mus aarondyne_kh2_13thstruggle_or.mus
to execute, just pipe it to |sh
I assume there is no space in your filename.
This script assumes each file has just one extension. It would, for instance, rename "foo.something.mus" to "foo.mus". To keep all extensions, remove one hash mark (#) from the first line of the loop body. It also assumes that the base of each filename has at least 12 character, so that removing 11 doesn't leave you with an empty name.
for f in *; do
ext=${f##*.}
new_f=${base%???????????.$ext}
if [ -f "$new_f" ]; then
echo "Will not rename $f, $new_f already exists" >&2
else
mv "$f" "$new_f"
fi
done
Someone has very kindly help get me started on a mass rename script for renaming PDF files.
As you can see I need to add a bit of logical to stop the below happening - so something like add a unique number to a duplicate file name?
rename 's/^(.{5}).*(\..*)$/$1$2/' *
rename -n 's/^(.{5}).*(\..*)$/$1$2/' *
Annexes 123114345234525.pdf renamed as Annex.pdf
Annexes 123114432452352.pdf renamed as Annex.pdf
Hope this makes sense?
Thanks
for i in *
do
x='' # counter
j="${i:0:2}" # new name
e="${i##*.}" # ext
while [ -e "$j$x" ] # try to find other name
do
((x++)) # inc counter
done
mv "$i" "$j$x" # rename
done
before
$ ls
he.pdf hejjj.pdf hello.pdf wo.pdf workd.pdf world.pdf
after
$ ls
he.pdf he1.pdf he2.pdf wo.pdf wo1.pdf wo2.pdf
This should check whether there will be any duplicates:
rename -n [...] | grep -o ' renamed as .*' | sort | uniq -d
If you get any output of the form renamed as [...], then you have a collision.
Of course, this won't work in a couple corner cases - If your files contain newlines or the literal string renamed as, for example.
As noted in my answer on your previous question:
for f in *.pdf; do
tmp=`echo $f | sed -r 's/^(.{5}).*(\..*)$/$1$2/'`
mv -b ./"$f" ./"$tmp"
done
That will make backups of deleted or overwritten files. A better alternative would be this script:
#!/bin/bash
for f in $*; do
tar -rvf /tmp/backup.tar $f
tmp=`echo $f | sed -r 's/^(.{5}).*(\..*)$/$1$2/'`
i=1
while [ -e tmp ]; do
tmp=`echo $tmp | sed "s/\./-$i/"`
i+=1
done
mv -b ./"$f" ./"$tmp"
done
Run the script like this:
find . -exec thescript '{}' \;
The find command gives you lots of options for specifing which files to run on, works recursively, and passes all the filenames in to the script. The script backs all file up with tar (uncompressed) and then renames them.
This isn't the best script, since it isn't smart enough to avoid the manual loop and check for identical file names.