I have simple problem, but I've not be able to get an answer from searching. I require a column to calculate the number of the nth occurrence of a value. It's best explained in this picture
I require a method to calculate column B.
I'd be very grateful for any help.
Are you looking to merely provide a count of the distinct entries of column A in column B? Or merely add a formula to come up with the table in your link?
If the latter, then the formula to write in cell B2 is:
=COUNTIF(A$2:A2,A2)
then copy/paste it down column B. Note - if your data is both a Date and Time, but the cell is formatted to only display a date, you may not get the results you want. You'd need to interject a new column with a "floor" calculation to round the date/time value to a date (Excel date times are decimal, with integer part dictating the date, and remaining 0.0 -> 1.0 dictating the time of day)
If you just want to derive a table of the counts of distinct entries in column A, then a pivot table will do this for you - simple add a pivot table to cover the data in column A, then select column A into the rows category, and then also drag it into the values category, ensuring the field is set to "Count of". You should then have a table with the distinct entries in your data set in one column, and the count of their occurrences in the other column.
You can use the COUNTIF worksheet function, with a relative address.
Eg. In cell B2, enter this formula:
=COUNTIF(A$2:A2,A2)
And then fill-down.
Use the following formula to generate the required series:
=COUNTIF($A$1:A1,A1) and strech(copy) it in all the cells
This will generate result like this:
A 1 COUNTIF($A$1:A1,A1)
A 2 COUNTIF($A$1:A2,A2)
C 1 COUNTIF($A$1:A3,A3)
C 2 COUNTIF($A$1:A4,A4)
B 1 COUNTIF($A$1:A5,A5)
B 2 COUNTIF($A$1:A6,A6)
A 3 COUNTIF($A$1:A7,A7)
C 3 COUNTIF($A$1:A8,A8)
D 1 COUNTIF($A$1:A9,A9)
D 2 COUNTIF($A$1:A10,A10)
D 3 COUNTIF($A$1:A11,A11)
D 4 COUNTIF($A$1:A12,A12)
Related
Imagine you have spreadsheet with data in a fixed # of contiguous rows.. let's say row 1 through row 20
Now let's say you have 3 columns of interest.
A, B and C
Column A is a label column.. the data in there are just string labels.. let's say types of canned food.. Tuna, Spam, Sardines, etc.
Column B is our number column.. let's say it is prices. e.g. 2 for Tuna, 5 for Spam and 3 for Sardines. These prices can change often very rapidly.. ok so prices are not the best example but let's imagine that prices change rapidly.
Now Column C is where we want to put the formula.
I would like to have a formula in Column C that will pull the labels from Column A, based on their prices in column B and rank them from highest to lowest.. that is C1 would calculate to "Spam", C2 to "Sardines" and C3 to "Tuna"
right now there are 20 rows of data.. but maybe at some other point there might be 30 or 6 or 40, etc.
So can someone help me out with the formula or at least explain what functions I need to use and the general idea involved? thanks
=IF(A2:A200<>"";SORTBY(A2:A200;B2:B200;-1);"")
You can simply use SORT formula. In this case =SORT(A1:B1000,2,-1) where A1:B1000 is range to be sorted, second parameter 2 is column number from range to sort by, 3rd parameter for order (-1 is desceding).
Place formula in C1 and you will get spilled array.
In column A I have product id's and column B has the number of times the product in column A was quoted.
In column C I have the same product id's (but in different order) and column D has the number of times the product in column C was actually sold.
I want to match them up to add a final column in order to divide sales/quoted in order to get a value of efficiency in sales.
I believe it's an index/match/match but I'm not sure how to set it up.
Please help
Try
=B3/vlookup(A3,C:D,2,false)
In words: take the value in B3 and divide it by the value from column D where column C has the same text as A3.
I have simple problem, but I've not be able to get an answer from searching. I require a column to calculate the number of the nth occurrence of a value. It's best explained in this picture
I require a method to calculate column B.
I'd be very grateful for any help.
Are you looking to merely provide a count of the distinct entries of column A in column B? Or merely add a formula to come up with the table in your link?
If the latter, then the formula to write in cell B2 is:
=COUNTIF(A$2:A2,A2)
then copy/paste it down column B. Note - if your data is both a Date and Time, but the cell is formatted to only display a date, you may not get the results you want. You'd need to interject a new column with a "floor" calculation to round the date/time value to a date (Excel date times are decimal, with integer part dictating the date, and remaining 0.0 -> 1.0 dictating the time of day)
If you just want to derive a table of the counts of distinct entries in column A, then a pivot table will do this for you - simple add a pivot table to cover the data in column A, then select column A into the rows category, and then also drag it into the values category, ensuring the field is set to "Count of". You should then have a table with the distinct entries in your data set in one column, and the count of their occurrences in the other column.
You can use the COUNTIF worksheet function, with a relative address.
Eg. In cell B2, enter this formula:
=COUNTIF(A$2:A2,A2)
And then fill-down.
Use the following formula to generate the required series:
=COUNTIF($A$1:A1,A1) and strech(copy) it in all the cells
This will generate result like this:
A 1 COUNTIF($A$1:A1,A1)
A 2 COUNTIF($A$1:A2,A2)
C 1 COUNTIF($A$1:A3,A3)
C 2 COUNTIF($A$1:A4,A4)
B 1 COUNTIF($A$1:A5,A5)
B 2 COUNTIF($A$1:A6,A6)
A 3 COUNTIF($A$1:A7,A7)
C 3 COUNTIF($A$1:A8,A8)
D 1 COUNTIF($A$1:A9,A9)
D 2 COUNTIF($A$1:A10,A10)
D 3 COUNTIF($A$1:A11,A11)
D 4 COUNTIF($A$1:A12,A12)
I have a sales tracking sheet where column A contains the profit margin of a particular job (i.e.33%), Column C is the profit margin range(i.e. 31-40%), and Column D is the corresponding commission to that specific range identified in Column C (i.e. 31-40% = 3% commission).
What I want is a formula that will automatically pull the Commission from Column D into Column B when I enter the profit margin of that particular job in Column A.
Any ideas/does that make sense?
Assuming that the values in column A are formatted as percentage, you could use something like this:
=INDEX(D$1:D$10,MATCH(A1*100,1*LEFT(C$1:C$10,FIND("-",C$1:C$10)-1),1))
And press Ctrl+Shift+Enter after entering the formula instead of Enter alone.
This will return a value from range D$1:D$10 where the value from A1 (multiplied by 100 to remove the decimals) is less than the lower bound of the margin range in range C$1:C$10.
Change the ranges accordingly.
In B1, put:
=IF(A1=C1,D1,0)
You can obviously change row numbers to work as needed.
The IF statement has 3 parts, the condition:
=IF(A1=C1,
Here I'm testing to see if the expression is TRUE or FALSE. I can do anything I want here, as long as it evaluates to either a True or False condition.
Next, we specify the "True" result, and the "false" result, which are, respectively, what happens when those conditions are met. For the TRUE condition, we just want to use the value in cell D:
D1,
For the FALSE condition, I don't know what you want, so I just put in a 0.
0)
Note that all 3 parts of the IF statement are separated by commas - play around, you can do a LOT of different things!
EDIT: Just noticed that column C is a range, while A is a singular value. You're going to need to do something like #Jerry did with parsing out the range string.
I am assuming that columns A and B will be indefinitely long just based on how much data is collected, whereas columns C and D are just a reference table with 10 rows each for the 10 ranges (0 - 10%, 11 - 20%, 21 - 30%, etc.). Is this correct?
As an alternative to storing the profit margin range and corresponding commission in columns C and D as you now do, you could incorporate them directly into an IF statement that you use in column B. For example if 91-100% corresponds to 8% commission, 81-90% is 7% commission and so on, then you could insert this formula:
=IF(A2>90,0.08,IF(A2>80,0.07,IF(A2>70,0.06,IF(A2>60,0.05, ...
The advantage to this compared to using and index-match combination which references numbers extracted from the text ("11-20%"), is that you don't run the risk of losing data when the text ranges are altered in some way. (I.e. userproof.)
I have two Tables, Table 1 Column A is a rolling date column. Table 2 consists of four columns of differing "Trigger Dates". Table 2, Column 1 contains an Annual trigger, ie occurs once a year. Table 2 Column 2 contains Bi-Annual Triggers, and occurs twice yearly. Table 2 Column 3 contains Monthly Triggers, "12 dates" and Table 2 Column 4 contains Weekly Triggers, "52 dates".
Ok, so what I'm looking for is to a formula that will return the date trigger, where Table 1 Column 1 matches a condition (Annually, Bi-Annually, Monthly, Weekly) selected in a cell "we'll say F1, outside of any ranges that may be created.
Example: If Table 1 Col 2 = "01/02/2013" and I select "Weekly" in F1, the formula will look in the weekly Column in Table 2 to determine if "01/02/2013" exists.
I've allocated a named range to each column in Table 2
I've allocated a named range to the condition in F1 which is a drop down list
Any suggestions?
You might try:
=IFERROR(VLOOKUP(B2,INDIRECT(CHAR(72+MATCH(F$1,$I$1:$L$1,0))&":"&CHAR(72+MATCH(F$1,$I$1:$L$1,0))),1,0),"")
Ok, so supposing your Range Name is in F1, your formula to find the match would look as follows:
=If(IsError(Match(LookupVal,Indirect(F1),0)),"No Match", "Match")
...Something along those lines
Hope this helps point you in the right direction.
INDIRECT and VLOOKUP will be your friends here.
I constructed Table2 just as you had described, with the Annual,Bi-annual,Monthly,Weekly labels for the columns in the table - this will avoid having to keep named ranges up to date, as it's looking directly at the table in the formula
For the function, I then used VLOOKUP to find the date, in the column referenced by F1.
Column Reference: INDIRECT("Table2["&$F$1&"]")
Find Value: VLOOKUP([#Col2],INDIRECT("Table2["&$F$1&"]"),1,FALSE) (looking at column 1 in the return values, as I don't really care what value is returned.
This will return the date if found, and an error if not. I can then wrap the result in the IF(ISERROR( so I can return Yes or No if the date is found.
This produces the entire formula of
=IF(ISERROR(VLOOKUP([#Col2],INDIRECT("Table2["&$F$1&"]"),1,FALSE)),"No","Yes")
for the next column in Table1, so that when I change the value in F1, it will look for that column name in Table2, and let me know if it is found.