I've read this How to make vim paste from (and copy to) system's clipboard? and I know what the hotkeys are. But I'm unable to execute any of those commands. For example, what exactly should I press to call
"* or "+? In which mode also? I've tried different things and none of them worked.
I am assuming you've double-checked that :echo has('clipboard') returns 1. If it returns 0, you're out of luck since vim isn't compiled with access to the system clipboard.
If you have clipboard powers, then yanking and pasting inside of vim is done with pressing just the letter y and the letter p, in normal mode. Start doing this first, to confirm that you can yank and paste inside of vim. For instance, yank a line: yy and paste it p.
Next, confirm that you can yank inside of vim to the system clipboard with "*y. (That means pressing the double-quote (shift-'), then an asterix (shift-8), then the letter y, all in quick-ish succession. Toggle over to another app and paste with the regular control-V. (You may be able to look at the bottom left of status line to see what you are literally typing, which might help).
If that works, then the clipboard functionality is "good to go." If it doesn't you might need to tweak your .vimrc to get things working. Try setting the clipboard to unnamed: set clipboard=unnamed and retest step 3 again.
I want to select all the text from the vim editor, I tried the command :%y+ but getting error E850: Invalid register name. I get this command from this link. Please help me how to copy all the text from file which is open in vim. They are using yank, what is meaning of it..
I had a similar problem. Don't know why you got so many down votes.
The problem is that you haven't installed vim-gnome which takes about 24 MB and adds a feature to the inbuilt vim.
sudo apt-get install vim-gnome
then your command will work. :%y+ This command will copy all the text in system's clipboard.
TLDR: If you want to copy text in Vim to the system clipboard type ggVG"*y. Explanation below...
Vim runs in the terminal and, depending upon how you are using it and which type of Vim you are running, it's not really designed for you to select text with a mouse and copy and paste in the traditional way.
If you want to select all of the text using Vim then use ggVGy (note the uppercase VG in the middle). This command moves the cursor to the top of the file, enters visual mode, moves to the bottom of the file (thus, selecting all of the text) and then yanks (copies) it. You can then use p to put (paste) this code but only inside of Vim.
If you want to copy to the clipboard to use somewhere outside of Vim then try this:
First, select everything using the commands outlined above but without the final y: (ggVG). Then press "*y. This should now copy it to your operating system's clipboard and you can just paste (Ctrl/Cmd+v) anywhere you want outside of Vim. This can vary depending on what settings you have for Vim but it should work.
A brief explanation of the commands used. gg goes to the top of the file. V enters visual mode by lines. G goes to the end of the file. y yanks (copies) the text but not to the clipboard. p puts (pastes) the text.
The more advanced (i.e. cool) stuff:
" allows you to access registers. For example "a provides access to register a.
The * is the system clipboard so "* provides access to the system keyboard. Therefore, "*y yanks into the system clipboard.
While there's a great explanation of how to exploit the system clipboard in vim, it sounds like you're just having trouble getting your vim to access the clipboard in the first place. Try installing vim-gnome, it gives you the packages you need to get to the system clipboard.
For some reason, "* didn't work for me, but the exact same command with the "+ register did.
To select the whole file you can jump to the beginning, start visual mode, jump to the end:
ggVG
This question is a few years old now, but I had this same problem on Linux Mint 18. I found using xclip worked for me. You can map the command vmap <F7> :!xclip -sel c<CR><CR> in your .vimrc to have your current selection in visual mode copied to the system clipboard.
Here is a thread containing the above (and other) solutions.
You can use
Vggy/vggy or,
VGy/VGy
To visually select any number of text and then copy it, in your case it is gg / G as you want all text on the file,
gg is to copy while your cursor is at bottom of the file, gg for go to top
G is to copy while your cursor is at top of the file
Or even you can always use
Vk(as number of time)y to copy the selected lines of text.
I'm new to vim and I'm using gVim on Windows. I have two windows open in the same gvim instance and I'm just trying to copy some code from one to another. For some reason when it pastes it replaces the contents of some code with literally this:
list.forEach(function(name){...}------------------------------------------
Obviously, my real code does not have ... or a ton of dashes. What the hell is happening?
The dashes (----------) give it away: The block of code has been folded. (You probably also see the line with different colors (depending on your colorscheme).) Depending on the filetype, folding can be manual or automatic. For your (JavaScript?) code, it's the latter. So when you paste a block of code, Vim automatically detects the block and folds it.
There's a whole lot of commands and options around folding. Read more about it at :help folding. If you find this too confusing (for now), turn it off via
:set nofoldenable
Just press zo on the dashes(-----)
Aside: Use zf on selected (v) lines to fold lines.
zo - Open
zo - Fold
I copy some code from one part of one file to another part in vim, I find that, there are line numbers in each line and the format is gone, how to set correct format as origin ?
like this:
40 root /opt/release/current/public;
67 41 passenger_enabled on;
68 42
If you have line numbers, I'm quite sure you are not using Vim's yank/put operations (these will never copy the linenumbers, foldcolumn, icons etc) because in terms of the edit buffer, they don't exist.
My guess is you are working in a terminal emulator and using the mouse to copy stuff to the clipboard, which possibly selects the 'extraneous' room of the screen (including virtual spaces at the end, line numbers, fold markers etc)
You might have luck setting
:se mouse+=a
in order to get the behaviour of the mouse like you expect it. Otherwise, do the selection with V<movement>...y (y for yank, which corresponds to 'copy')
Then on the destination use p (put at cursor), or P (put before cursor)
Let me know if that helped or you need more info
In case anyone wants a quicker way (on Linux anyways), I have noticed in vim you can hold down ctrl and drag over the region you want to copy and you'll avoid the line numbers and select the part you want.
Steps:
ctrl and drag over area
release ctrl
copy (either keyboard shortcut or right click)
In normal mode, type :se nonu
This is the easiest way to remove the line numbers and you will be able to copy the text without the line numbers.
A permanent solution for this is to add the below code at the end of your .vimrc file located in your home directory.
se mouse+=a
By adding this you will be able to select only text and not the line numbers as shown in below image:
If you are not getting your .vimrc file in your home directory (i faced this problem), type the command :scriptnames in vi editor, it will display the location of your .vimrc file. Reference
On Mac: I found out that you can select the desired area with Option+Command and copy paste it to another editor.
All the previously entered solution are very good one. However, sometimes your are using vim on a remote server (so you cant copy to your clipboard using "+y). Often terminals support copy paste operation.
I use vim to output visual selection to a new shell where I can copy text using terminal feature:
:'<,'>w ! bash -c cat
Then I can easily copy the output.
Same pattern for pasting in vim:
:r ! bash -c cat
Then I paste and send EOF to cat using Ctrl+d. This method also avoid reindenting the text you paste (Note: you can disable automatic indentation using :set pi!).
Have a look at the pastetoggle option sometimes set to F11.
As an alternative you could always write the section you want to copy into a temporary file
(ma, goto end line then use :'a,.w tempfile) then read it into the second file.
For further investigation you might want to look at the autoindent option.
On Windows VIM GUI: :set nu and then hold down Ctrl-Shift while
highlighting the desired text with the mouse. This yanks the line numbers
into the buffer.
On Windows using Putty, I have noticed in vim you can hold down ALT and drag over the region you want to copy and you'll avoid the line numbers and select the part you want.
Steps:
Press and Hold ALT
Drag over area
Release ALT
Copy using CTRL+Shift+C (or right click if that is turned on)
Variations:
The specific key may be different based on your specific set up.
If ALT does not work, try the following keys instead:
CTRL
CTRL+Shift
ALT+Shift
Note:
If anyone knows of any other key combinations that have worked for them let me know and I will update this answer with them.
I mapped the below command to a key.
It strips the whitespace around the copied line numbers.
It ignores the line text and any blank lines behind.
:1,$s/^\s*[0-9]\+\s//\|1,$s/^\s*[0-9]\+\n/\r/<cr>
You can also consider using sed and pbcopy to copy the lines to a clipboard, where you can paste to another terminal or apps outside of vim.
sed -n <line start #>,<line end #>p <file name> | pbcopy
simplest way just: $ cat "your file"
and then just copy it from your terminal without numbers
I am making the effort to learn Vim.
When I paste code into my document from the clipboard, I get extra spaces at the start of each new line:
line
line
line
I know you can turn off auto indent but I can't get it to work because I have some other settings conflicting or something (which look pretty obvious in my .vimrc but don't seem to matter when I take them out).
How do I turn off auto indenting when I paste code but still have vim auto indent when I am writing code? Here is my .vimrc file:
set expandtab
set tabstop=2
set shiftwidth=2
set autoindent
set smartindent
set bg=dark
set nowrap
Update: Better answer here: https://stackoverflow.com/a/38258720/62202
To turn off autoindent when you paste code, there's a special "paste" mode.
Type
:set paste
Then paste your code. Note that the text in the tooltip now says -- INSERT (paste) --.
After you pasted your code, turn off the paste-mode, so that auto-indenting when you type works correctly again.
:set nopaste
However, I always found that cumbersome. That's why I map <F3> such that it can switch between paste and nopaste modes while editing the text! I add this to .vimrc
set pastetoggle=<F3>
To avoid undesired effects while pasting, there is an option that needs to be set:
set paste
A useful command to have in your .vimrc is set pastetoggle=<F10> or some other button, to easily toggle between paste and nopaste.
I usually use :r! cat and then paste ( shift + insert ) the content, and CTRL+D.
No need to enable & disable, direct usage.
If you are working locally, you can paste from the system clipboard with the key sequence:
"+p
This is a proper vim command, so no need to worry about entering an insert mode or switching off autoindent first.
Of course if you are working remotely (console over SSH, for example) then this won't work and you should go the :set noai, insert mode, paste into console, leave insertmode, :set ai route as described elsewhere.
While setting the paste mode with paste/nopaste/pastetoggle is perfectly fine, you still have to manually enable paste mode before pasting and disable paste mode after pasting. Being the lazy person that I am, below is the best solution that I've found so far, which automatically toggles the paste mode when you paste.
Here's a little trick that uses terminal's bracketed paste mode to
automatically set/unset Vim's paste mode when you paste. Put following
in your .vimrc:
let &t_SI .= "\<Esc>[?2004h"
let &t_EI .= "\<Esc>[?2004l"
inoremap <special> <expr> <Esc>[200~ XTermPasteBegin()
function! XTermPasteBegin()
set pastetoggle=<Esc>[201~
set paste
return ""
endfunction
Now you can paste without explicitly turning paste mode on/off - it is
handled automatically for you.
Source: Coderwall
Note: This solution doesn't work in WSL (Windows 10 Subsystem for Linux). If anyone has a solution for WSL, please update this answer or add it in the comments.
Tmux If using tmux, then the declarations need to be double escaped. The code for this is also in Coderwall
Mac users can avoid auto formatting by reading directly from the pasteboard with:
:r !pbpaste
Here is a post by someone who figured out how to remap the paste event to automatically turn paste mode on and then back off. Works for me in tmux/iTerm on MacOSX.
I just put set clipboard=unnamed in my .vimrc. That makes the default paste buffer map to X's clipboard.
So, if I mark a bit of text in a terminal, I can simply press p to paste it in vim. Similarly, I can yank things in vim (e.g. YY to yank the current line into the buffer) and middle click in any window to paste it.
I don't know. I find it super convenient.
Add this to your ~/.vimrc and you will only have to press F2 before and after pasting:
set pastetoggle=<F2>
I am a Python user who sometimes copy and paste into Vim. (I switched from Mac to Windows WSL) and this was one of the glitches that bothered me.
If you touch a script.py and then vi script.py, Vi will detect it is a Python script and tried to be helpful, autoindent, paste with extra indents, etc. This won't happen if you don't tell it is a Python script.
However, if that is already happening to you, the default autoindent could be a nightmare when you paste already fully indented code (see the tilted ladder shape below).
I tried three options and here are the results
set paste # works perfect
set noai # still introduced extra whitespace
set noautoindent # still introduced extra whitespace
When working inside a terminal the vim-bracketed-paste vim plugin will automatically handle pastes without needing any keystrokes before or after the paste.
It works by detecting bracketed paste mode which is an escape sequence sent by "modern" x-term compatible terminals like iTerm2, gnome-terminal, and other terminals using libvte. As an added bonus it works also for tmux sessions. I am using it successfully with iTerm2 on a Mac connecting to a linux server and using tmux.
Another answer I did not see until now:
:se paste noai
Stick this in your ~/.vimrc and be happy:
" enables :Paste to just do what you want
command Paste execute 'set noai | insert | set ai'
Edit: on reflection, :r !cat is a far better approach since it's short, semantic, and requires no custom vimrc. Use that instead!
Another way to paste is via <C-r> in insert mode and dropping the contents of the register (here the global register). See: :h i_ctrl-r and h i_CTRL-R_CTRL-O.
From the vim help documentation:
Insert the contents of a register literally and don't auto-indent. Does the same as pasting with the mouse. Does not replace characters! The '.' register (last inserted text) is still inserted as typed.{not in Vi}
So to paste contents into vim without auto indent, use <C-r><C-o>* in most unix systems.
You can add a mapping in the your vimrc inoremap <C-r> <C-r><C-o> so you can paste the contents of the * register normally without the auto indent by using <C-r>*.
Note: this only works if vim is compiled with clipboard.
Although :pastetoggle or :paste and :nopaste should be working fine (if implemented - they are not always as we can see from the discussion) I highly recomment pasting using the direct approach "+p or "*p and reading with "+r or "*r:
Vim has acess to ten types of registers (:help registers) and the questioner is interested in quotestar and quoteplus from section
Selection and drop registers "*, "+ and "~
Use these registers for storing and retrieving the selected text for the GUI.
See quotestar and quoteplus. When the clipboard is not available or not
working, the unnamed register is used instead. For Unix systems the clipboard
is only available when the +xterm_clipboard feature is present. {not in Vi}
Note that there is only a distinction between "* and "+ for X11 systems.
:help x11-selection further clarifies the difference of * and +:
quoteplus quote+
There are three documented X selections: PRIMARY (which is expected to
represent the current visual selection - as in Vim's Visual mode), SECONDARY
(which is ill-defined) and CLIPBOARD (which is expected to be used for
cut, copy and paste operations).
Of these three, Vim uses PRIMARY when reading and writing the "* register
(hence when the X11 selections are available, Vim sets a default value for
'clipboard' of "autoselect"), and CLIPBOARD when reading and writing the "+
register. Vim does not access the SECONDARY selection.
Examples: (assuming the default option values)
Select an URL in Visual mode in Vim. Go to your browser and click the
middle mouse button in the URL text field. The selected text will be
inserted (hopefully!). Note: in Firefox you can set the
middlemouse.contentLoadURL preference to true in about:config, then the
selected URL will be used when pressing middle mouse button in most places in the window.
Select some text in your browser by dragging with the mouse. Go to Vim and
press the middle mouse button: The selected text is inserted.
Select some text in Vim and do "+y. Go to your browser, select some text in
a textfield by dragging with the mouse. Now use the right mouse button and
select "Paste" from the popup menu. The selected text is overwritten by the
text from Vim.
Note that the text in the "+ register remains available when making a Visual
selection, which makes other text available in the "* register. That allows
overwriting selected text.
This works for me ( case for + register, what i use like exchange buffer between aps ):
imap <silent> <S-Insert> <C-O>:set noai<CR><C-R>+<C-O>:set ai<CR>
From vim: ]p
From outside: "*]p or "+]p
This issue has already been answered, but I though I could also add my own solution:
If you simply want to disable auto-indent system wise, for every file type (basically, disable the auto-indent feature completely), you can do the following:
Backup the indent.vim file:
sudo mv /usr/share/vim/vim81/indent.vim /usr/share/vim/vim81/indent.vim.orig
Create a new empty indent.vim file:
sudo touch /usr/share/vim/vim81/indent.vim
If you are on a mac, macvim seems to handle it well without having to toggle paste.
brew install macvim --override-system-vim
Please read this article: Toggle auto-indenting for code paste
Some people like the visual feedback shown in the status line by the following alternative for your vimrc:
nnoremap <F2> :set invpaste paste?<CR>
set pastetoggle=<F2>
set showmode
The fastest way I’m aware of to quickly go to paste-insert mode for a one-shot paste is tpope’s unimpaired, which features yo and yO, presumably mnemonics for “you open”. They’re only documented in his vimdoc, as:
A toggle has not been provided for 'paste' because the typical use case of
wrapping of a solitary insertion is so wasteful: You toggle twice, but
you only paste once (YOPO). Instead, press yo or yO to invoke o or O with
'paste' already set. Leaving insert mode sets 'nopaste' automatically.
Native paste / bracketed paste is the best and simplest way since vim 8 (released in 2016). It even works over ssh! (Bracketed paste works on Linux and Mac, but not Windows Git Bash)
Make sure you have vim 8+ (you don't need the +clipboard or +xterm_clipboard options).
vim --version | head -1
Simply use the OS native paste command (e.g. ctrl+shift+V or cmd+V) in Normal Mode. Do not press i for Insert Mode.
Test
Copy (ctrl+shift+C or cmd+C) the output of this (2 lines with a tab indent) to the system clipboard:
echo -e '\ta\n\tb'
Launch a clean vim 8+ with autoindent:
vim -u NONE --noplugin -c 'set autoindent'
Paste from the system clipboard (ctrl+shift+V or cmd+V) in Normal Mode. Do not press i for Insert Mode. The a and b should be aligned with a single tab indent. You can even do this while ssh-ing to a remote machine (the remote machine will need vim 8+).
Now try the old way, which will autoindent the second line with an extra tab: Press i for Insert Mode. Then paste using ctrl+shift+V or cmd+V. The a and b are misaligned now.
Installing Vim 8
Ubuntu 18.04 - comes with Vim 8 by default.
Ubuntu 16.04 - install from a PPA.
sudo add-apt-repository ppa:jonathonf/vim
sudo apt update
sudo apt install vim
Mac: brew install vim
The following vim plugin handles that automatically through its "Bracketed Paste" mode: https://github.com/wincent/terminus
Sets up "Bracketed Paste" mode, which means you can forget about manually setting the 'paste' option and simply go ahead and paste in any mode.
Sadly I found the vim plugin mentioned not to be working with iTerm2 3.0.15 (to be fair I don't know if this broke on older versions) - but I found this hack instead.
Map command-p to do the paste and using iTerm2 vim keys. Obviously this only works for iTerm2.
How it works. I use "jk" to enter escape mode so you will also need:
:inoremap jk
in your .vimrc.
Then it just invokes P to enter paste mode, "+p to paste from the clipboard and then P to disable paste mode. hth.
If you use the vim above v8.2, you can check with :help tmux-integration.
If you experience issues when running Vim inside tmux, here are a few hints.
You can comment-out parts if something doesn't work (it may depend on the
terminal that tmux is running in):
if !has('gui_running') && &term =~ '^\%(screen\|tmux\)'
" Better mouse support, see :help 'ttymouse'
set ttymouse=sgr
" Enable true colors, see :help xterm-true-color
let &termguicolors = v:true
let &t_8f = "\<Esc>[38;2;%lu;%lu;%lum"
let &t_8b = "\<Esc>[48;2;%lu;%lu;%lum"
" Enable bracketed paste mode, see :help xterm-bracketed-paste
let &t_BE = "\<Esc>[?2004h"
let &t_BD = "\<Esc>[?2004l"
let &t_PS = "\<Esc>[200~"
let &t_PE = "\<Esc>[201~"
" Enable focus event tracking, see :help xterm-focus-event
let &t_fe = "\<Esc>[?1004h"
let &t_fd = "\<Esc>[?1004l"
" Enable modified arrow keys, see :help xterm-modifier-keys
execute "silent! set <xUp>=\<Esc>[#;*A"
execute "silent! set <xDown>=\<Esc>[#;*B"
execute "silent! set <xRight>=\<Esc>[#;*C"
execute "silent! set <xLeft>=\<Esc>[#;*D"
endif