I am creating a pipeline that only runs a simple "wait ", just for testing, because I am trying to understand why my others pipeline are returning errors (the same error).
When I try to debug, it sends the following error:
{
"code": "BadRequest",
"message": "Operation could not be completed as factory is deleted",
"target": "pipeline/Teste_ParaApagar/runid/f0e412a9-21a2-4d0f-ab28-c0287a484326",
"details": null,
"error": null
}
I searched everywhere, I can´t find answer. Can you please help?
I think this is not a common error.
According to the policy, I think you should check your account to see if your ADF was disabled.
Related
I received the below error on Synapse pipeline. I am running pipeline with more cluster size with memory optimized clusters. I am just processing 7-8 JSON files of around 90MB of size each.
Error
{ "errorCode": "145", "message": "Internal Server Error in Synapse
batch operation: '[plugins.C4T-PRIV-SAW-CAS.IR-Test.19
WorkspaceType: CCID:]
[Monitoring] Livy Endpoint=[
https://hubservice1.westeurope.azuresynapse.net:8001/api/v1.0/publish/c1e53348-b457-4afd-a61d-76553bdd369c
]. Livy Id=[4] Job failed during run time with state=[dead].'.",
"failureType": "SystemError", "target": "DF_Load_CustomsShipment",
"details": [] }
The internal server errors are mostly noticed when there is an intermittent/transient issue with the dependent service.
If the issue is not auto resolved or you still experience the issue consistently, I would recommend raising a support ticket for the support engineer to investigate.
I'm still new in Azure.
Today, I try to create an azure function instance
but, everytime I try to create one I get a Bad Request Error
{
"status": "Failed",
"error": {
"code": "BadRequest",
"message": "Cannot update the site '{project-name}' because it uses x64 worker process which is not allowed in the target compute mode.",
"details": [
{
"message": "Cannot update the site '{project-name}' because it uses x64 worker process which is not allowed in the target compute mode."
},
{
"code": "BadRequest"
},
{}
]
}
}
I have no idea what it does mean. So, can you give me an Idea what's wrong? and How I supposed to do to fix it?.
The Free/Shared tiers only support 32-bit application architecture. You'll need Basic or higher to use 64-bit.
I have an issue where Azure Data Factory Integration runtimes will not start.
When I trigger the pipeline I get the following error in Monitor -> Pipeline runs "InternalServerError executing request"
Image 1
In "view activity run" I can see that it's the Data Flow that failed with the error
{
"errorCode": "1006",
"message": "Hit unexpected exception and execution failed.",
"failureType": "SystemError",
"target": "data_wrangling_ks",
"details": []
}
Image 2
(the two successful runs are from a Self-Hosted IR)
When i try to start "Data flow debug" it will just disappear without any information.
This issue started earlier today without any changes in Data Factory config or the pipeline.
Please help and thank you for your time.
SOLVED:
I changed the Compute type from General Purpose to Compute Optimized and that solved the problem.
By looking at the error message, it seems like this issue has occurred due ADF related service outage in West Europe region. The issue has been resolved by the product team. Please open a MSDN thread if you ever encounter this issue.
Ref: Azure Data Factory Pipeline failed while running data flows with error message : Hit unexpected exception and execution failed
I'm trying to create a Service catalog managed application definition and get the following error :{
"error": {
"code": "InternalServerError",
"message": "Encountered an internal server error. The tracking id is '5d5bf382-f101-48d7-bd89-72c72536a4a9'."
}
}
Is there anyway to find out what causes this? I did come across before. And believe it might be something to do with the template. I've tested the following using visual studio and the deployments works correctly. Just uploading the app.zip with the templates causes this error.
You can either look at the Azure Portal and go to Event Monitor and find error records and discern from the text there what went wrong or use Get-AzureRmLog -CorrelationId GUID_goes_here and look from there.
I am currently writing a script in nodejs to pull all DriveItems from the MS Graph API, the idea is to grab the permissions of each DriveItem so that a record can be kept and presented to the user. Our authentication with Graph is app based.
I am running asynchronous requests to MS graph which obviously results in a lot of simultaneous requests. After a few seconds of executing the script, MS graph starts returning the following errors from the endpoint and doesn't seem to recover. The status codes are a 500 internal server error, 504 gateway timeout, and 404 not found.
The number of errors returned isn't always the same; one request returns 856 failed requests, another returns 900.
Here are the different responses received from endpoints which represent true drives and driveitems:
Endpoint: https://graph.microsoft.com/v1.0/drives/(drive_id)/items/(driveitem_id)/permissions
500 Internal server error:
{
"error": {
"code": "-2146232060, Microsoft.SharePoint.SPException",
"message": "Exception from HRESULT: 0x80131904",
"innerError": {
"request-id": "794863b8-bbf1-4866-9604-f8fcec4afabe",
"date": "2016-11-18T05:41:35"
}
}
}
504 Gateway timeout:
{
"error": {
"code": "UnknownError",
"message": "",
"innerError": {
"request-id": "e91c3037-10b6-4523-88d3-7fc31107b719",
"date": "2016-11-18T05:46:21"
}
}
}
404 Not found error:
{
"error": {
"code": "itemNotFound",
"message": "The resource could not be found.",
"innerError": {
"request-id": "b9a8286d-ce8c-4353-b8f0-818fe0f609ea",
"date": "2016-11-18T05:41:35"
}
}
}
This errors occur for a period of time and then everything seems to work fine again.
I can confirm that these endpoints work fine when I use postman to get an individual endpoint and the same token as the script - it returns valid data. Also if I make the script synchronous, it works fine but this is not an acceptable solution as it is far too slow to process the thousands of files I am dealing with.
The only thing I can think of that would be a problem is the sheer amount of simultaneous requests happening? However I am not receiving a 429 too many requests error back from msgraph before this starts to happen.
Any help is greatly appreciated.