Below is my requirement. I have a text file that has following content
File name - abc.txt
Content -
apple=0
mango=1
strawberry=10
I need to kick off the subsequent process only if any of the above stated variable has non zero values.
In this case, As two variables have values 1 and 10 respectively, I need to update an indicator - SKIP INDICATOR=N
If all variables have 0 as value, I need to update SKIP INDICATOR=Y
How to achieve this functionality in Linux. Kindly advise.
with very simple greps :
if [ $(grep '=' your_file | grep -v '=0') ]
then
echo "non zero values detected"
SKIP_INDICATOR=N
else
echo "all are zeroes"
SKIP_INDICATOR=Y
fi
Just note that this is a quick and dirty solution and it would NOT work properly if you have for example a=01 or a= 0 (eg with space)
Try:
grep -q '=0*[1-9]' textfile && skip_indicator=N || skip_indicator=Y
=0*[1-9] matches an '=' character followed by zero or more '0' characters followed by a digit in the range 1 to 9.
See Correct Bash and shell script variable capitalization for an explanation of why I changed SKIP_INDICATOR to skip_indicator.
#!/bin/bash
flag=`awk -F'=' '$NF!="0"{print;exit}' input`
if [ ! -z $flag ] ; then
SKIP_INDICATOR=N
echo "some variable value is different from 0. do something"
else
SKIP_INDICATOR=Y
echo "all variables have 0 as value. do another thing."
fi
exit 0
I wrote simple script as follow
#!/bin/bash
auth_type=""
SM_Read-only="Yes"
SM_write-only="No"
echo -e ${SM_Read-only}
echo -e ${SM_Write-only}
if [ "${SM_Read-only}" == "Yes" ] && [ "${SM_Write-only}" == "Yes" ]
then
auth_type="Read Write"
else
auth_type="Read"
fi
echo -e $auth_type
And when i execute it i got following output with errors.
./script.bash: line 5: SM_Read-only=Yes: command not found
./script.bash: line 6: SM_write-only=No: command not found
only
only
Read
Any one know correct way to declare the variable with "-" (dash)?
EDIT:
have getting response from c code and evaluate the variables for example
RESP=`getValue SM_ Read-only ,Write-only 2>${ERR_DEV}`
RC=$?
eval "$RESP"
from above scripts code my c binary getValue know that script want Read-only and Write-only and return value to script.So during eval $RESP in cause error and in my script i access variable by
echo -e ${SM_Read-only}
echo -e ${SM_Write-only}
which also cause error.
Rename the variable name as follows:
SM_Read_only="Yes"
SM_write_only="No"
Please, don't use - minus sign in variable names in bash, please refer to the answer, on how to set the proper variable name in bash.
However if you generate the code, based on others output, you can simply process their output with sed:
RESP=$(getValue SM_ Read-rule,Write-rule 2>${ERR_DEV}|sed "s/-/_/g")
RC=$?
eval "$RESP"
- is not allowed in shell variable names. Only letters, numbers, and underscore, and the first character must be a letter or underscore.
I think you cant have a dash in your variables names, only letters, digits and "_"
Try:
SM_Read_only
Or
SM_ReadOnly
Can someone explain why these echo commands doesn't output [#10] and so on?
# echo [#10]
1
# echo [#11]
1
# echo [#12]
1 2
# echo [#13]
1
# echo [#14]
1
You have a file named "1" and a file named "2" in your current directory.
The shell is performing pattern matching on the glob patterns before handing the results to echo. [#10] is a character class containing a #, a 1 and a 0.
See http://www.gnu.org/software/bash/manual/bashref.html#Pattern-Matching
If you want the literal [#10], etc, you have to enclose it in quotes, single or double doesn't matter.
(to answer the question in your last comment)
You could use the printf(1) command:
printf "Error: %s went wrong. Error code [#%d]\n" "something" $[10+2]
The $[10+2] is here to show how to do arithmetic in shell. You could replace "something" with e.g. $somevariable ...
I've been trying to customize my Bash prompt so that it will look like
[feralin#localhost ~]$ _
with colors. I managed to get constant colors (the same colors every time I see the prompt), but I want the username ('feralin') to appear red, instead of green, if the last command had a nonzero exit status. I came up with:
\e[1;33m[$(if [[ $? == 0 ]]; then echo "\e[0;31m"; else echo "\e[0;32m"; fi)\u\e[m#\e[1;34m\h \e[0;35m\W\e[1;33m]$ \e[m
However, from my observations, the $(if ...; fi) seems to be evaluated once, when the .bashrc is run, and the result is substituted forever after. This makes the name always green, even if the last exit code is nonzero (as in, echo $?). Is this what is happening? Or is it simply something else wrong with my prompt? Long question short, how do I get my prompt to use the last exit code?
As you are starting to border on a complex PS1, you might consider using PROMPT_COMMAND. With this, you set it to a function, and it will be run after each command to generate the prompt.
You could try the following in your ~/.bashrc file:
PROMPT_COMMAND=__prompt_command # Function to generate PS1 after CMDs
__prompt_command() {
local EXIT="$?" # This needs to be first
PS1=""
local RCol='\[\e[0m\]'
local Red='\[\e[0;31m\]'
local Gre='\[\e[0;32m\]'
local BYel='\[\e[1;33m\]'
local BBlu='\[\e[1;34m\]'
local Pur='\[\e[0;35m\]'
if [ $EXIT != 0 ]; then
PS1+="${Red}\u${RCol}" # Add red if exit code non 0
else
PS1+="${Gre}\u${RCol}"
fi
PS1+="${RCol}#${BBlu}\h ${Pur}\W${BYel}$ ${RCol}"
}
This should do what it sounds like you want. Take a look a my bashrc's sub file if you want to see all the things I do with my __prompt_command function.
If you don't want to use the prompt command there are two things you need to take into account:
getting the value of $? before anything else. Otherwise it'll be overridden.
escaping all the $'s in the PS1 (so it's not evaluated when you assign it)
Working example using a variable
PS1="\$(VALU="\$?" ; echo \$VALU ; date ; if [ \$VALU == 0 ]; then echo zero; else echo nonzero; fi) "
Working example without a variable
Here the if needs to be the first thing, before any command that would override the $?.
PS1="\$(if [ \$? == 0 ]; then echo zero; else echo nonzero; fi) "
Notice how the \$() is escaped so it's not executed right away, but each time PS1 is used. Also all the uses of \$?.
Compact solution:
PS1='... $(code=${?##0};echo ${code:+[error: ${code}]})'
This approach does not require PROMPT_COMMAND (apparently this can be slower sometimes) and prints [error: <code>] if the exit code is non-zero, and nothing if it's zero:
... > false
... [error: 1]> true
... >
Change the [error: ${code}] part depending on your liking, with ${code} being the non-zero code to print.
Note the use of ' to ensure the inline $() shell gets executed when PS1 is evaluated later, not when the shell is started.
As bonus, you can make it colorful in red by adding \e[01;31m in front and \e[00m after to reset:
PS1='... \e[01;31m$(code=${?##0};echo ${code:+[error: ${code}]})\e[00m'
--
How it works:
it uses bash parameter substitution
first, the ${?##0} will read the exit code $? of the previous command
the ## will remove any 0 pattern from the beginning, effectively making a 0 result an empty var (thanks #blaskovicz for the trick)
we assign this to a temporary code variable as we need to do another substitution, and they can't be nested
the ${code:+REPLACEMENT} will print the REPLACEMENT part only if the variable code is set (non-empty)
this way we can add some text and brackets around it, and reference the variable again inline: [error: ${code}]
I wanted to keep default Debian colors, print the exact code, and only print it on failure:
# Show exit status on failure.
PROMPT_COMMAND=__prompt_command
__prompt_command() {
local curr_exit="$?"
local BRed='\[\e[0;91m\]'
local RCol='\[\e[0m\]'
PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u#\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
if [ "$curr_exit" != 0 ]; then
PS1="[${BRed}$curr_exit${RCol}]$PS1"
fi
}
The following provides a leading green check mark when the exit code is zero and a red cross in all other cases. The remainder is a standard colorized prompt. The printf statements can be modified to present the two states that were originally requested.
PS1='$(if [ $? -eq 0 ]; then printf "\033[01;32m""\xE2\x9C\x93"; else printf "\033[01;31m""\xE2\x9C\x95"; fi) \[\e[00;32m\]\u#\h\[\e[00;30m\]:\[\e[01;33m\]\w\[\e[01;37m\]\$ '
Why didn't I think about that myself? I found this very interesting and added this feature to my 'info-bar' project. Eyes will turn red if the last command failed.
#!/bin/bash
eyes=(O o ∘ ◦ ⍤ ⍥) en=${#eyes[#]} mouth='_'
face () { # gen random face
[[ $error -gt 0 ]] && ecolor=$RED || ecolor=$YLW
if [[ $1 ]]; then printf "${eyes[$[RANDOM%en]]}$mouth${eyes[$[RANDOM%en]]}"
else printf "$ecolor${eyes[$[RANDOM%en]]}$YLW$mouth$ecolor${eyes[$[RANDOM%en]]}$DEF"
fi
}
info () { error=$?
[[ -d .git ]] && { # If in git project folder add git status to info bar output
git_clr=('GIT' $(git -c color.ui=always status -sb)) # Colored output 4 info
git_tst=('GIT' $(git status -sb)) # Simple output 4 test
}
printf -v line "%${COLUMNS}s" # Set border length
date=$(printf "%(%a %d %b %T)T") # Date & time 4 test
test=" O_o $PWD ${git_tst[*]} $date o_O " # Test string
step=$[$COLUMNS-${#test}]; [[ $step -lt 0 ]] && step=0 # Count spaces
line="$GRN${line// /-}$DEF\n" # Create lines
home="$BLD$BLU$PWD$DEF" # Home dir info
date="$DIM$date$DEF" # Colored date & time
#------+-----+-------+--------+-------------+-----+-------+--------+
# Line | O_o |homedir| Spaces | Git status | Date| o_O | Line |
#------+-----+-------+--------+-------------+-----+-------+--------+
printf "$line $(face) $home %${step}s ${git_clr[*]} $date $(face) \n$line" # Final info string
}
PS1='${debian_chroot:+($debian_chroot)}\n$(info)\n$ '
case "$TERM" in xterm*|rxvt*)
PS1="\[\e]0;${debian_chroot:+($debian_chroot)} $(face 1) \w\a\]$PS1";;
esac
Improved demure answer:
I think this is important because the exit status is not always 0 or 1.
if [ $EXIT != 0 ]; then
PS1+="${Red}${EXIT}:\u${RCol}" # Add red if exit code != 0
else
PS1+="${Gre}${EXIT}:\u${RCol}" # Also displays exit status
fi
To preserve the original prompt format (not just colors),
you could append following to the end of file ~/.bashrc:
PS1_ORIG=$PS1 # original primary prompt value
PROMPT_COMMAND=__update_prompt # Function to be re-evaluated after each command is executed
__update_prompt() {
local PREVIOUS_EXIT_CODE="$?"
if [ $PREVIOUS_EXIT_CODE != 0 ]; then
local RedCol='\[\e[0;31m\]'
local ResetCol='\[\e[0m\]'
local replacement="${RedCol}\u${ResetCol}"
# Replace username color
PS1=${PS1_ORIG//]\\u/]$replacement}
## Alternative: keep same colors, append exit code
#PS1="$PS1_ORIG[${RedCol}error=$PREVIOUS_EXIT_CODE${ResetCol}]$ "
else
PS1=$PS1_ORIG
fi
}
See also the comment about the alternative approach that preserves username color and just appends an error code in red to the end of the original prompt format.
You can achieve a similar result to include a colored (non-zero) exit code in a prompt, without using subshells in the prompt nor prompt_command.
You color the exit code portion of the prompt, while having it only appear when non-zero.
Core 2$ section of the prompt: \\[\\033[0;31;4m\\]\${?#0}\\[\\033[0;33m\\]\$ \\[\\033[0m\\]
Key elements:
return code, if not 0: \${?#0} (specificly "removes prefix of 0")
change color without adding to calculated prompt-width: \\[\\033[0;31m\\]
\\[ - begin block
\\033 - treat as 0-width, in readline calculations for cmdline editing
[0;31;4m - escape code, change color, red fg, underline
\\] - end block
Components:
\\[\\033[0;31;4m\\] - set color 0;31m fg red, underline
\${?#0} - display non-zero status (by removing 0 prefix)
\\[\\033[0;33m\\] - set color 0;33m fg yellow
\$ - $ or # on EUID
\\[\\033[0m\\] - reset color
The full PS1 I use (on one host):
declare -x PS1="\\[\\033[0;35m\\]\\h\\[\\033[1;37m\\] \\[\\033[0;37m\\]\\w \\[\\033[0;33m\\]\\[\\033[0;31;4m\\]\${?#0}\\[\\033[0;33m\\]\$ \\[\\033[0m\\]"
Note: this addresses a natural extension to this question, in a more enduring way then a comment.
Bash
function my_prompt {
local retval=$?
local field1='\u#\h'
local field2='\w'
local field3='$([ $SHLVL -gt 1 ] && echo \ shlvl:$SHLVL)$([ \j -gt 0 ] && echo \ jobs:\j)'"$([ ${retval} -ne 0 ] && echo \ exit:$retval)"
local field4='\$'
PS1=$'\n'"\e[0;35m${field1}\e[m \e[0;34m${field2}\e[m\e[0;31m${field3}\e[m"$'\n'"\[\e[0;36m\]${field4}\[\e[m\] "
}
PROMPT_COMMAND="my_prompt; ${PROMPT_COMMAND}"
Zsh
PROMPT=$'\n''%F{magenta}%n#%m%f %F{blue}%~%f%F{red}%(2L. shlvl:%L.)%(1j. jobs:%j.)%(?.. exit:%?)%f'$'\n''%F{cyan}%(!.#.$)%f '
Images of prompt
I am trying to verify that the format of a variable is a number and is at least 10 digits long with leading zeros, inside of an expect script.
In a bash script it would look something like this:
[[ "$var" != +([0-9]) ]] && echo "bad input" && exit
while [[ $(echo -n ${var} | wc -c) -lt 10 ]] ; do var="0${var}" ; done
For the following input:
16
I am trying to achieve the following output:
0000000016
The simplest way to check whether a variable has just digits is to use a regular expression. Expect's regular expressions are entirely up to the task:
if {![regexp {^\d+$} $var]} {
puts "bad input"
exit
}
Padding with zeroes is best done by formatting the value; if you know C's printf(), you'll recognize the format:
set var [format "%010d" $var]
Expect is actually just an extension of TCL, so you can use any facility that TCL provides. TCL is an unusual language, but it's not hard to do what you want.
# Set a test string.
set testvar 1234567890
# Store the match (if any) in matchvar.
regexp {\d{10,}} $testvar matchvar
puts $matchvar
# Test that matchvar holds an integer.
string is integer $matchvar
The string is command is relatively new, so you might have to rely on the return value of regexp if your TCL interpreter doesn't support it.