Playing with Azure App Service, I instantiated a simple web app. I tried to identify its IP address and found one in the properties of my app. It was described as 'virtual IP address'.
Trying to ping it or put it in my browser, it doesn't work and I can't find if it's an Azure configuration or a principle of virtual IP addresses... To be more precise, if I type '40.79.130.128' in my search bar, I crash on a 404 page, instead of my website page.
I read a bit on the topic, mainly what it is used for, but I don't understand if I can just reach it in my browser, because just typing it in my search bar is no use. What am I missing?
The Virtual IP address under your App Service on the blade Settings->Properties is the Shared IP.
The way IP address work in App Service is different. App Service app runs in an App Service plan, and App Service plans are deployed into one of the deployment units in the Azure infrastructure which is internally called a webspace and each of the deployment unit is assigned up to five virtual IP addresses, which includes one public inbound IP address and four outbound IP addresses.
All App Service plans in the same deployment unit, and app instances that run in them, share the same set of virtual IP addresses which means many App Services is behind same IP address hence you need to configure Custom Domain on your App Service to get it to work.
For configuring Custom domain refer to this link:
https://learn.microsoft.com/en-us/azure/app-service/app-service-web-tutorial-custom-domain
Please refer to below articles for details:
Inbound and outbound IP addresses in Azure App Service
App Service networking features
Related
Our website is hosted on the Azure Linux web app, the site pulls data from third-party vendors. So we need to whitelist our website IP address to their server but after adding the IP for whitelisting still getting 401 unauthorized errors.
We checked the vendor and the IP has been configured properly but why we are getting 401 errors while pulling data via API call.
The IP address we found from Azure Portal --> web app --> select properties and the virtual IP address.
Any help or recommendation will be helpful.
If I understand you correctly, you are trying to whitelist the web app against the firewall for the third-party vendors app?
If so, then the virtual IP address that you have added is the ingress IP address for the web app. You need to add the outbound IP addresses from the Properties blade for the web app to the vendor's firewall.
You should note that there can be up to 11 of these IP addresses. Also, if you scale the web app up or down to a different service plan, or perform any change that will result in a new scale plan, the IP addresses will change. This does not apply to scaling out to multiple instances.
Using a static IP address solved the problem.
I have a question regarding the IP address of my web application.
I deployed my app to azure. The application (API) has been successfully deployed to azure web service and for a client to make a request to the API, the IP address of the app is needed. In azure portal under properties I can find the virtual IP address (e.g. 20.10.200.5 typing it to the browser gives 404) and outbound API addresses.
How to make the API's virtual IP address reachable by clients ?
As an addition to Stanley's answer:
The App Service gets its own URL in the form of <appservice-name>.azurewebsites.net which can be used to access the application / API. You can also Map an existing custom DNS name to Azure App Service making the application / API available through your own domain, like yourdomain.com/api.
Unfortunately, you can't access an Azure App service directly by virtual IP. Virtual IP is bind to the App service plan, one App service plan could contain multiple Azure App services. App service plan maps the domain name with the individual app services, so using a virtual IP is not possible to do that.
I have created one Web app on Azure portal and its integrated with subnet under specific VNET.
Now, when I am trying to do telnet to one of my organisation's internal relay server IP from my web app its not getting connected. The request is going from web app's APIPA address range not from subnet's address range. I checked the IP as well of the web app using ifconfig and I found out that its taking from APIPA address range not from subnet one.
Any idea what steps do I need to take so that web app will take IP from subnet address range of the VNET not from APIPA address range.
Thanks in advance.
After my validation, when the app service on Linux is integrated with a virtual network. There is an extra NIC binding to the app service. It's IP address from APIPA address range. It looks like a design behavior as the app service on Linux is running in a standard Docker Container, read here. Also, for a normal app service is a multi-tenant environment, you can not get a dedicated IP address unless you are using a dedicated environment---ASE, read here.
Furthermore, from how regional VNet Integration works, you will see the app service integrated with a vNet is not the same as a VM from a VNet.
Regional VNet Integration works by mounting virtual interfaces with
addresses in the delegated subnet. Because the from address is in your
VNet, it can access most things in or through your VNet like a VM in
your VNet would. The networking implementation is different than
running a VM in your VNet. That's why some networking features aren't
yet available for this feature.
In this case, if you wan assign a private IP address for app service, you can use Azure Private Endpoint with web apps(Preview). Read this blog for more details.
Azure Private Endpoint provides private IP address access by using a
network interface controller (NIC) attached to a virtual network
subnet for an Azure web app, allowing access from an on-premise VPN or
ExpressRoute. Implementing an endpoint effectively blocks the public
inbound access. This technology is very similar to an internal App
Service Environment (ASE) but much cheaper.
I have an azure website that I can access by
myname.azurewebsites.net
In Azure dashboard, the IP is 104.214.237.135
When I try to access my website by IP I have a 404 error
I don't understand. My plan App Service is S1
Regards
Azure App Service is a multi-tenant service, except for App Service Environments. Apps that are not in an App Service environment (not in the Isolated tier) share network infrastructure with other apps. As a result, the inbound and outbound IP addresses of an app can be different, and can even change in certain situations.
App Service Environments use dedicated network infrastructures, so apps running in an App Service environment get static, dedicated IP addresses both for inbound and outbound connections.
Azure AppService IP addresses are shared between tenants and not guaranteed to be static. Your app is bound to the hostname, not the IP address. Unless you are using App Service Environment, you cannot use a static / dedicated IP address with Azure AppServices. You can add additional custom hostnames to your app.
I've got a app plan (BASIC SMALL) with a private (hopefully) ip adress that can be found under Settings > Custom Domains.
When I try to access the content of the app using just the ip, it doesn't work. The site says "Error 404 - Web app not found." The hostname works just fine. When I ping the hostname it gives me the same ip adress. What do I have to do in order to be able to access it just using the ip?
That's not how Web Apps work, since you don't get a unique IP address assigned. You'll need to access it via yourname.azurewebsites.net or yourcustomdomainname.com - and then your requests are routed appropriately based on the name you provide.
If you absolutely needed a dedicated IP address, you'd need to deploy to a virtual machine.
When you host your web site on Azure web app it is bound to a virtual IP address that is shared with other web sites in the same app service plan. If you want to get a dedicated IP with your web site, please try to use Azure virtual machine with reserved IP. You could also choose App Service Environment
If you buy your custom domain, you can freely set DNS A records for that IP (it remains static). It sets binding of your domain to your web app. You can't access it directly by IP. Because on a given IP address and standard HTTP port 80, only one web can be running.
Imagine your web app could be open by entering that IP. You would "block" port 80 for zillions of other stuff running there.
If you check Properties blade there you will see a number of outbound IP addresses. If you consume some requests from web app / job / ... and have IP restriction set on the other side - you need to allow all these IPs.
As David suggested. If you really need a static IP - you need to run VM and set IP address as static or set VNet for web app.