Execute a process with the same environment variable than another process [duplicate] - linux

This question already has an answer here:
Why variable values are lost after terminating the loop in bash? [duplicate]
(1 answer)
Closed 2 years ago.
I would like to make a script which allow me to execute a command which inherit environment variables from any PID.
Here the script I made :
#!/bin/sh
VARS=$(cat -A /proc/1/environ | tr "^#" "\n")
COMMAND=""
# sh compatible loop on a variable containing multiple lines
printf %s "$VARS" | while IFS='\n' read -r var
do
if [ "$var" != "" ]; then
export "$var"
fi
done
exec "$#"
I though exported variables would be available for the child process (created by exec) but this is obviously not the case because sh my_script.sh printenv doesn't show environment variables which are in /proc/1/environ.
I also tried the following script :
#!/bin/sh
VARS=$(cat -A /proc/1/environ | tr "^#" "\n")
COMMAND=""
# sh compatible loop on a variable containing multiple lines
printf %s "$VARS" | while IFS='\n' read -r var
do
if [ "$var" != "" ]; then
# Replace 'VAR=var' by 'VAR="var"' for eval
# sed replace only the first occurence of the '=' due of the missing /g parameter
escaped=$(echo $var | sed -e 's/=/="/')\"
COMMAND="${COMMAND} ${escaped}"
fi
done
COMMAND="${COMMAND} $#"
eval $COMMAND
However, it looks like eval doesn't export variables even if the evaluated command looks like VAR=value my_command.
How I am supposed to achieve my needs ?
Thanks in advance

That one should work (tested on RHEL 7)
#!/bin/bash
locPROC=$1
locCMD=$2
if [[ -z $locPROC || -z $locCMD ]]; then
exit
fi
if [[ -r /proc/${locPROC}/environ ]]; then
while IFS= read -r -d '' line; do
#Making sure it's properly quoted
locVar="${line/=/=\"}\""
#You probably don't want to mess with those
if [[ ${locVar:0:1} != "_" && ${locVar} != A__z* ]]; then
eval "$locVar"
eval "export ${locVar%%=*}"
fi
done < "/proc/${locPROC}/environ"
$locCMD
else
echo "Environment file is either inexistant or unreadable"
fi
EDITED : According to comments (still use eval...got to read more :) )

Related

BASH Shell named command line arguments [duplicate]

This question already has answers here:
An example of how to use getopts in bash
(8 answers)
Closed 7 months ago.
Can some please help how to pass named command line arguments to my shell script. Something like below.
./myOwnShellScript.sh -name Thor -tool Hammer
Below is one way to implement
#!/bin/bash
#################################################################################################
# Script name - myOwnShellScript.sh
# Description - This script is used to implement my own logic.
# Author - Tony
#################################################################################################
function usage(){
echo "Here is usage..."
echo "./myOwnShellScript.sh -name <<Name of your hero>> -tool <<your hero's tool>>"
}
function paramMap(){
declare -A params=( ["name"]="name" ["tool"]="tool" )
paramVarName="${params[${1}]}"
[ -z "${paramVarName}" ] && echo "info" || echo "${paramVarName}"
}
####################################################################################
#----------------------------------------------------------------------------------#
# Main starts, the script execution starts here. #
#----------------------------------------------------------------------------------#
####################################################################################
export TERM="xterm"
clear
trap "exit 1" TERM
export TOP_PID=$$
CURR_TIME=$(date +"%Y-%m-%d-%T")
echo -e "\n**********************************************"
echo -e "\n myOwnShellScript.sh Script Started ${CURR_TIME}"
echo -e "\n**********************************************"
##################################################################################################
# Variable Declaration
##################################################################################################
#Read command line parameters and set script variables.
while [ $# -gt 0 ]; do
if [[ $1 == *"-"* ]]; then
v="${1/-/}"
p=$(paramMap ${v})
paramValue=$([ -z "$2" ] && echo "1" || echo "$2")
declare $p="${paramValue}"
fi
shift
done
echo "Here is your hero ${name}"
echo "His tool is ${tool}"

What is the cleanest/easiest way to read in a config file

I want to create a config file with key=value pairs in groupings so that I can iterate through the config file in groups of key=value pairs.
Example config file:
#group1
var1=test1
var2=test2
var3=test3
#group2
var1=text4
var2=text5
var3=test6
var4=test7
#group3
var3=test8
Is there a simple way to parse a config file similar to this layout where each group may include/exclude parameters, and each iteration of the parsing loop will pull in that specific groups key=value pairs?
Does bash have a built in config parser? This is for an openrc init script.
Building on the answers in this thread, you could do something like this:
#! /bin/bash
if [ -f "${HOME}/.${0##*/}" ]; then
config="${HOME}/.${0##*/}rc"
else
config="/etc/${0##*/}"
fi
if [ -f "$config" ]; then
section=global
while read -r line; do
if [[ $line =~ ^(#|$) ]]; then continue; fi
if [[ $line =~ ^\[[[:alpha:]_][[:alnum:]_]*\]$ ]]; then
section=${line#[}
section=${section%]}
elif [[ $line =~ ^[[:alpha:]_][[:alnum:]_]*= ]]; then
eval "${section}_${line%%=*}"=\${line#*=}
fi
done <"$config"
fi
This assumes bash, and parses config files like this:
# comment
global1=gval1
global2=gval2
[section1]
variable_1=value_11
variable_2=value_12
[section2]
variable_1=value_21
variable_2=value_22
It sets the variables named in the config file, with the name prefixed by the name of the section. Comments and blank lines are ignored.
Proof of concept:
set | egrep '^(global|section)[^=]' | \
while read -r line; do
key=${line%%=*}
eval "val=\${$key}"
printf '%s = [%s]\n' "$key" "$val"
done
Output:
global_global1 = [gval1]
global_global2 = [gval2]
section1_variable_1 = [value_11]
section1_variable_2 = [value_12]
section2_variable_1 = [value_21]
section2_variable_2 = [value_22]
You can use the command cut using the equals sign = as a delimiter
If $line is every valid line, (you can escape lines starting with comments and empty lines)
key=`cut -f1 -d '=" $line`
value=`cut -f2 -d '=" $line`

Checking root integrity via a script

Below is my script to check root path integrity, to ensure there is no vulnerability in PATH variable.
#! /bin/bash
if [ ""`echo $PATH | /bin/grep :: `"" != """" ]; then
echo "Empty Directory in PATH (::)"
fi
if [ ""`echo $PATH | /bin/grep :$`"" != """" ]; then echo ""Trailing : in PATH""
fi
p=`echo $PATH | /bin/sed -e 's/::/:/' -e 's/:$//' -e 's/:/ /g'`
set -- $p
while [ ""$1"" != """" ]; do
if [ ""$1"" = ""."" ]; then
echo ""PATH contains ."" shift
continue
fi
if [ -d $1 ]; then
dirperm=`/bin/ls -ldH $1 | /bin/cut -f1 -d"" ""`
if [ `echo $dirperm | /bin/cut -c6 ` != ""-"" ]; then
echo ""Group Write permission set on directory $1""
fi
if [ `echo $dirperm | /bin/cut -c9 ` != ""-"" ]; then
echo ""Other Write permission set on directory $1""
fi
dirown=`ls -ldH $1 | awk '{print $3}'`
if [ ""$dirown"" != ""root"" ] ; then
echo $1 is not owned by root
fi
else
echo $1 is not a directory
fi
shift
done
The script works fine for me, and shows all vulnerable paths defined in the PATH variable. I want to also automate the process of correctly setting the PATH variable based on the above result. Any quick method to do that.
For example, on my Linux box, the script gives output as:
/usr/bin/X11 is not a directory
/root/bin is not a directory
whereas my PATH variable have these defined,and so I want to have a delete mechanism, to remove them from PATH variable of root. lot of lengthy ideas coming in mind. But searching for a quick and "not so complex" method please.
No offense but your code is completely broken. Your using quotes in a… creative way, yet in a completely wrong way. Your code is unfortunately subject to pathname expansions and word splitting. And it's really a shame to have an insecure code to “secure” your PATH.
One strategy is to (safely!) split your PATH variable into an array, and scan each entry. Splitting is done like so:
IFS=: read -r -d '' -a path_ary < <(printf '%s:\0' "$PATH")
See my mock which and How to split a string on a delimiter answers.
With this command you'll have a nice array path_ary that contains each fields of PATH.
You can then check whether there's an empty field, or a . field or a relative path in there:
for ((i=0;i<${#path_ary[#]};++i)); do
if [[ ${path_ary[i]} = ?(.) ]]; then
printf 'Warning: the entry %d contains the current dir\n' "$i"
elif [[ ${path_ary[i]} != /* ]]; then
printf 'Warning: the entry %s is not an absolute path\n' "$i"
fi
done
You can add more elif's, e.g., to check whether the entry is not a valid directory:
elif [[ ! -d ${path_ary[i]} ]]; then
printf 'Warning: the entry %s is not a directory\n' "$i"
Now, to check for the permission and ownership, unfortunately, there are no pure Bash ways nor portable ways of proceeding. But parsing ls is very likely not a good idea. stat can work, but is known to have different behaviors on different platforms. So you'll have to experiment with what works for you. Here's an example that works with GNU stat on Linux:
read perms owner_id < <(/usr/bin/stat -Lc '%a %u' -- "${path_ary[i]}")
You'll want to check that owner_id is 0 (note that it's okay to have a dir path that is not owned by root; for example, I have /home/gniourf/bin and that's fine!). perms is in octal and you can easily check for g+w or o+w with bit tests:
elif [[ $owner_id != 0 ]]; then
printf 'Warning: the entry %s is not owned by root\n' "$i"
elif ((0022&8#$perms)); then
printf 'Warning: the entry %s has group or other write permission\n' "$i"
Note the use of 8#$perms to force Bash to understand perms as an octal number.
Now, to remove them, you can unset path_ary[i] when one of these tests is triggered, and then put all the remaining back in PATH:
else
# In the else statement, the corresponding entry is good
unset_it=false
fi
if $unset_it; then
printf 'Unsetting entry %s: %s\n' "$i" "${path_ary[i]}"
unset path_ary[i]
fi
of course, you'll have unset_it=true as the first instruction of the loop.
And to put everything back into PATH:
IFS=: eval 'PATH="${path_ary[*]}"'
I know that some will cry out loud that eval is evil, but this is a canonical (and safe!) way to join array elements in Bash (observe the single quotes).
Finally, the corresponding function could look like:
clean_path() {
local path_ary perms owner_id unset_it
IFS=: read -r -d '' -a path_ary < <(printf '%s:\0' "$PATH")
for ((i=0;i<${#path_ary[#]};++i)); do
unset_it=true
read perms owner_id < <(/usr/bin/stat -Lc '%a %u' -- "${path_ary[i]}" 2>/dev/null)
if [[ ${path_ary[i]} = ?(.) ]]; then
printf 'Warning: the entry %d contains the current dir\n' "$i"
elif [[ ${path_ary[i]} != /* ]]; then
printf 'Warning: the entry %s is not an absolute path\n' "$i"
elif [[ ! -d ${path_ary[i]} ]]; then
printf 'Warning: the entry %s is not a directory\n' "$i"
elif [[ $owner_id != 0 ]]; then
printf 'Warning: the entry %s is not owned by root\n' "$i"
elif ((0022 & 8#$perms)); then
printf 'Warning: the entry %s has group or other write permission\n' "$i"
else
# In the else statement, the corresponding entry is good
unset_it=false
fi
if $unset_it; then
printf 'Unsetting entry %s: %s\n' "$i" "${path_ary[i]}"
unset path_ary[i]
fi
done
IFS=: eval 'PATH="${path_ary[*]}"'
}
This design, with if/elif/.../else/fi is good for this simple task but can get awkward to use for more involved tests. For example, observe that we had to call stat early before the tests so that the information is available later in the tests, before we even checked that we're dealing with a directory.
The design may be changed by using a kind of spaghetti awfulness as follows:
for ((oneblock=1;oneblock--;)); do
# This block is only executed once
# You can exit this block with break at any moment
done
It's usually much better to use a function instead of this, and return from the function. But because in the following I'm also going to check for multiple entries, I'll need to have a lookup table (associative array), and it's weird to have an independent function that uses an associative array that's defined somewhere else…
clean_path() {
local path_ary perms owner_id unset_it oneblock
local -A lookup
IFS=: read -r -d '' -a path_ary < <(printf '%s:\0' "$PATH")
for ((i=0;i<${#path_ary[#]};++i)); do
unset_it=true
for ((oneblock=1;oneblock--;)); do
if [[ ${path_ary[i]} = ?(.) ]]; then
printf 'Warning: the entry %d contains the current dir\n' "$i"
break
elif [[ ${path_ary[i]} != /* ]]; then
printf 'Warning: the entry %s is not an absolute path\n' "$i"
break
elif [[ ! -d ${path_ary[i]} ]]; then
printf 'Warning: the entry %s is not a directory\n' "$i"
break
elif [[ ${lookup[${path_ary[i]}]} ]]; then
printf 'Warning: the entry %s appears multiple times\n' "$i"
break
fi
# Here I'm sure I'm dealing with a directory
read perms owner_id < <(/usr/bin/stat -Lc '%a %u' -- "${path_ary[i]}")
if [[ $owner_id != 0 ]]; then
printf 'Warning: the entry %s is not owned by root\n' "$i"
break
elif ((0022 & 8#$perms)); then
printf 'Warning: the entry %s has group or other write permission\n' "$i"
break
fi
# All tests passed, will keep it
lookup[${path_ary[i]}]=1
unset_it=false
done
if $unset_it; then
printf 'Unsetting entry %s: %s\n' "$i" "${path_ary[i]}"
unset path_ary[i]
fi
done
IFS=: eval 'PATH="${path_ary[*]}"'
}
All this is really safe regarding spaces and glob characters and newlines inside PATH; the only thing I don't really like is the use of the external (and non-portable) stat command.
I'd recommend you get a good book on Bash shell scripting. It looks like you learned Bash from looking at 30 year old system shell scripts and by hacking away. This isn't a terrible thing. In fact, it shows initiative and great logic skills. Unfortunately, it leads you down to some really bad code.
If statements
In the original Bourne shell the [ was a command. In fact, /bin/[ was a hard link to /bin/test. The test command was a way to test certain aspects of a file. For example test -e $file would return a 0 if the $file was executable and a 1 if it wasn't.
The if merely took the command after it, and would run the then clause if that command returned an exit code of zero, or the else clause (if it exists) if the exit code wasn't zero.
These two are the same:
if test -e $file
then
echo "$file is executable"
fi
if [ -e $file ]
then
echo "$file is executable"
fi
The important idea is that [ is merely a system command. You don't need these with the if:
if grep -q "foo" $file
then
echo "Found 'foo' in $file"
fi
Note that I am simply running grep and if grep is successful, I'm echoing my statement. No [ ... ] are necessary.
A shortcut to the if is to use the list operators && and ||. For example:
grep -q "foo" $file && echo "I found 'foo' in $file"
is the same as the above if statement.
Never parse ls
You should never parse the ls command. You should use stat instead. stat gets you all the information in the command, but in an easily parseable form.
[ ... ] vs. [[ ... ]]
As I mentioned earlier, in the original Bourne shell, [ was a system command. In Kornshell, it was an internal command, and Bash carried it over too.
The problem with [ ... ] is that the shell would first interpolate the command before the test was performed. Thus, it was vulnerable to all sorts of shell issues. The Kornshell introduced [[ ... ]] as an alternative to the [ ... ] and Bash uses it too.
The [[ ... ]] allows Kornshell and Bash to evaluate the arguments before the shell interpolates the command. For example:
foo="this is a test"
bar="test this is"
[ $foo = $bar ] && echo "'$foo' and '$bar' are equal."
[[ $foo = $bar ]] && echo "'$foo' and '$bar' are equal."
In the [ ... ] test, the shell interpolates first which means that it becomes [ this is a test = test this is ] and that's not valid. In [[ ... ]] the arguments are evaluated first, thus the shell understands it's a test between $foo and $bar. Then, the values of $foo and $bar are interpolated. That works.
For loops and $IFS
There's a shell variable called $IFS that sets how read and for loops parse their arguments. Normally, it's set to space/tab/NL, but you can modify this. Since each PATH argument is separated by :, you can set IFS=:", and use a for loop to parse your $PATH.
The <<< Redirection
The <<< allows you to take a shell variable and pass it as STDIN to the command. These both more or less do the same thing:
statement="This contains the word 'foo'"
echo "$statement" | sed 's/foo/bar/'
statement="This contains the word 'foo'"
sed 's/foo/bar/'<<<$statement
Mathematics in the Shell
Using ((...)) allows you to use math and one of the math function is masking. I use masks to determine whether certain bits are set in the permission.
For example, if my directory permission is 0755 and I and it against 0022, I can see if user read and write permissions are set. Note the leading zeros. That's important, so that these are interpreted as octal values.
Here's your program rewritten using the above:
#! /bin/bash
grep -q "::" <<<"$PATH" && echo "Empty directory in PATH ('::')."
grep -q ":$" <<<$PATH && "PATH has trailing ':'"
#
# Fix Path Issues
#
path=$(sed -e 's/::/:/g' -e 's/:$//'<<<$PATH);
OLDIFS="$IFS"
IFS=":"
for directory in $PATH
do
[[ $directory == "." ]] && echo "Path contains '.'."
[[ ! -d "$directory" ]] && echo "'$directory' isn't a directory in path."
mode=$(stat -L -f %04Lp "$directory") # Differs from system to system
[[ $(stat -L -f %u "$directory") -eq 0 ]] && echo "Directory '$directory' owned by root"
((mode & 0022)) && echo "Group or Other write permission is set on '$directory'."
done
I'm not 100% sure what you want to do or mean about PATH Vulnerabilities. I don't know why you care whether a directory is owned by root, and if an entry in the $PATH is not a directory, it won't affect the $PATH. However, one thing I would test for is to make sure all directories in your $PATH are absolute paths.
[[ $directory != /* ]] && echo "Directory '$directory' is a relative path"
The following could do the whole work and also removes duplicate entries
export PATH="$(perl -e 'print join(q{:}, grep{ -d && !((stat(_))[2]&022) && !$seen{$_}++ } split/:/, $ENV{PATH})')"
I like #kobame's answer but if you don't like the perl-dependency you can do something similar to:
$ cat path.sh
#!/bin/bash
PATH="/root/bin:/tmp/groupwrite:/tmp/otherwrite:/usr/bin:/usr/sbin"
echo "${PATH}"
OIFS=$IFS
IFS=:
for path in ${PATH}; do
[ -d "${path}" ] || continue
paths=( "${paths[#]}" "${path}" )
done
while read -r stat path; do
[ "${stat:5:1}${stat:8:1}" = '--' ] || continue
newpath="${newpath}:${path}"
done < <(stat -c "%A:%n" "${paths[#]}" 2>/dev/null)
IFS=${OIFS}
PATH=${newpath#:}
echo "${PATH}"
$ ./path.sh
/root/bin:/tmp/groupwrite:/tmp/otherwrite:/usr/bin:/usr/sbin
/usr/bin:/usr/sbin
Note that this is not portable due to stat not being portable but it will work on Linux (and Cygwin). For this to work on BSD systems you will have to adapt the format string, other Unices don't ship with stat at all OOTB (Solaris, for example).
It doesn't remove duplicates or directories not owned by root either but that can easily be added. The latter only requires the loop to be adapted slightly so that stat also returns the owner's username:
while read -r stat owner path; do
[ "${owner}${stat:5:1}${stat:8:1}" = 'root--' ] || continue
newpath="${newpath}:${path}"
done < <(stat -c "%A:%U:%n" "${paths[#]}" 2>/dev/null)

No such file or directory error while execute commands from script

I'm working on a script that takes commands from MySQL and executes them one by one. My problem is I can't execute the commands from script:
./bash.sh: line 26: /myscript.sh -c "": no such file or directory
Line 26 is the command I wish to execute ("$com"). if i try to run the command manually, by echoing the content of "$com" and than run it from terminal, it's working.
What am I doing wrong?
if [ ! "${#array[*]}" -eq "0" ]; then
for (( i=0 ; i<cnt ; i++ )); do
id=$(echo "${array[$i]}" | sed 's#\t#^#g' | cut -f'1' -d'^')
com=$(echo "${array[$i]}" | sed 's#\t#^#g' | cut -f'2' -d'^')
imp=$(echo "${array[$i]}" | sed 's#\t#^#g' | cut -f'3' -d'^')
if [[ "$id" = [0-9]* ]]; then
"$com"
echo "DELETE FROM list WHERE id='$id'" | mysql "$DB_USER" -u "$DB_USER" -p"$DB_PASS"
fi
done
else
echo "The list is empty"
fi
Added as Community Wiki
This question was solved in the comments by Vaughn Cato and the OP hasn't been seen since March.
The accept answer there was to use eval so the if statement in the script would be:
if [[ "$id" = [0-9]* ]]; then
eval "$com"
echo "DELETE FROM list WHERE id='$id'" | mysql "$DB_USER" -u "$DB_USER" -p"$DB_PASS"
fi
Change
"$com"
rather to
$com
(remember: too many quotes can be as harmful as too few)
than to
eval "$com"
it is unnecessarily complicated to use eval just to undo the unwanted effect of quoting.

Create new file but add number if filename already exists in bash

I found similar questions but not in Linux/Bash
I want my script to create a file with a given name (via user input) but add number at the end if filename already exists.
Example:
$ create somefile
Created "somefile.ext"
$ create somefile
Created "somefile-2.ext"
The following script can help you. You should not be running several copies of the script at the same time to avoid race condition.
name=somefile
if [[ -e $name.ext || -L $name.ext ]] ; then
i=0
while [[ -e $name-$i.ext || -L $name-$i.ext ]] ; do
let i++
done
name=$name-$i
fi
touch -- "$name".ext
Easier:
touch file`ls file* | wc -l`.ext
You'll get:
$ ls file*
file0.ext file1.ext file2.ext file3.ext file4.ext file5.ext file6.ext
To avoid the race conditions:
name=some-file
n=
set -o noclobber
until
file=$name${n:+-$n}.ext
{ command exec 3> "$file"; } 2> /dev/null
do
((n++))
done
printf 'File is "%s"\n' "$file"
echo some text in it >&3
And in addition, you have the file open for writing on fd 3.
With bash-4.4+, you can make it a function like:
create() { # fd base [suffix [max]]]
local fd="$1" base="$2" suffix="${3-}" max="${4-}"
local n= file
local - # ash-style local scoping of options in 4.4+
set -o noclobber
REPLY=
until
file=$base${n:+-$n}$suffix
eval 'command exec '"$fd"'> "$file"' 2> /dev/null
do
((n++))
((max > 0 && n > max)) && return 1
done
REPLY=$file
}
To be used for instance as:
create 3 somefile .ext || exit
printf 'File: "%s"\n' "$REPLY"
echo something >&3
exec 3>&- # close the file
The max value can be used to guard against infinite loops when the files can't be created for other reason than noclobber.
Note that noclobber only applies to the > operator, not >> nor <>.
Remaining race condition
Actually, noclobber does not remove the race condition in all cases. It only prevents clobbering regular files (not other types of files, so that cmd > /dev/null for instance doesn't fail) and has a race condition itself in most shells.
The shell first does a stat(2) on the file to check if it's a regular file or not (fifo, directory, device...). Only if the file doesn't exist (yet) or is a regular file does 3> "$file" use the O_EXCL flag to guarantee not clobbering the file.
So if there's a fifo or device file by that name, it will be used (provided it can be open in write-only), and a regular file may be clobbered if it gets created as a replacement for a fifo/device/directory... in between that stat(2) and open(2) without O_EXCL!
Changing the
{ command exec 3> "$file"; } 2> /dev/null
to
[ ! -e "$file" ] && { command exec 3> "$file"; } 2> /dev/null
Would avoid using an already existing non-regular file, but not address the race condition.
Now, that's only really a concern in the face of a malicious adversary that would want to make you overwrite an arbitrary file on the file system. It does remove the race condition in the normal case of two instances of the same script running at the same time. So, in that, it's better than approaches that only check for file existence beforehand with [ -e "$file" ].
For a working version without race condition at all, you could use the zsh shell instead of bash which has a raw interface to open() as the sysopen builtin in the zsh/system module:
zmodload zsh/system
name=some-file
n=
until
file=$name${n:+-$n}.ext
sysopen -w -o excl -u 3 -- "$file" 2> /dev/null
do
((n++))
done
printf 'File is "%s"\n' "$file"
echo some text in it >&3
Try something like this
name=somefile
path=$(dirname "$name")
filename=$(basename "$name")
extension="${filename##*.}"
filename="${filename%.*}"
if [[ -e $path/$filename.$extension ]] ; then
i=2
while [[ -e $path/$filename-$i.$extension ]] ; do
let i++
done
filename=$filename-$i
fi
target=$path/$filename.$extension
Use touch or whatever you want instead of echo:
echo file$((`ls file* | sed -n 's/file\([0-9]*\)/\1/p' | sort -rh | head -n 1`+1))
Parts of expression explained:
list files by pattern: ls file*
take only number part in each line: sed -n 's/file\([0-9]*\)/\1/p'
apply reverse human sort: sort -rh
take only first line (i.e. max value): head -n 1
combine all in pipe and increment (full expression above)
Try something like this (untested, but you get the idea):
filename=$1
# If file doesn't exist, create it
if [[ ! -f $filename ]]; then
touch $filename
echo "Created \"$filename\""
exit 0
fi
# If file already exists, find a similar filename that is not yet taken
digit=1
while true; do
temp_name=$filename-$digit
if [[ ! -f $temp_name ]]; then
touch $temp_name
echo "Created \"$temp_name\""
exit 0
fi
digit=$(($digit + 1))
done
Depending on what you're doing, replace the calls to touch with whatever code is needed to create the files that you are working with.
This is a much better method I've used for creating directories incrementally.
It could be adjusted for filename too.
LAST_SOLUTION=$(echo $(ls -d SOLUTION_[[:digit:]][[:digit:]][[:digit:]][[:digit:]] 2> /dev/null) | awk '{ print $(NF) }')
if [ -n "$LAST_SOLUTION" ] ; then
mkdir SOLUTION_$(printf "%04d\n" $(expr ${LAST_SOLUTION: -4} + 1))
else
mkdir SOLUTION_0001
fi
A simple repackaging of choroba's answer as a generalized function:
autoincr() {
f="$1"
ext=""
# Extract the file extension (if any), with preceeding '.'
[[ "$f" == *.* ]] && ext=".${f##*.}"
if [[ -e "$f" ]] ; then
i=1
f="${f%.*}";
while [[ -e "${f}_${i}${ext}" ]]; do
let i++
done
f="${f}_${i}${ext}"
fi
echo "$f"
}
touch "$(autoincr "somefile.ext")"
without looping and not use regex or shell expr.
last=$(ls $1* | tail -n1)
last_wo_ext=$($last | basename $last .ext)
n=$(echo $last_wo_ext | rev | cut -d - -f 1 | rev)
if [ x$n = x ]; then
n=2
else
n=$((n + 1))
fi
echo $1-$n.ext
more simple without extension and exception of "-1".
n=$(ls $1* | tail -n1 | rev | cut -d - -f 1 | rev)
n=$((n + 1))
echo $1-$n.ext

Resources