Basically i have a yml file and i want to convert the keys to lowercase.
example below.
KEY: value
ANOTHER_KEY: another_value
I tried the vwu and it works as expected but i want to apply in the whole file.
I also used the . (dot) to apply the above command using number & j multiple times.
Another possible approach:
:%norm! guiw
% ................. the whole file
norm! .............. in normal mode please
gu ................. make {motion} text lowercase
iw ................. inner word
It also could be:
:%norm! gut:
t: .............. until :
Okay, one approach is to use the sub-replace-expression functionality. The following command:
:%s/\(\s*\)\(\w*\)\(.*\)/\= submatch(1) . tolower(submatch(2)) . submatch(3)/
Will, for each line, match whitespace word whatever, and replace it with the same thing but word being lowercase. I'm assuming that you are familiar with the restrictions and usage of regular expressions so I won't go into all the details of why I did the expression that way, how to modify it, or restrictions with using them against a context-free language (I think?) like yaml here, but the \= token in the :s command can be pretty nifty.
Related
I'm trying to convert multiple instances of Unicode codes to their corresponding characters.
I have some text with this format:
U+00A9
And I want to generate the following next to it:
©
I have tried to select the code in visual mode and use the selection range '<,'> in command mode as input for i_CTRL_V but I don't know how to use special keys on a command.
I haven't found anything useful in the manual with :help command-mode . I could solve this problem using other tools but I want to improve my vim knowledge. Any hint is appreciated.
Edit:
As #m_mlvx has pointed out my goal is to visually select, then run some command that looks up the Unicode and does the substitution. Manually input a substitution like :s/U+00A9/U+00A9 ©/g is not what I'm interested in as it would require manually typing each of the special characters on every substitution.
Any hint is appreciated.
Here are a whole lot of them…
:help i_ctrl-v is about insert mode and ranges matter in command-line mode so :help command-mode is totally irrelevant.
When they work on text, Ex commands only work on lines, not arbitrary text. This makes ranges like '<,'> irrelevant in this case.
After carefully reading :help i_ctrl-v_digit, linked from :help i_ctrl-v, we can conclude that it is supposed to be used:
with a lowercase u,
without the +,
without worrying about the case of the value.
So both of these should be correct:
<C-v>u00a9
<C-v>u00A9
But your input is U+00A9 so, even if you somehow manage to "capture" that U+00A9, you won't be able to use it as-is: it must be sanitized first. I would go with a substitution but, depending on how you want to use that value in the end, there are probably dozens of methods:
substitute('U+00A9', '\(\a\)+\(.*\)', '\L\1\2', '')
Explanation:
\(\a\) captures an alphabetic character.
+ matches a literal +.
\(.*\) captures the rest.
\L lowercases everything that comes after it.
\1\2 reuses the two capture groups above.
From there, we can imagine a substitution-based method. Assuming "And I want to generate the following next to it" means that you want to obtain:
U+00A9©
you could do:
v<motion>
y
:call feedkeys("'>a\<C-v>" . substitute(#", '\(\a\)+\(.*\)', '\L\1\2', '') . "\<Esc>")<CR>
Explanation:
v<motion> visually selects the text covered by <motion>.
y yanks it to the "unnamed register" #".
:help feedkeys() is used as low-level way to send a complex series of characters to Vim's input queue. It allows us to build the macro programatically before executing it.
'> moves the cursor to the end of the visual selection.
a starts insert mode after the cursor.
<C-v> + the output of the substitution inserts the appropriate character.
That snippet begs for being turned into a mapping, though.
In case you would like to just convert unicodes to corresponding characters, you could use such nr2char function:
:%s/U+\(\x\{4\}\)/\=nr2char('0x'.submatch(1))/g
Brief explanation
U+\(\x\{4\}\) - search for a specific pattern (U+ and four hexadecimal characters which are stored in group 1)
\= - substitute with result of expression
'0x'.submatch(1) - append 0x to our group (U+00A9 -> 0x00A9)
In case you would like to have unicode character next to text you need to modify slightly right side (use submatch(0) to get full match and . to append)
In case someone wonders how to compose the substitution command:
'<,'>s/\<[uU]+\(\x\+\)\>/\=submatch(0)..' '..nr2char(str2nr(submatch(1), 16), 1)/g
The regex is:
word start
Letter "U" or "u"
Literal "plus"
One or more hex digits (put into "capture group")
word end
Then substituted by (:h sub-replace-expression) concatenation of:
the whole matched string
single space
character by UTF-8 hex code taken from "capture group"
This is to be executed in Visual/command mode and works over selected line range.
I come upon one scenario when editing a file in vim and I still haven't found a way to do it quickly in vim way. When editing a call of a function, I offently put my arguments in a wrong order.
anyFunction(arg2, arg1)
When arriving on this situation, I have to find arg2 / delete it / append it before the ')' / deal with the ', ' / etc.
Isn't it a better way to this task quickly ? I am open to any idea (macro/ shortcut / plugin) even if I'd rather have a 'vim only' way of doing this
You need two things:
A text object to quickly select an argument (as they aren't always that simple like in your example). argtextobj plugin (my improved fork here) does this.
Though you can use delete + visual mode + paste + go back + paste, a plugin to swap text makes this much easier. My SwapText plugin or the already mentioned exchange plugin both do that job.
put this mapping in your _vimrc.
" gw : Swap word with next word
nmap <silent> gw :s/\(\%#\w\+\)\(\_W\+\)\(\w\+\)/\3\2\1/<cr><c-o><c-l>
then in normal mode with the cursor anywhere in arg1 type gw to swap parameters
anyFunction(arg1, arg2)
Explanation:-
arg1 the separator (here a comma) and arg2 are put into regexp memories 1 2 3
the substitute reverses them to 3 2 1
Control-O return to last position
Control-L redraw the screen
Note that the separator is any non-alphanumeric character or string e,g whitespace
I actually made a plugin to deal with a exact situation called argumentative.vim. (Sorry for the plug.)
Argumentative.vim provides the following mappings:
[, and ], motions which will go to the previous or next argument
<, and >, to shift an argument left or right
i, and a, argument text objects. e.g. da,, ci, or yi,
So with this plugin you move to the argument in question and then do a <, or >, as many times as needed. It can also take a count e.g. 2>,.
If you have Tim Pope's excellent repeat.vim plugin installed <, and >, become repeatable with the . command.
I would recommend a plugin: vim-exchange for that:
https://github.com/tommcdo/vim-exchange
This is a perfect use for a regular expression search and replace.
You want to find "anyFunction(", then swap anything up to the ',' with anything from the ',' to the ')'. This is fairly straightforward, using [^,]* for "anything up to the ','" and [^)]* for "anything up to the ')'". Use \(...\) to capture each thing, and \1, \2 to refer to those things in the replacement:
:s#anyFunction(\s*\([^,]*\),\s*\([^)]*\)#anyFunction(\2, \1#g
Note how I use \s* to allow any whitespace between the "anyFunction(" and the first thing, and also between the ',' and the second thing.
If you want this to be able to span multiple lines, you can use \_s instead of \s, and capture the whitespace if you want to maintain the multi-line format:
:s#anyFunction(\(\_s*\)\([^,]*\),\(\_s*\)\([^)]*\)#anyFunction(\1\4,\3\2#g
There is also a multi-line variant of [...] collections, for example \_[^,] meaning "anything (even a new line) except for a ',' " which you could use in the pattern if your use case demands it.
For details, consult the help topics for: /\s, /\_s, /\1, /\(, and /[.
If you want a more general-purpose mapping to use at every location, you can use the cursor position in your regular expression, rather than keying off the function name. The cursor position in a regular expression is matched using \%# as demonstrated here: http://vim.wikia.com/wiki/Exchanging_adjacent_words
Similar to what Peter Rincker suggested (Argumentative), sideways also does what you describe.
When i need to replace a string with a new string in vim.
First i would use search-mode to check that the search pattern is correct.
/search pattern
Then use the 's' command to do substitution.
:%s/search pattern/new string/
The search pattern need to type twice. If it is too complex, it would be boring.
Is there a method to avoid this?
You can simply omit the pattern in the substitution command, e.g.
:%s//new string/
This is documented in :help last-pattern (emphasis mine):
The last used pattern and offset are remembered. They can be used to
repeat the search, possibly in another direction or with another
count. Note that two patterns are remembered: One for 'normal' search
commands and one for the substitute command ":s". Each time an empty
pattern is given, the previously used pattern is used.
Also (in addition to Marco Baldelli's correct answer), the last search pattern is stored in the special register /. You can insert this in the command-line via Ctrl + R, followed by /. (This also works in insert mode, and also with other registers.) It's helpful when you want to tweak your search pattern before substituting.
I always wanted to know, how you can substitute within given parameters.
If you have a line like this:
123,Hello,World,(I am, here), unknown
and you wnat to replace World with Foobar then this is an easy task: :%s/World/Foobar/
Now I wonder how I can get rid of a , which is wihtin the ( ).
Theoretically I just have to find the first occurance of ( then substitute the , with a blank until ).
Try lookahead and lookbehind assertions:
%s/([^)]*\zs,\ze.*)//
(\zs and \ze tell where pattern starts and end)
or
%s/\(([^)]*\)\#<=,\(.*)\)\#=//
The first one is more readable, the second one uses \( ... \) groupings with parentheses inside groups which makes it look like obfuscated, and \#<= which apart from being a nice ASCII-art duck is the lookbehind operator, and \#= that is the lookahead operator.
References: :help pattern (more detail at :help /\#=, :help /\ze, etc.)
You use the GUI and want to try those commands? Copy them into the clipboard and run :#+ inside Gvim.
Modifying slightly the answer of #Tom can give you a quite good and "a bit" more readable result :
%s/\(.*\)(\(.*\),\(.*\))\(.*\)/\1(\2\3)\4/
That way you will have : in \1 will store what is at the left outside of the parenthesis, \4 what is at the right outside of the parenthesis and \2 and \3 what is inside the parenthesis, respectively on the left (\2) and on the right (\3).
With that you can easily swap your elements if your file is organised as column.
You can also select the text you want to change (either with visual or visual-block modes) and enter the : to start the replace command. vi will automatically start the command with :'<,'> which applies the command to the selected area.
Replacing a , can be done with:
:'<,'>s/,/ /g
For your example, this is the same thing as suggested by #ubuntuguy
%s/\(.*\)(\(.*\),\(.*\)/\1(\2\3
This will do the exact replacement you want.
Yet another approach, based on the fact that actually you want to substitute only the first occurrence of , inside the parenthesis:
:%s#\((.\{-}\),#\1 #
Explanation:
:%s for substitution in the whole file (don't use % if you want to work only with the current line)
we can use # or : as a delimiter to make the command more readable
in (.\{-} we ask to find any symbol (dot) after the left parenthesis and the rest stands for 0 or more occurrence (as few as possible) of this symbol. This expression is put inside \(...\) to be able to refer to this group as \1 in the future.
My previous question seems to be a bit ambiguous, I will rephrase it:
I have a file like this:
copythis abc
replacethis1 xyz
qwerty replacethis2
hasfshd replacethis3 fslfs
And so on...
NOTE: replacethis1, replacethis2, replacethis3, ... could be any words
How do I replace "replacethis1","replacethis2","replacethis3",.. word by "copythis" word by using minimum vim commands.
One way I can do is by these steps:
delete "replacethis1","replacethis2","replacethis3",.. by using 'dw'
copy "copythis" using 'yw'
move cursor to where "replacethis1" was and do 'p'; move cursor to where "replacethis2" was and do 'p' and so on...
Is there a better way to do this in VIM (using less number of vim commands)?
Since you changed your question, I'd do it this way:
Move to the first "replacethis1" and type cw (change word), then type "copythis" manually.
Move to the next "replacethis", hit . (repeat last operation)
Move to the next "replacethis", hit .,
and so on, and so on.
If "copythis" is a small word, I think this is the best solution.
The digit needs to be included, and there could be more than one instance per line:
:%s/replacethis\d/copythis/g
Given that "replacethis[1-3]" can be arbitrary unrelated words, the quickest/simplest way to do this globally would be:
:%s/replacethis1\|replacethis2\|replacethis3/copythis/g
(Note that you need to use \| to get the pipes to function as "or". Otherwise, vim will look for the literal | character.)
I've been struggling with this for a long time too, I think I just worked out the cleanest way:
Use whichever command is cleanest to put copythis into register r:
/copythis
"rye
Then go to the replacement and replace it with the contents of r:
/replacethis
cw<CTRL-R>r<ESC>
Then you can just n.n.n.n.n.n.n. for the rest of them, or if they're wildly different just go to the beginning of each and hit .
The key is replacing and pasting in one step so you can use . later.
:%s/copythis/replacethis/g
To replace all occurrences of copythis with replacethis. Or you can specify a range of line numbers like:
:8,10 s/copythis/replacethis/g
Note, the /g on the end will tell it to replace all occurrences. If you leave that off it will just do the first one.
create this mapping:
:map z cwcopythis^[
( ^[ is the escape character, you can type it in vim using Ctrl+V Ctrl+[ )
go to each word you want to replace and press z
if u need to do essentially the same action multiple times - swap 1st word of one line with second word of the next line, I say you could record a macro and call it whenever you need to
Have you tried string replacement?
%s/replacethis/copythis
A host of other parameters are possible to fine-tune the replacement. Dive into the Vim help for more details. Some more examples here.
You can remap e.g. the m key in normal mode to delete the word under the cursor and paste the buffer: :nnoremap m "_diwP.
Then you can just copy the desired word, move the cursor anywhere onto the to-be-replaced word and type m.
EDIT: Mapping to m is a bad idea since it is used to mark locations. But you can use e.g. ; anyway.