I am taking a course and stuck for almost a week. I created a VM and now it wants me to change the IP config method to static. The exact words are.
"You have created a ubuntu virtual machine in the second step, in which check the public IP (publicIpAllocationMethod) address and change it to Static by executing the azure CLI commands."
I created the VM with below command.
az vm create -n MyVm1 -g groupname --admin-username "n1234" --admin-password "nk123#9090" --location westUS --image UbuntuLTS
Got the VM NIC with below command.
nic_id=$(az vm show -g gropname -n MyVm1 -d --query networkProfile.networkInterfaces[0].id)
az network nic show --ids MyVm1VMNic
I have the IP of the VM but not sure how to change it to static.
I got it resolved by using the below command.
az network public-ip update -g GROUPNAME -n MyVm1PublicIP --allocation-method Static
What you're looking for can be found here: https://learn.microsoft.com/en-us/cli/azure/network/nic/ip-config?view=azure-cli-latest#az-network-nic-ip-config-update
With your example, you would run the following:
nic_id=$(az vm show -g gropname -n MyVm1 -d --query
networkProfile.networkInterfaces[0].id --output tsv)
nicName=$(az network nic show --ids $nic_id --query name --output tsv)
ipconfig=$(az network nic show --ids $nic_id --query ipConfigurations[0].name
--output tsv)
az network nic ip-config update -g gropname --nic-name $nicName -n $ipconfig --private-ip-address <static ip address>
By setting the private IP, the IP configuration will be updated to static. The above code relies on the VM having a single NIC, which is assumed based on your example.
Hopefully that helps!
Related
We are actually deploying container to Azure using Azure CLI and the create command as specify the sample documentation below :
https://learn.microsoft.com/en-us/azure/container-instances/container-instances-vnet
In this dosucmentation it is clearly specify from the sample command below that when the container and the Vnet/Subnet gets created, azure create for you a Network Profile Id ( that is need for yaml deplyoement)
az container create --name appcontainer --resource-group myResourceGroup --image mcr.microsoft.com/azuredocs/aci-helloworld --vnet aci-vnet --vnet-address-prefix 10.0.0.0/16 --subnet aci-subnet --subnet-address-prefix 10.0.0.0/24
After the container gets created successfully you are supposed to get Network profile name or ID, which you can obtain using "az network profile list"
Which in fact does not return anything
UPDATE :
I update m Azure CLI to 2.30 in powershell but the result is the same the output of the command return nohing even if container and vnet gets succesfully created
Output result
Thanks for your help
regards
I have tested in my environment.
I deployed a container to a new virtual network using the below command:
az container create --name appcontainer --resource-group myResourceGroup --image mcr.microsoft.com/azuredocs/aci-helloworld --vnet aci-vnet --vnet-address-prefix 10.0.0.0/16 --subnet aci-subnet --subnet-address-prefix 10.0.0.0/24
The container got successfully created.
To get the Network Profile ID, I used the below command:
az network profile list --resource-group myResourceGroup --query [0].id --output tsv
In this way, we can fetch the Network Profile ID
If network profile is not getting created using CLI, try using ARM template
The same happened to me. I solve it using Azure CLI version 2.27.2. Any newer version leaves me with the same problem.
There seems to be a problem with the latest versions of the Azure CLI
I am trying to find a way to delete an Instance in azure and all its associated resources. But I don't see any straightforward approach to accomplish it. I am using az vm delete -g resourcegroup -n myinstancename--yes command which currently only deletes instances. In my scenario, I can't use powershell.
For testing ,I created a VM with 1 NIC, 1 Public IP and 2 Data disks.
Then, I used the below az CLI script :
$osDisk = (az vm show --resource-group ansumantest --name ansumantest --query "storageProfile.osDisk.name" --output tsv)
$datadisks = (az vm show --resource-group ansumantest --name ansumantest --query "storageProfile.dataDisks[].name" --output tsv)
$nics= (az vm show --resource-group ansumantest --name ansumantest --query "networkProfile.networkInterfaces[].id" --output tsv)
foreach ($nic in $nics){
$publicIps=az network nic show --id $nic --query "ipConfigurations[].publicIpAddress.id" --output tsv
}
az vm delete --resource-group ansumantest --name ansumantest --yes
if ($osDisk) {
az disk show --resource-group ansumantest --name $osDisk --yes
}
foreach ($datadisk in $Datadisks){
az disk delete --resource-group ansumantest --name $datadisk --yes
}
foreach ($nic in $nics){
az network nic delete --id $nic
}
foreach ($publicIp in $publicIps){
az network public-ip delete --id $publicIp
}
Outputs:
OR
You can directly delete all the resources while the running the VM delete Command as well but there are some Prerequisites for this method i.e. While creating the VM using CLI you have to configure couple of features like below :
As per Microsoft Document in az vm create section:
[--os-disk-delete-option {Delete, Detach}]
Specify the behavior of
the managed disk when the VM gets deleted i.e whether the managed
disk is deleted or detached.
accepted values: Delete, Detach
[--data-disk-delete-option]
Specify whether data disk should be deleted or detached upon VM deletion.
[--nic-delete-option]
Specify what happens to the network interface when the VM is
deleted. Use a singular value to apply on all resources, or use = to
configure the delete behavior for individual resources. Possible
options are Delete and Detach.
If the above 3 are configured to delete while creating the VM then , when you run the az vm delete it defaults to delete these resources when the VM is to be deleted.
Reference:
Github Support
How to access the failover virtual machine in Azure from the open network . It does not show the Public IP in overview section. This is my trial account . Any answer would be helpful
If you want to connect to an Azure VM from the internet, the VM must have a public IP address associated with it. You can associate a public IP address to a virtual machine follow these steps.
For example, with Azure CLI, you can run
az login
az network public-ip create --name myVMPublicIP --resource-group myResourceGroup
az network nic ip-config update \
--name ipconfigmyVM \
--nic-name myVMVMNic \
--resource-group myResourceGroup \
--public-ip-address myVMPublicIP
I have a resource group with all of my networking in it. I need to create a VM in another resource group but using the vnets/subnet in the other resource group. It is failing miserably at the cli. Here's the command I'm using:
az vm create --name vm-jmp-poc-e --resource-group rg-mgmt-poc-eastus-001 --public-ip-address "" --image Win2016Datacenter --data-disk-sizes-gb 10 --admin-user adminuser --admin-password ThisIsThePass123$ --availability-set av-cpe-poc-eastus-001 --subnet subscriptions/938b61f6-ecac-4c61-ad3b-7e856c377660/resourceGroups/providers/Micosoft.Network/virtualNetworks/rg-sql-cpe-poc-eastus-001/vnet-primary-poc-eastus-001/subnets/snet-mgmt-poc-eastus-002 --location eastus
Here is the error:
ValidationError: incorrect usage: --subnet ID | --subnet NAME
--vnet-name NAME
Please help!!!
The problem is that you have provided a wrong subnet ID, the correct format is that
/subscriptions/<subscriptionID>/resourceGroups/<rgName>/providers/Microsoft.Network/virtualNetworks/<vnetName>/subnets/<subnetName>
You can get the subnet ID via
az network vnet subnet show -g <rgName> -n <subnetName> --vnet-name <vnetName> --query id -o tsv
You lack the resource group name in your providing subnet ID.
subscriptions/xxxx/resourceGroups/providers/Micosoft.Network/virtualNetworks/rg-sql-cpe-poc-eastus-001/vnet-primary-poc-eastus-001/subnets/snet-mgmt-poc-eastus-002
Result
I'm trying to automate few of our BAT script and for this our script need to know the private IP of each instances of VMSS(no public IP for instances).
Is there a way to query the private IP of all instances under a particular VMSS using azure cli. I tried few command of LB and VMSS but didn't find a solution yet.
az vmss show -g <rg> -n <vmss>
az vmss list-instances -g <rg> -n <vmss>
az vmss nic list-vm-nics -g <rg> --vmss-name <vmss> --ids <id>
az network lb address-pool list -g <rg> --lb-name <lb>
az vmss list-instance-connection-info -g <rg> -n <vmss>
Any help is highly appreciable and I'm not looking for powershell.
You can use the Azure CLI and bash command:
az vmss nic list -g groupName --vmss-name ScaleSetName | grep -w "privateIpAddress"
It can show all the private ips like this:
"privateIpAddress": "192.168.1.4",
"privateIpAddress": "192.168.1.5",