I have a script that checks if the PPTP VPN is running, and if not it reconnects the PPTP VPN. When I run the script manually it executes fine, but when I make a cron job, it's not running.
* * * * * /bin/bash /var/scripts/vpn-check.sh
Here is the script:
#!/bin/sh
/bin/ping -c3 192.168.17.27 > /tmp/pingreport
result=`grep "0 received" /tmp/pingreport`
truncresult="`echo "$result" | sed 's/^\(.................................\).*$$'`"
if [[ $truncresult == "3 packets transmitted, 0 received" ]]; then
/usr/sbin/pppd call home
fi
finally i found a solution ... instead of entering the cronjob with
crontab -e
i needed to edit the crontab file directly
nano /etc/crontab
adding e.g. something like
*/5 * * * * root /bin/bash /var/scripts/vpn-check.sh
and its fine now!
Thank you all for your help ... hope my solution will help other people as well.
After a long time getting errors, I just did this:
SHELL=/bin/bash
PATH=/bin:/sbin:/usr/bin:/usr/sbin
* * * * * /bin/bash /home/joaovitordeon/Documentos/test.sh
Where test.sh contains:
#!/bin/bash
/usr/bin/python3 /home/joaovitordeon/Documentos/test.py;
In my case, the issue was that the script wasn't marked as executable. To make sure it is, run the following command:
chmod +x your_script.sh
If you're positive the script runs outside of cron, execute
printf "SHELL=$SHELL\nPATH=$PATH\n* * * * * /bin/bash /var/scripts/vpn-check.sh\n"
Do crontab -e for whichever crontab you're using and replace it with output of the above command. This should mirror most of your environment in case there is some missing path issue or something else. Also check logs for any errors it's getting.
Though it definitly looks like the script has an error or you messed something up when copying it here
sed: -e expression #1, char 44: unterminated `s' command
./bad.sh: 5: ./bad.sh: [[: not found
Simple alternate script
#!/bin/bash
if [[ $(ping -c3 192.168.17.27) == *"0 received"* ]]; then
/usr/sbin/pppd call home
fi
Your script can be corrected and simplified like this:
#!/bin/sh
log=/tmp/vpn-check.log
{ date; ping -c3 192.168.17.27; } > $log
if grep -q '0 received' $log; then
/usr/sbin/pppd call home >>$log 2>&1
fi
Through our discussion in comments we confirmed that the script itself works, but pppd doesn't, when running from cron. This is because something must be different in an interactive shell like your terminal window, and in cron. This kind of problem is very common by the way.
The first thing to do is try to remember what configuration is necessary for pppd. I don't use it so I don't know. Maybe you need to set some environment variables? In which case most probably you set something in a startup file, like .bashrc, which is usually not used in a non-interactive shell, and would explain why pppd doesn't work.
The second thing is to check the logs of pppd. If you cannot find the logs easily, look into its man page, and it's configuration files, and try to find the logs, or how to make it log. Based on the logs, you should be able to find what is missing when running in cron, and resolve your problem.
Was having a similar problem that was resolved when a sh was put before the command in crontab
This did not work :
#reboot ~myhome/mycommand >/tmp/logfile 2>&1
This did :
#reboot sh ~myhome/mycommand >/tmp/logfile 2>&1
my case:
crontab -e
then adding the line:
* * * * * ( cd /directory/of/script/ && /bin/sh /directory/of/script/scriptItself.sh )
in fact, if I added "root" as per the user, it thought "root" was a command, and it didn't work.
As a complement of other's answers, didn't you forget the username in your crontab script ?
Try this :
* * * * * root /bin/bash /var/scripts/vpn-check.sh
EDIT
Here is a patch of your code
#!/bin/sh
/bin/ping -c3 192.168.17.27 > /tmp/pingreport
result=`grep "0 received" /tmp/pingreport`
truncresult=`echo "$result" | /bin/sed 's/^\(.................................\).*$/\1/'`
if [[ $truncresult == "3 packets transmitted, 0 received" ]]; then
/usr/sbin/pppd call home
fi
In my case, it could be solved by using this:
* * * * * root ( cd /directory/of/script/ && /directory/of/script/scriptItself.sh )
I used some ./folder/-references in the script, which didn't work.
The problem statement is script is getting executed when run manually in the shell but when run through cron, it gives "java: command not found" error -
Please try below 2 options and it should fix the issue -
Ensure the script is executable .If it's not, execute below -
chmod a+x your_script_name.sh
The cron job doesn’t run with the same user with which you are executing the script manually - so it doesn't have access to the same $PATH variable as your user which means it can't locate the Java executable to execute the commands in the script. We should first fetch the value of PATH variable as below and then set it(export) in the script -
echo $PATH can be used to fetch the value of PATH variable.
and your script can be modified as below - Please see second line starting with export
#!/bin/sh
export PATH=<provide the value of echo $PATH>
/bin/ping -c3 192.168.17.27 > /tmp/pingreport
result=`grep "0 received" /tmp/pingreport`
truncresult="`echo "$result" | sed 's/^\(.................................\).*$$'`"
if [[ $truncresult == "3 packets transmitted, 0 received" ]]; then
/usr/sbin/pppd call home
fi
First of all, check if cron service is running. You know the first question of the IT helpdesk: "Is the PC plugged in?".
For me, this was happening because the cronjob was executing from /root directory but my shell script (a script to pull the latest code from GitHub and run the tests) were in a different directory. So, I had to edit my script to have a cd to my scripts folder. My debug steps were
Verified that my script run independent of cron job
Checked /var/log/cron to see if the cron jobs are running. Verified that the job is running at the intended time
Added an echo command to the script to log the start and end times to a file. Verified that those were getting logged but not the actual commands
Logged the result of pwd to the same file and saw that the commands were getting executed from /root
Tried adding a cd to my script directory as the first line in the script. When the cron job kicked off this time, the script got executed just like in step 1.
it was timezone in my case. I scheduled cron with my local time but server has different timezone and it does not run at all. so make sure your server has same time by date cmd
first run command env > env.tmp
then run cat env.tmp
copy PATH=.................. Full line and paste into crontab -e, line before your cronjobs.
try this
/home/your site folder name/public_html/gistfile1.sh
set cron path like above
(I'm new in shell script.)
I've been stuck with this issue for a while. I've tried different methods but without luck.
Description:
When my script attempt to run another script (SiebelMessageCreator.sh, which I don't own) it prompts:
-bash: ./SiebelMessageCreator.sh: No such file or directory
But the file exists and has execute permissions:
-rwxr-xr-x 1 owner ownergrp 322 Jun 11 2015 SiebelMessageCreator.sh
The code that is performing the script execution is:
(cd $ScriptPath; su -c './SiebelMessageCreator.sh' - owner; su -c 'nohup sh SiebelMessageSender.sh &' - owner;)
It's within a subshell because I first thought that it was throwing that message because my script was running in my home directory (When I run the script I'm root and I've moved to my non-root home directory to run the script because I can't move my script [ policies ] to the directory where the other script resides).
I've also tried with the sh SCRIPT.sh ./SCRIPT.sh. And changing the shebang from bash to ksh because the SiebelMessageCreator.sh has that shell.
The su -c 'sh SCRIPT.sh' - owner is necessary. If the script runs as root and not as owner it brokes something (?) (that's what my partners told me from their experience executing it as root). So I execute it as the owner.
Another thing that I've found in my research is that It can throw that message if it's a Symbolic link. I'm really not sure if the content of the script it's a symbolic link. Here it is:
#!/bin/ksh
BASEDIRROOT=/path/to/file/cpp-plwsutil-c
ore-runtime.jar (path changed on purpose for this question)
java -classpath $BASEDIRROOT com.hp.cpp.plwsutil.SiebelMessageCreator
exitCode=$?
echo "`date -u '+%Y-%m-%d %H:%M:%S %Z'` - Script execution finished with exit code $exitCode."
exit $exitCode
As you can see it's a very siple script that just call a .jar. But also I can't add it to my script [ policies ].
If I run the ./SiebelMessageCreator.sh manually it works just fine. But not with my script. I suppose that discards the x64 x32 bits issue that I've also found when I googled?
By the way, I'm automating some tasks, the ./SiebelMessageCreator.sh and nohup sh SiebelMessageSender.sh & are just the last steps.
Any ideas :( ?
did you try ?
. ./SiebelMessageCreator.sh
you can also perform which sh or which ksh, then modify the first line #!/bin/ksh
Here is what I'm entering in Terminal:
curl --silent https://raw.githubusercontent.com/githubUser/repoName/master/installer.sh | bash
The WordPress installing bash script contains a "read password" command that is supposed to wait for users to input their MySQL password. But, for some reason, that doesn't happen when I run it with the "curl githubURL | bash" command. When I download the script via wget and run it via "sh installer.sh", it works fine.
What could be the cause of this? Any help is appreciated!
If you want to run a script on a remote server without saving it locally, you can try this.
#!/bin/bash
RunThis=$(lynx -dump http://127.0.0.1/example.sh)
if [ $? = 0 ] ; then
bash -c "$RunThis"
else
echo "There was a problem downloading the script"
exit 1
fi
In order to test it, I wrote an example.sh:
#!/bin/bash
# File /var/www/example.sh
echo "Example read:"
read line
echo "You typed: $line"
When I run Script.sh, the output looks like this.
$ ./Script.sh
Example read:
Hello World!
You typed: Hello World!
Unless you absolutely trust the remote scripts, I would avoid doing this without examining it before executing.
It wouldn't stop for read:
As when you are piping in a way you are forking a child which has been given input from parent shell.
You cannot give the values back to parent(modify parent's env) from child.
and through out this process you are always in parent process.
I’m trying to run a Condor job where the executable is a shell script which invokes certain Java classes.
Universe = vanilla
Executable = /script/testingNew.sh
requirements = (OpSys == "LINUX")
Output = /locfiles/myfile.out
Log = /locfiles/myfile.log
Error = /locfiles/myfile.err
when_to_transfer_output = ON_EXIT
Notification = Error
Queue
Here’s the content for /script/testingNew.sh file –
(Just becaz I’m getting error, I have removed the Java commands for now)
#!/bin/sh
inputfolder=/n/test_avp/test-modules/data/json
srcFolder=/n/test_avp/test-modules
logsFolder=/n/test_avp/test-modules/log
libFolder=/n/test_avp/test-modules/lib
confFolder=/n/test_avp/test-modules/conf
twpath=/n/test_avp/test-modules/normsrc
dataFolder=/n/test_avp/test-modules/data
scriptFolder=/n/test_avp/test-modules/script
locFolder=/n/test_avp/test-modules/locfiles
bakUpFldr=/n/test_avp/test-modules/backupCurrent
cd $inputfolder
filename=`date -u +"%Y%m%d%H%M"`.txt
echo $filename $(date -u)
mkdir $bakUpFldr/`date -u +"%Y%m%d"`
dirname=`date -u +"%Y%m%d"`
flnme=current_json_`date -u +"%Y%m%d%H%M%S"`.txt
echo DIRNameis $dirname Filenameis $flnme
cp $dataFolder/current_json.txt $bakUpFldr/`date -u +"%Y%m%d"`/current_json_$filename
cp $dataFolder/current_json.txt $filename
mkdir $inputfolder/`date -u +"%Y%m%d"`
echo Creating Directory $(date -u)
mv $filename $filename.inprocess
echo Created Inprocess file $(date -u)
Also, here’s the error log from Condor –
000 (424639.000.000) 09/09 16:08:18 Job submitted from host: <135.207.178.237:9582>
...
001 (424639.000.000) 09/09 16:08:35 Job executing on host: <135.207.179.68:9314>
...
007 (424639.000.000) 09/09 16:08:35 Shadow exception!
Error from slot1#marcus-8: Failed to execute '/n/test_avp/test-modules/script/testingNew.sh': (errno=8: 'Exec format error')
0 - Run Bytes Sent By Job
0 - Run Bytes Received By Job
...
012 (424639.000.000) 09/09 16:08:35 Job was held.
Error from slot1#marcus-8: Failed to execute '/n/test_avp/test-modules/script/testingNew.sh': (errno=8: 'Exec format error')
Code 6 Subcode 8
...
Can anyone explain whats causing this error, also how to resolve this?
The testingNew.sh scripts run fine on the Linux box, if executed on a network machine seperately.
Thx a lot!! - GR
The cause, in our case, was the shell script using DOS line endings instead of Unix ones.
The Linux kernel will happily try to feed the script not to /bin/sh (as you intend) but to /bin/sh
. (Do you see that trailing carriage return character? Neither do I, but the Linux kernel does.) That file doesn't exist, so then, as a last resort, it will try to execute the script as a binary executable, which fails with the given error.
You need to specify input as:
input = /dev/null
Source: Submitting a job to Condor
fileexist=0
mv /data/Finished-HADOOP_EXPORT_&Date#.done /data/clv/daily/archieve-wip/
fileexist=1
--some other script below
Above is the shell script I have in which in the for loop, I am moving some files. I want to notify myself via email if something wrong got happened in the moving process, as I am running this script on the Hadoop Cluster, so it might be possible that cluster went down while this was running etc etc. So how can I have better error handling mechanism in this shell script? Any thoughts?
Well, atleast you need to know "What are you expecting to go wrong". based on that you can do this
mv ..... 2> err.log
if [ $? -ne 0 ]
then
cat ./err.log | mailx -s "Error report" admin#abc.com
rm ./err.log
fi
Or as William Pursell suggested, use-
trap 'rm -f err.log' 0; mv ... 2> err.log || < err.log mailx ...
mv may return a non-zero return code upon error, and $? returns that error code. If the entire server goes down then unfortunately this script doesn't run either so that's better left to more advanced monitoring tools such as Foglight running on a different monitoring server. For more basic checks, you can use method above.