I want to concatenate a variable in side a formula, but I cannot get it to work:
For char_index = 1 To 48
Cells(char_index, 2).Formula = "=MID('mysheet'!$B$8;" & CStr(char_index) & ";1)"
Next char_index
The idea is that the formula is added to column B from row 1 to 48 (or B1:B48).
cells(char_index, 2).Formula = "=MID('mysheet'!$B$8," & CStr(char_index) & ",1)"
Even if for your localization the list/formula separator is ";", in VBA you have to use "," and it will write the formula in the appropriate way...
Related
I have two formulas that I need to transfer to VBA.
On Excel, my formula would be =countif(A$2:A2,A2) so I transferred that using this formula but everything is returning to 1. The rows didn't become dynamic and I want only the values to be displayed.
For a = 2 To lrow
ws.Range("T" & a).Formula = "=CountIf(A$2&"":""&A2)"",""&A2)"
Next a
Next formula that I use in Excel is
=IF(COUNTIF(A:A,A2)>Q2,"Check","Ok")
I tried this formula in VBA:
For i = 2 to lrow
If Countif(ws.Range("A2:A" & lrow), "A2") > ws.Range("Q2:Q", & lrow) Then
ws.Range("T" & i).Value = "Check"
Else
ws.Range("T" & i).Value = "Ok"
End If
Next i
You could populate column T with your first formula with this line of code:
ws.Range("T2:T" & lrow).FormulaR1C1 = "=COUNTIF(R2C[-19]:RC[-19],RC[-19])"
I can't advise on your second formula unless you clarify where you want to write it...
I am trying to insert a SUMIF formula into a cell using VBA. VBA is not allowing my code to run as it is. Any suggestions are appreciated.
ws and na are properly set earlier on in the code. If I simply change the SUMIF formula to a random value "x" , it appears in the desired cell. The error is occurring within the SUMIF formula that I am trying to insert into a cell.
ws.Range("B" & na.Row + 2).Value = "=SUMIF(OFFSET(B1,,,ROW()-1,1),"<>#N/A"))"
The purpose of this formula is to SUM a column of numbers while ignoring any cells that contain "#N/A".
When using quotes in a formula, you need to "double up":
ws.Range("B" & na.Row + 2).Formula = "=SUMIF(OFFSET(B1,,,ROW()-1,1),""<>#N/A"")"
You can use AGGREGATE and remove the OFFSET which is volatile
ws.Range("B" & na.Row + 2).Formula= "=AGGREGATE(9,6,B1:B" & na.Row + 1 & ")"
Try using 'Chr(34)':
ws.Range("B" & na.Row + 2).Formula = "=SUMIF(OFFSET(B1,,,ROW()-1,1)," & Chr(34) & "<>#N/A" & Chr(34) & ")"
Edit: Deleted quotes written by mistake
This is my piece of code:
For loopi = maxlastrow + 3 To lastrowrangetotal
issuerformula = Cells(loopi, 4).Address(rowabsolute:=False, columnabsolute:=False)
Worksheets("Dashboard").Cells(loopi, 4).Formula = "=BDP(""&issuerformula.value&"",""ISSUER"")"
Next loopi
this part assign a variable to a cell expressed in "letter / number", let's say D35 in this case.
This piece of code manage to transform a cell expressed as cell(2,2) for example into B2 :
issuerformula = Cells(loopi, 4).Address(rowabsolute:=False, columnabsolute:=False)
I would like to use this variable to have in my cell the formula "=BDP(B2,"ISSUER")"
However, the way it is coded now returns that : =BDP("&issuerformula.value&","ISSUER")
I tried several combinations, removing ".value", doubling or tripling """,... no chance for me.
What would be the correct combination to do that in this formula Worksheets("Dashboard").Cells(loopi, 4).Formula = "=BDP(""&issuerformula.value&"",""ISSUER"")"
it's ok I found the answer myself, it was a matter of blank
so, this works...
For loopi = maxlastrow + 3 To lastrowrangetotal
issuerformula = Cells(loopi, 4).Address(rowabsolute:=False, columnabsolute:=False)
Worksheets("Dashboard").Cells(loopi, 4).Formula = "=BDP(" & issuerformula & ",""ISSUER"")"
Next loopi
I have to calculate the difference between the values of 2 columns(firstCol and lastCol) and set those differences in a different column(NextColumn). The row count keeps changing, so I have to calculate the rowCount before calculating the difference. I'm trying to write a loop using Range so that the difference can be calculated but it doesn't seem to work.
For i = 3 To lastRow
Range(Cells(3, NextColumn), Cells(lastRow, NextColumn)).FormulaR1C1 = "=Range(Cells(i, firstCol),Cells(i,firstCol)).Value - Range(Cells(i, lastCol),Cells(i,lastCol)).Value"
Next i
Any help would be greatly appreciated!
Thank you
Nick
For any input of "i" into the formula, you need to use " & i & " when using using a formula="", such as:
"=A" & i & "+B" & i
When you change to just a formula that doesn't input a formula to the cell (math happens in VBA), you can ignore the Excel formatting and "" blocking, such as:
= Cells(i,"A").Value + Cells(i,"B").Value
Make sure to use your loop variable where appropriate, so that you would have an outcome in a loop like:
Dim i as Long
For i = 1 to 10
Cells(i,"C").Formula = Cells(i,"A").Value + Cells(i,"B").Value
Next i
Why looping ? Unless I misunderstood the question, something like this should do the trick:
Range("X3:X"& lastrow).Formula = "=C3-D3"
The formula will adjust.
vba needs to be outside the quotes and you do not need the loop:
Range(Cells(3, NextColumn), Cells(lastRow, NextColumn)).Formula = "=" & Cells(3, firstCol).Address(0, 0) & "-" & Cells(3, lastCol).Address(0, 0)
No loop needed. Excel will change the relative references as needed.
Hello dear StackOverflow users,
My issue is regarding inserting a Formular via Macro into specific range of cells. Again, again and again.
So the Basic function of the formula should be the following:
=WHEN('ZEK '!F3="X";"6";WHEN('ZEK '!G3="X";"8";"1"))
In my macro it has to Change the column for the next specific range.
This is Happening in a for Loop for i growing.
meaning --> =When('ZEK '!$F$"& i+2 &".......
or in any other Syntax that should work. My try fairly does not, thats why I need your help.
This is my Initial try where i exchanged literally everything with strings:
Sub 123()
Dim a,b,c As String
a = 1
b = 6
c = 8
....
'used and declared variables k, x, f, a, b, c
Range(Cells(k + 2, 5), Cells(k + 27, 5)).FormulaR1C1 = _
"=WHEN('ZEK'!$F$" & f & "=" & x & ";" & a & ";WHEN('ZEK'!$G$" & f & "=" & x & ";" & b & ";" & c & "))"
End Sub
With that i get Runtime Error 1004. (changed it to .Formula from .FormulaR1C1)
I hope i gave enough Information, so that you could help me.
This really does not have to be performant, i just Need to get the formula into about 100.000 cells with i changing for each Range of cells
I think it's a language problem... Try
"=IF('ZEK'!$F$" & f & "=" & x & "," & a & ",IF('ZEK'!$G$" & f & "=" & x & "," & b & "," & c & "))"
Notice the use of IF and , as a delimiter instead of ;. Is WHEN even a valid worksheet function? To be honest I don't know if the worksheet functions get translated or not when setting the formula via VBA. The delimiters are adapted though.
edit: there is also the .FormulaLocal property that should work with ; as delimiter! So change .Formula to .FormulaLocal. This will probably cause an error if you execute it on a machine that uses , as default delimiter so I'd try to stick with .Formula.