I'm trying to compile the Pulse Effects project and I faced this issue after running meson build:
Dependency gstreamer-1.0 found: NO (tried pkgconfig and cmake)
src/meson.build:97:0: ERROR: Dependency "gstreamer-1.0" not found, tried pkgconfig and cmake
But surely it has been installed and sudo apt install gstreamer-1.0 says:
libqt5gstreamer-1.0-0 is already the newest version (1.2.0-5).
gir1.2-gstreamer-1.0 is already the newest version (1.14.5-0ubuntu1~18.04.1)
I use ubuntu 18.04.
Any idea?
Finally installing the package libgstreamer1.0-dev got the job done.
The problem was that the pkg-config's name of gstreamer is gstreamer-1.0 but the actual package name for development files is libgstreamer1.0-dev and in the meson.build file it was mentioned just as gstreamer-1.0.So that was confusing.
Hope it helps the future readers.
Related
I got the following error after running cmake for this :
Could NOT find Qt5FontDatabaseSupport (missing:
Qt5FontDatabaseSupport_LIBRARY Qt5FontDatabaseSupport_INCLUDE_DIR) (found
version "5.12.8")
I cannot find any package with that name in my linux repository.
That is one of the dependencies for the Qt QPA plugin , as stated in the CMakeLists.txt comments.
I use Kubuntu 20.04 with cmake 3.16 and Qt5.12.
Thanks.
Most likely you don't have the build dependencies installed. Qt5FontDatabaseSupport is part of the gui Qt module, for which the headers and devel files are installed with the qtbase5-dev package.
Kwin has many more build dependencies than qtbase, so the best if you install all of them with:
sudo apt build-dep kwin
at once, or with
sudo apt build-dep kwin-wayland
if you want to hack it under wayland.
I've Redhat 7.2 running Cinnamon, and hate the docks provided, how come I can't resize the area a widgit is allocated? All apps are jammed into half the dock.
Drives me to compile cairo-dock from source as it isn't an ibm redhat blessed package.
cmake .. -DCMAKE_INSTALL_PREFIX=/usr
...
-- checking for module 'wayland-client>=1.0.0'
-- package 'wayland-client>=1.0.0' not found
-- checking for module 'gtk+-3.0>=3.4.0'
-- package 'gtk+-3.0>=3.4.0' not found
so I find gtk version is 3.14.13-16.el7 using yum list installed "gtk*"
I downloaded gtk 3.4.4 and compiled it and follow the INSTALL provided, sudo make install, which completes with no errors
rerunning cmake gives me the same error, so I'm wondering if I had to remove 3.14? I'm not really sure how best to proceed and thought it best to get some advice. I'm not really in the mood to break things. Thanks for your time and consideration.
Calvin, I'm also IBMer and installed RHEL7.2 from IBM's image.
I could successfully download the sources and install Cairo Docker and respective plugins.
I followed the instructions in this page here:
Glx-Dock - Generic:Compilation
First, install all dependencies below from official IBM repository.
I used the same package names for the Fedora dependencies and some may NOT exist for RHEL. Therefore, some plugins won't be available by fetching dependencies from official repository only - but the Cairo Docker will work.
sudo yum install cmake make pkgconfig gcc gcc-c++ gettext glib2-devel\
cairo-devel librsvg2-devel dbus-glib-devel libxml2-devel libXrender-devel\
mesa-libGL-devel mesa-libGLU-devel pango-devel libXxf86vm-devel\
libXtst-devel libXrandr-devel libX11-devel libcurl-devel gtk3-devel\
vte3-devel lm_sensors-devel libxklavier-devel libexif-devel\
libetpan-devel gnome-menus-devel alsa-lib-devel libical-devel\
upower-devel libzeitgeist-devel
Untar the packages and build with the commands described there except that you need to force the lib64 in both main and plugin builds with:
cmake .. -DCMAKE_INSTALL_PREFIX=/usr -DFORCE_LIB64=yes
OK, so I have gone up and down the internet trying to figure out what it is I am doing wrong ... and yet I'm in the middle of nowhere.
I am basically trying to install the FFmpeg on my CENTOS 6.6 dedicated server by following the instructions here: https://trac.ffmpeg.org/wiki/CompilationGuide/Centos
Everything seems to go just fine throughout the process. When it's all done, I type in "ffmpeg" hit the enter and keep on getting this extremely ugly error:
-bash: -bash:: command not found
I'm not much of a shell guy, but working with it all day today, I can say that this means that it's not installed correctly. So, I tried re-installing it, and it tells me all the packages already exist now ... . Here is a copy if what I am doing and what I am getting:
root#server1 [~]# ffmpeg -version
-bash: ffmpeg: command not found
root#server1 [~]# yum install autoconf automake gcc gcc-c++ git libtool make nasm pkgconfig zlib-devel
Loaded plugins: fastestmirror, priorities, security
Setting up Install Process
Loading mirror speeds from cached hostfile
* base: centos.mirror.ndchost.com
* extras: centos-distro.cavecreek.net
* updates: mirrors.easynews.com
Package autoconf-2.63-5.1.el6.noarch already installed and latest version
Package automake-1.11.1-4.el6.noarch already installed and latest version
Package gcc-4.4.7-11.el6.x86_64 already installed and latest version
Package gcc-c++-4.4.7-11.el6.x86_64 already installed and latest version
Package git-1.7.1-3.el6_4.1.x86_64 already installed and latest version
Package libtool-2.2.6-15.5.el6.x86_64 already installed and latest version
Package 1:make-3.81-20.el6.x86_64 already installed and latest version
Package nasm-2.07-7.el6.x86_64 already installed and latest version
Package 1:pkgconfig-0.23-9.1.el6.x86_64 already installed and latest version
Package zlib-devel-1.2.3-29.el6.x86_64 already installed and latest version
Nothing to do
Any ideas or help is greatly appreciated!
OK, after paying more attention, I realized that there was an error
Unable to create and execute files in /tmp. Set the TMPDIR environment
variable to another directory and make sure that it is not mounted noexec.
Sanity test failed.
So, I just made the /tmp directory and ran this:
export TMPDIR=$HOME/tmp
And then ran the installation command!
I'm running Fedora 19 x64, and
I'm trying to install xmobar via cabal install. After installing a bunch of dependencies, I'm stuck at
cabal: Missing dependency on a foreign library:
* Missing C library: iw
I can't find anything about this iw library and I'm a bit lost at how to continue.
I've got all of the standard c libs installed, as far as I can tell.
sudo yum install glibc-common glibc glibc-devel glibc-headers glibc-utils glibc-devel glib2-devel gcc-c++ gcc
Loaded plugins: auto-update-debuginfo, langpacks, refresh-packagekit
Package glibc-common-2.17-18.fc19.x86_64 already installed and latest version
Package glibc-2.17-18.fc19.x86_64 already installed and latest version
Package glibc-devel-2.17-18.fc19.x86_64 already installed and latest version
Package glibc-headers-2.17-18.fc19.x86_64 already installed and latest version
Package glibc-utils-2.17-18.fc19.x86_64 already installed and latest version
Package glibc-devel-2.17-18.fc19.x86_64 already installed and latest version
Package glib2-devel-2.36.3-3.fc19.x86_64 already installed and latest version
Package gcc-c++-4.8.1-1.fc19.x86_64 already installed and latest version
Package gcc-4.8.1-1.fc19.x86_64 already installed and latest version
Nothing to do
Under Ubuntu the same workaround:
cabal: Missing dependency on a foreign library:
* Missing C library: iw
was resolved though I thought that it can be also two libraries for C language build tools:
liwc : Tools for manipulating C source code
iwyu : Analyze #includes in C and C++ source files
after these additions & libiw-dev library new xmobar was compiled.
Libraries are packaged differently by your OS. For fedora, if you're missing library A, you often will find packages named libA and libA-devel. Luckily, you don't need to guess - instead just ask yum what packages has some file of interest. Below, I asked about the shared object file libiw.so.
yum whatprovides *libiw.so*
...
1:wireless-tools-devel-29-9.1.fc19.x86_64 : Development headers for the
: wireless-tools package
Repo : fedora
Matched from:
Filename : /usr/lib64/libiw.so
1:wireless-tools-29-9.1.fc19.x86_64 : Wireless ethernet configuration tools
Repo : installed
Matched from:
Provides : libiw.so.29()(64bit)
Filename : /lib64/libiw.so.29
I'm surprised Fedora would install without these packages, but if that's the case then obtaining the packages is just a yum install command away.
For anyone trying to install xmobar through cabal on arch,
the missing package that includes iw is called wireless_tools.
You can install that with
pacman -S wireless_tools
I cannot build Poppler 0.14.1 from source code on CentOS 5.4. When I do ./configure it ends with a message like:
checking for FONTCONFIG... configure:
error: Package requirements
(fontconfig >= 2.0.0) were not met:
I have successfully built from source code, and installed
fontconfig 2.8.0
on that machine, and also set the PKG_CONFIG to point to the folder that contains the fontconfig.pc (/usr/local/lib/pkgconfig/).
It is true that when I do $PKG_CONFIG --version fontconfig it gets echos '0.20' but the fontconfig.pc does write that the version of the library is 2.8.0. Also there are no other libfontconfig.so other then the one build from source on that machine, so I am sort of stuck and not sure what to do (except debugging configure)
Has anyone solved a similar case before?
Thanks
Peter
Check if the package fontconfig-devel is installed. If not, install it and then try your build again.
For debian squezee, I've had to install packages manually from the sources:
http://cgit.freedesktop.org/fontconfig/
(Download directly, not use the git because there are problems when configure)
And BTW, very useful guide to install poopler and dependences from the scratch:
http://www.linuxfromscratch.org/blfs/view/svn/general/poppler.html