I have a changelist where I've deleted a few files after consolidating their functionality. P4v errors when trying to shelve the removed files with the message "The system cannot find the file specified". (Hey perforce, that's kinda the point).
Is there any way to shelve this as a "pending deletion"? Keeping these files around would cause errors in my code. Even making them blank is a bit sketchy.
Open it for delete instead of edit. This is p4 delete at the command line, or "Mark for Delete" in P4V. (If it's currently open for edit, you might need to revert it first and then open it for delete instead.)
Related
I do not want to go "Get Revision" > "Force". Because half of my stuff is already downloaded. I don't want to overwrite what I already have. P4V Can clearly see that what is in the depot and what is local is completely different. How can I get Perforce to retrieve the files I do not have, and ignore the ones I already do?
Select your workspace root, go to File > Open Command Window Here, and run:
p4 clean
This will scan your workspace and force-sync everything that's different or missing, as well as deleting unadded files. Note that if you have local work that isn't in a changelist, this will irrevocably erase it. If you only want to "clean" files that are edited/present but out of date (and disregard added/deleted files), do p4 clean -e instead. If you want to preview the operation before doing it for real, do p4 clean -n.
I think you can do the equivalent via the "Reconcile Offline Work" tool in P4V, but it may require additional manual steps.
To make working with Perforce easier, try to avoid modifying files in your workspace that are read-only -- if you want to remove a file from your workspace, use "remove from workspace" in P4V rather than manually deleting it, etc. Perforce is able to make file operations very fast by virtue of knowing what's in your workspace and not having to re-check it each time, but you eliminate that benefit when you mess with your workspace manually.
Instead of p4 clean, you could do:
reconcile offline work on root of workspace then a pop-up saying that you deleted some files and it is going to delete them from Depot of the server as well make sure you added to default or new changelist or whatever. Accept.
Go to changelist and right-click press revert files to bring back the deleted/missing files.
When I shelve a pending changelist, changes to existing files are reverted, but newly added files are not deleted from the filesystem. I need to manually delete these files every time I perform a shelve operation. Is there anyway to automatically delete newly added files when shelving?
in p4, if you're willing to make it two operations, you can do a normal shelve on the changelist, and then do p4 revert -w on the same changelist, which deletes added files. i'm not sure how to do this in p4v.
It looks like P4V added this in a recent release!
https://www.perforce.com/perforce/doc.current/user/p4vnotes.txt
#40757 (Changes #1619278, #1618572)
The Shelve Dialog has an option to remove the files from disk that are marked for
'Add'.
To do this in p4v, you can create a custom tool, say "revert-added-file-and-delete", adding it to applicable context menus, with application p4 and arguments revert -w %F.
Unless someone knows of a way to chain custom tools together (and I couldn't find a way to do it), to do a shelve/revert will require a separate shelve followed by a use of the custom command, revert-added-file-and-delete.
Sure, except that shelving work is a fundamentally different beast. If I create a new class that uses a new function in an existing class, and then shelve both files, the new class remains, and is now referencing a non-existent function in the existing class. Now I've got build errors and have to manually delete the new file in order to get back to a clean slate, which is exactly what shelving work should do for me.
p4 shelve -c changelist_number
p4 revert -w -c changelist_number //...
I don't think that there is a way to do this. This behavior is consistent with reverting files that have been added. If you 'p4 add' a file and then revert it, it will not be deleted on revert. Seems like it would be bad behavior if it did! Losing a file and the work that has gone into the file on a revert would be very bad. Consider this: you code up a file in your editor, you save diligently, and finally you are ready to 'p4 add' it to perforce. Then you decide you don't want to do this so you revert and then you lose your file???
So reverting adds won't delete the file.
I deleted a file from Perforce in the last month. Is there a way to retrieve it from P4?
If so, what command can I use?
Note: I'm not the admin for p4. And I don't want the file back in P4 but I just want it in my local workspace.
Also, I don't know the exact timeframe when I deleted it in last month...What command can I run?
I'm running P4 on windows. I'll appreciate if someone can provide equivalent command for windows
Thanks!
When you delete a file in Perforce, it creates a "deleted" revision, but the archive file is still there.
In the Perforce P4V GUI in the depot veiw, there is a filter symbol on top of the explore pane .
Click on this and select "Show Deleted Depot Files".
Find the file you want to restore and right-click on it. Select "Rollback..." and revert it to the previous revision of that file (before it was deleted.)
By default it will create a new changelist, be sure to select the one you want if you already have one.
On the command line:
p4 sync //depot/folder/subfolder/filename#changelist
You can use either the command line or the GUI, from the command line p4 sync -f forces the files to be resynchronized. For more information see the Perforce Knowledge Base.
If you haven't committed the change list of deleted files to the repository, right click on the folder containing the deleted files in p4v and choose Get Revision. Be sure to check Force Operation and then Click Get Revision. Then the deleted files will be restored from p4 server.
ref: https://forums.perforce.com/index.php?/topic/1479-how-to-restore-files-deleted-in-p4c-workspace/#entry4726
I accidentally created a new changelist with files from WORKSPACE not from DEPOT and now under the changelist 4500 modified files are displayed (all dlls pdbs etc. alongside with the files i actually edited)
I'm using the p4v GUI. Is there anyway to undo this, without having to backup all the files then revert them using perforce, put them back and create a new changelist using DEPOT.
Thanks a lot, i hope there's a workaround :).
Not sure if this is what you're looking for, but to remove checked out files from your changelist without removing the edits:
p4 revert -k -c changelist# //...
If you haven't submitted the changelist, and all of the files are marked with '+' in the changelist in the Pending tab, you can click 'Revert' on the changelist. As long as the files were marked for add ('+') they'll be left intact in your workspace.
There's multiple ways.
Select View->Pending Changelists from the menu bar to view your pending changelist tab. You should see all of your checked out files grouped by changelist. Go to your desired changelist and expand into files.
You can Ctrl+left-click multiple files, then right-click on one of them and select Move to another changelist....
You can also choose to Submit... the files, and when the dialog box appears, their will be checkboxes next to each file. Uncheck the files you do not want to submit.
As another answerer mentioned, if you accidentally added files to Perforce that you did not intend to, you can indeed revert those files without actually deleting them (the only time a file will actually go away is when you do a p4 delete or p4 move.)
I encountered a similar issue, the solution i used is as follows:
1. Navigate to the workspace using p4v
2. Right click on one of the folders or files and click "Open Command window here"
3. run the following command to review dll or pdb respectively
p4 revert //....dll
p4 revert //....pdb
Thanks,
Lyon
If you right click on a pending changelist in p4v you should have the option to Revert unchanged files, which does exactly what it says on the tin.
Sometimes I "Mark for Add" and add files to Perforce which I actually didn't want Perforce to worry about.
Is there a way to revert it so it just goes back to showing in P4V as an "untracked" item?
See my example:
I've added mil.ico and mil3.ico by mistake. I just want them to go back to looking like test.ico, ie. ignored by Perforce:
Even if I save a copy of the files, then delete, then put them back (all of which is a serious bore), P4V still knows they have a history and marks them as shown:
I just want Perforce to leave a file alone when I tell it to.
If you want to remove the last traces of the files from perforce, your only chance is through p4 obliterate. This will irreversibly remove file revisions or even file's complete history from perforce and will only work with administrator privileges. I don't know if obliterate is available through p4v, on the command line you would issue:
cd directory_of_accident
p4 obliterate accidentally_submitted_file
and if it looks like you and perforce agree on the file to forget
p4 obliterate -y accidentally_submitted_file
to seal the issue.
You can delete the items from the Perforce depot. Keep in mind Perforce will want to delete your local copy of that file so you should save it off in a different location, delete the file in Perforce and move the local version back.
Are you looking at your file structure through the Depot tab or the Workspace tab? It looks like it may be your Depot tab.
Try going to your Workspace tab then click on the Filter icon (looks more like a funnel) and ensure that "Show Files Not in Depot" is selected.
Hopefully looking through the Workspace tab, as opposed to Depot, will hide the deleted files, and selecting the appropriate filters will show your non-Perforce files.