Steps:
Installed coverity
Configured compiler
cov-configure --javascript
cov-configure --cs
I am stuck at the build step of cov-build. Yarn is used to run and configure the service. But I am not sure what coverity wants here.
I tried a couple of npm run commands, every time end up getting this:
[WARNING] No files were emitted. This may be due to a problem with your configuration
or because no files were actually compiled by your build command.
Please make sure you have configured the compilers actually used in the compilation.
I also tried different compilers, but no luck.
What should be done in this case?
You need to do a file system capture for Javascript files. You can accomplish this by running cov-build with the --no-command flag.
cov-build --dir CoverityIntermedediateDir --no-command --fs-capture-list list.txt
Lets break down these commands:
--dir: intermediate directory to store the emitted results (used for cov-analyze later).
--no-command: Do not run a build command and to look for certain file types
--fs-capture-list: Use the file that is provided to specify which files to look at and possibly emit to the intermediate directory.
A recommended way to generate the list.txt file is to grab it from your source control. If using git run:
git ls-files > list.txt
I want to also point out that if you don't have a convenient way to get a file listing in order to use the --fs-capture-list command you can use --fs-capture-search command and pair that with a filter to exclude the node_modules directory.
The coverity forums have some useful questions and answers:
Node.js File system capture
Really, the best place to look is at the documentation. There are several examples of what you want to do in their guides.
Related
I'm trying to use add_custom_command to generate a file during the build. The command never seemed to be run, so I made this test file.
cmake_minimum_required( VERSION 2.6 )
add_custom_command(
OUTPUT hello.txt
COMMAND touch hello.txt
DEPENDS hello.txt
)
I tried running:
cmake .
make
And hello.txt was not generated. What have I done wrong?
The add_custom_target(run ALL ... solution will work for simple cases when you only have one target you're building, but breaks down when you have multiple top level targets, e.g. app and tests.
I ran into this same problem when I was trying to package up some test data files into an object file so my unit tests wouldn't depend on anything external. I solved it using add_custom_command and some additional dependency magic with set_property.
add_custom_command(
OUTPUT testData.cpp
COMMAND reswrap
ARGS testData.src > testData.cpp
DEPENDS testData.src
)
set_property(SOURCE unit-tests.cpp APPEND PROPERTY OBJECT_DEPENDS testData.cpp)
add_executable(app main.cpp)
add_executable(tests unit-tests.cpp)
So now testData.cpp will generated before unit-tests.cpp is compiled, and any time testData.src changes. If the command you're calling is really slow you get the added bonus that when you build just the app target you won't have to wait around for that command (which only the tests executable needs) to finish.
It's not shown above, but careful application of ${PROJECT_BINARY_DIR}, ${PROJECT_SOURCE_DIR} and include_directories() will keep your source tree clean of generated files.
Add the following:
add_custom_target(run ALL
DEPENDS hello.txt)
If you're familiar with makefiles, this means:
all: run
run: hello.txt
The problem with two existing answers is that they either make the dependency global (add_custom_target(name ALL ...)), or they assign it to a specific, single file (set_property(...)) which gets obnoxious if you have many files that need it as a dependency. Instead what we want is a target that we can make a dependency of another target.
The way to do this is to use add_custom_command to define the rule, and then add_custom_target to define a new target based on that rule. Then you can add that target as a dependency of another target via add_dependencies.
# this defines the build rule for some_file
add_custom_command(
OUTPUT some_file
COMMAND ...
)
# create a target that includes some_file, this gives us a name that we can use later
add_custom_target(
some_target
DEPENDS some_file
)
# then let's suppose we're creating a library
add_library(some_library some_other_file.c)
# we can add the target as a dependency, and it will affect only this library
add_dependencies(some_library some_target)
The advantages of this approach:
some_target is not a dependency for ALL, which means you only build it when it's required by a specific target. (Whereas add_custom_target(name ALL ...) would build it unconditionally for all targets.)
Because some_target is a dependency for the library as a whole, it will get built before all of the files in that library. That means that if there are many files in the library, we don't have to do set_property on every single one of them.
If we add DEPENDS to add_custom_command then it will only get rebuilt when its inputs change. (Compare this to the approach that uses add_custom_target(name ALL ...) where the command gets run on every build regardless of whether it needs to or not.)
For more information on why things work this way, see this blog post: https://samthursfield.wordpress.com/2015/11/21/cmake-dependencies-between-targets-and-files-and-custom-commands/
This question is pretty old, but even if I follow the suggested recommendations, it does not work for me (at least not every time).
I am using Android Studio and I need to call cMake to build C++ library. It works fine until I add the code to run my custom script (in fact, at the moment I try to run 'touch', as in the example above).
First of,
add_custom_command
does not work at all.
I tried
execute_process (
COMMAND touch hello.txt
)
it works, but not every time!
I tried to clean the project, remove the created file(s) manually, same thing.
Tried cMake versions:
3.10.2
3.18.1
3.22.1
when they work, they produce different results, depending on cMake version, one file or several. This is not that important as long as they work, but that's the issue.
Can somebody shed light on this mystery?
I need to build libpng, but without #define PNG_READ_eXIf_SUPPORTED in pnglibconf.h
I've read comments from pnglibconf.dfa, and here are some ways of disabling features, however I didn't manage to make what I want using them.
The problem is in that, build process is performed on build server, so I can't change any files inside of libpng submodule. Here is how server works:
Download clone sources from git
Generate makefile by running cmake ..
Run make command.
Thus I have libnpg, but with included PNG_READ_eXIf_SUPPORTED option.
Libpng is a submodule of my project, so it checked out by build server automatically so I can't change pnglibconf manually.
As it said in pnglibconf.dfa file:
There are three ways of disabling features, in no particular order:
1) Create 'pngusr.h', enter the required private build information
detailed below and #define PNG_NO_<option> for each option you
don't want in that file in that file. You can also turn on options
using PNG_<option>_SUPPORTED. When you have finished rerun
configure and rebuild pnglibconf.h file with -DPNG_USER_CONFIG:
make clean
CPPFLAGS='-DPNG_USER_CONFIG' ./configure
make pnglibconf.h
pngusr.h is only used during the creation of pnglibconf.h, but it
is safer to ensure that -DPNG_USER_CONFIG is specified throughout
the build by changing the CPPFLAGS passed to the initial ./configure
I tried to do what is written here. I run cmake .. -DCMAKE_C_FLAGS="-DPNG_USER_CONFIG -I/home/me/dev/include" where /home/me/dev/include - is a path to pngusr.h file
Then I run make command. However, PNG_READ_eXIf_SUPPORTED is still present in generated (by make command pnglibconf.h file).
So my main question is how to make libpng without PNG_READ_eXIf_SUPPORTED option?
It remains unclear to me whether and to what extent the specific customization mechanism you are trying to use works in the version of libpng you are trying to use. But it looks like there's a simpler way. Just below the excerpt you posted, in the same file, is the second (of three) alternatives:
2) Add definitions of the settings you want to change to CPPFLAGS;
for example:
-DPNG_DEFAULT_READ_MACROS=0
(lightly formatted). I'm not in a good position to test that on the CMake-based build system, but it seems to work like a charm in the Autotools build system. From examining and comparing the two, I think it will work for CMake, too. In particular, you would want to run
cmake .. -DCMAKE_CPP_FLAGS="-DPNG_NO_READ_eXIf"
for your particular case.
Note, by the way, that the CPP (i.e. preprocessor) flags are the right place for an option such as you are specifying (for -DPNG_USR_CONFIG in your original attempt, too). In practice, though, they probably still work in the C compiler flags.
So some background, I'm installing Node on a host server, but it's a grid server not a server that's solely for my website.
The grid server doesn't have a root user/ administrative powers. So to install node I found this workaround: http://iantearle.com/blog/media-temple-grid-and-nodejs . It's a Linux Grid server, I've never used Linux so if someone could explain to me what the commands mean, especially: ./configure --prefix=~/opt/
Lastly I followed the steps but when I try to run the node command in the server it says node:command not found - which is why I'm trying to understand the steps. Thanks
To explain the process:
Configure
The configure script is responsible for getting ready to build the software on your specific system. It makes sure all of the dependencies for the rest of the build and install process are available, and finds out whatever it needs to know to use those dependencies.
Unix programs are often written in C, so we’ll usually need a C compiler to build them. In these cases the configure script will establish that your system does indeed have a C compiler, and find out what it’s called and where to find it.
Make
Once configure has done its job, we can invoke make to build the software. This runs a series of tasks defined in a Makefile to build the finished program from its source code.
The tarball you download usually doesn’t include a finished Makefile. Instead it comes with a template called Makefile.in and the configure script produces a customised Makefile specific to your system.
3.Make Install
Now that the software is built and ready to run, the files can be copied to their final destinations. The make install command will copy the built program, and its libraries and documentation, to the correct locations.
--prefix=~/opt/ -> will set the build directory to /home/yourhome/opt directory.
Now if you didnt get errors while doing those 3 steps explained above make sure you did the following:
nano ~/.bash_profile
export PATH=~/opt/bin:${PATH}
nano is a text editor and you are opening .bash_profile file with it.
you need to add export PATH=~/opt/bin:${PATH} in that file and save it using ctrl+x
Then restart your terminal.
Specified github repository for nodejs is outdated. use the following link instead.
git clone https://github.com/nodejs/node.git
P.S node:command not found usually happens when the program is not installed correctly or it's executable isnt in your terminal's PATH variable.
Bear with me, this one's not very easy to explain...
I'm trying to configure, make and make install Xfce into my buildroot build directory. When configuring I'm using
--prefix=/home/me/somefolder/mybuild/output/target
so that it builds to the right folder, however when it's compressed and run I get errors from various config files where it's looking for files in
/home/me/somefolder/mybuild/output/target
(which of course doesn't exist.)
How do I set what folder to build into, yet set a different root directory for the config files to use?
Do configure --help and see what other options are available.
It is very common to provide different options to override different locations. By standard, --prefix overrides all of them, so you need to override config location after specifying the prefix. This course of actions usually works for every automake-based project.
The worse case scenario is when you need to modify the configure script, or even worse, generated makefiles and config.h headers. But yeah, for Xfce you can try something like this:
./configure --prefix=/home/me/somefolder/mybuild/output/target --sysconfdir=/etc
I believe that should do it.
In my situation, --prefix= failed to update the path correctly under some warnings or failures. please see the below link for the answer.
https://stackoverflow.com/a/50208379/1283198
I have seen that while installing new software in Linux, I always have to use first configure it.
But sometimes we need to pass various options like I did today to install lxml:
./configure --with-python=/opt/python27/bin/python
--prefix=/usr/local
--with-libxml-prefix=/usr/local
--with-libxml-include-prefix=/usr/local/include
--with-libxml-libs-prefix=/usr/local/lib
Now I want to know that how will the person know that what type of paramaters like --with-python can be used?
I mean:
Are those parameters same across all software packages or they vary software to software?
I even tried to read documentation as well, but no one mentions those parameters.
./configure --help
That will show you all options for that particular configure script.
Some are the same across all configure scripts produced by Autoconf (which is most of them, but not all); for instance --prefix is basically universal. Others are peculiar to the particular configure script.
./configure --help is always helpful. But I would say more about that in some packages not only is there a configure script in the top source directory but also the possible subdirectories. So, for knowing all possible parameters which can be passed to the configure script in the top source directory you should also have a look at the configure scripts in each possible subdirectory.
For example, in the top source directory of binutils-2.34 tarball there are --with-sysroot and --with-lib-path parameters with configure script. If you type ./configure --help under the top source directory, there are no document items for both of them because they are documented in the configure script under the subdirectory ld/. So you should type ./ld/configure --help.
I know about configure --help but the information provided is "light". The following GNU resources contain useful additional information:
Installation directory variables
Release process