I have a tar file which is 3.1 TB(TeraByte)
File name - Testfile.tar
I would like to split this tar file into 2 parts - Testfil1.tar and Testfile2.tar
I tried the following so far
split -b 1T Testfile.tar "Testfile.tar"
What i get is Testfile.taraa(what is "aa")
And i just stopped my command. I also noticed that the output Testfile.taraa doesn't seem to be a tar file when I do ls in the directory. It seems like it is a text file. May be once the full split is completed it will look like a tar file?
The behavior from split is correct, from man page online: http://man7.org/linux/man-pages/man1/split.1.html
Output pieces of FILE to PREFIXaa, PREFIXab, ...
Don't stop the command let it run and then you can use cat to concatenate (join) them all back again.
Examples can be seen here: https://unix.stackexchange.com/questions/24630/whats-the-best-way-to-join-files-again-after-splitting-them
split -b 100m myImage.iso
# later
cat x* > myImage.iso
UPDATE
Just as clarification since I believe you have not understood the approach. You split a big file like this to transport it for example, files are not usable this way. To use it again you need to concatenate (join) pieces back. If you want usable parts, then you need to decompress the file, split it in parts and compress them. With split you basically split the binary file. I don't think you can use those parts.
You are doing the compression first and the partition later.
If you want each part to be a tar file, you should use 'split' first with de original file, and then 'tar' with each part.
Related
I have a request and a problem.
I have archived files
tar xvpf /to_arch |gzip - c | split -b10000m - /arch/to_arch.gz_
I use this comand. this is archive got my system and i need move it on other server.
on nev server i havent space for put arhive and extract it then i have idea.
Can someone help me write script in bash who can remuve extracted files.
like to_arch.gz_aa to_arch.gz_abto_arch.gz_acto_arch.gz_ad etc.
if finish extract aa file then script delete it.
cat *.gz* | tar zxvf - -i
Normaly i extract that but havent space on disk.
I'm trying to display the output of an AWS lambda that is being captured in a temporary text file, and I want to remove that file as I display its contents. Right now I'm doing:
... && cat output.json && rm output.json
Is there a clever way to combine those last two commands into one command? My goal is to make the full combined command string as short as possible.
For cases where
it is possible to control the name of the temporary text file.
If file is not used by other code
Possible to pass "/dev/stdout" as the.name of the output
Regarding portability: see stack exchange how portable ... /dev/stdout
POSIX 7 says they are extensions.
Base Definitions,
Section 2.1.1 Requirements:
The system may provide non-standard extensions. These are features not required by POSIX.1-2008 and may include, but are not limited to:
[...]
• Additional character special files with special properties (for example, /dev/stdin, /dev/stdout, and /dev/stderr)
Using the mandatory supported /dev/tty will force output into “current” terminal, making it impossible to pipe the output of the whole command into different program (or log file), or to use the program when there is no connected terminals (cron job, or other automation tools)
No, you cannot easily remove the lines of a file while displaying them. It would be highly inefficient as it would require removing characters from the beginning of a file each time you read a line. Current filesystems are pretty good at truncating lines at the end of a file, but not at the beginning.
A simple but extremely slow method would look like this:
while [ -s output.json ]
do
head -1 output.json
sed -i 1d output.json
done
While this algorithm is plain and simple, you should know that each time you remove the first line with sed -i 1d it will copy the whole content of the file but the first line into a temporary file, resulting in approximately 0.5*n² lines written in total (where n is the number of lines in your file).
In theory you could avoid this by do something like that:
while [ -s output.json ]
do
line=$(head -1 output.json)
printf -- '%s\n' "$line"
fallocate -c -o 0 -l $((${#len}+1)) output.json
done
But this does not account for variable newline characters (namely DOS-formatted newlines) and fallocate does not always work on xfs, among other issues.
Since you are trying to consume a file alongside its creation without leaving a trace of its existence on disk, you are essentially asking for a pipe functionality. In my opinion you should look into how your output.json file is produced and hopefully you can pipe it to a script of your own.
I have a ~300 GB zipped vcf file (.vcf.gz) which contains the genomes of about 700 dogs. I am only interested in a few of these dogs and I do not have enough space to unzip the whole file at this time, although I am in the process of getting a computer to do this. Is it possible to unzip only parts of the file to begin testing my scripts?
I am trying to a specific SNP at a position on a subset of the samples. I have tried using bcftools to no avail: (If anyone can identify what went wrong with that I would also really appreciate it. I created an empty file for the output (722g.990.SNP.INDEL.chrAll.vcf.bgz) but it returns the following error)
bcftools view -f PASS --threads 8 -r chr9:55252802-55252810 -o 722g.990.SNP.INDEL.chrAll.vcf.gz -O z 722g.990.SNP.INDEL.chrAll.vcf.bgz
The output type "722g.990.SNP.INDEL.chrAll.vcf.bgz" not recognised
I am planning on trying awk, but need to unzip the file first. Is it possible to partially unzip it so I can try this?
Double check your command line for bcftools view.
The error message 'The output type "something" is not recognized' is printed by bcftools when you specify an invalid value for the -O (upper-case O) command line option like this -O something. Based on the error message you are getting it seems that you might have put the file name there.
Check that you don't have your input and output file names the wrong way around in your command. Note that the -o (lower-case o) command line option specifies the output file name, and the file name at the end of the command line is the input file name.
Also, you write that you created an empty file for the output. You don't need to do that, bcftools will create the output file.
I don't have that much experience with bcftools but generically If you want to to use awk to manipulate a gzipped file you can pipe to it so as to only unzip the file as needed, you can also pipe the result directly through gzip so it too is compressed e.g.
gzip -cd largeFile.vcf.gz | awk '{ <some awk> }' | gzip -c > newfile.txt.gz
Also zcat is an alias for gzip -cd, -c is input/output to standard out, -d is decompress.
As a side note if you are trying to perform operations on just a part of a large file you may also find the excellent tool less useful it can be used to view your large file loading only the needed parts, the -S option is particularly useful for wide formats with many columns as it stops line wrapping, as is -N for showing line numbers.
less -S largefile.vcf.gz
quit the view with q and g takes you to the top of the file.
I'm trying to decompress ~8GB .zip file piped from curl command. Everything I have tried is being interrupted at <1GB and returns a message:
... has more than one entry--rest ignored
I've tried: funzip, gunzip, gzip -d, zcat, ... also with different arguments - all end up in the above message.
The datafile is public, so it's easy to repro the issue:
curl -L https://archive.org/download/nycTaxiTripData2013/faredata2013.zip | funzip > datafile
Are you sure the mentioned file deflates to a single file? If it extracts to multiple files you unfortunately cannot unzip on the fly.
Zip is a container as well as compression format and it doesn't know where the new file begins. You'll have to download the whole file and unzip it.
I have list of gzip files:
file1.gz
file2.gz
file3.gz
Is there a way to concatenate or gzipping these files into one gzip file
without having to decompress them?
In practice we will use this in a web database (CGI). Where the web will receive
a query from user and list out all the files based on the query and present them
in a batch file back to the user.
With gzip files, you can simply concatenate the files together, like so:
cat file1.gz file2.gz file3.gz > allfiles.gz
Per the gzip RFC,
A gzip file consists of a series of "members" (compressed data sets). [...] The members simply appear one after another in the file, with no additional information before, between, or after them.
Note that this is not exactly the same as building a single gzip file of the concatenated data; among other things, all of the original filenames are preserved. However, gunzip seems to handle it as equivalent to a concatenation.
Since existing tools generally ignore the filename headers for the additional members, it's not easily possible to extract individual files from the result. If you want this to be possible, build a ZIP file instead. ZIP and GZIP both use the DEFLATE algorithm for the actual compression (ZIP supports some other compression algorithms as well as an option - method 8 is the one that corresponds to GZIP's compression); the difference is in the metadata format. Since the metadata is uncompressed, it's simple enough to strip off the gzip headers and tack on ZIP file headers and a central directory record instead. Refer to the gzip format specification and the ZIP format specification.
Here is what man 1 gzip says about your requirement.
Multiple compressed files can be concatenated. In this case, gunzip will extract all members at once. For example:
gzip -c file1 > foo.gz
gzip -c file2 >> foo.gz
Then
gunzip -c foo
is equivalent to
cat file1 file2
Needless to say, file1 can be replaced by file1.gz.
You must notice this:
gunzip will extract all members at once
So to get all members individually, you will have to use something additional or write, if you wish to do so.
However, this is also addressed in man page.
If you wish to create a single archive file with multiple members so that members can later be extracted independently, use an archiver such as tar or zip. GNU tar supports the -z option to invoke gzip transparently. gzip is designed as a complement to tar, not as a replacement.
Just use cat. It is very fast (0.2 seconds for 500 MB for me)
cat *gz > final
mv final final.gz
You can then read the output with zcat to make sure it's pretty:
zcat final.gz
I tried the other answer of 'gz -c' but I ended up with garbage when using already gzipped files as input (I guess it double compressed them).
PV:
Better yet, if you have it, 'pv' instead of cat:
pv *gz > final
mv final final.gz
This gives you a progress bar as it works, but does the same thing as cat.
You can create a tar file of these files and then gzip the tar file to create the new gzip file
tar -cvf newcombined.tar file1.gz file2.gz file3.gz
gzip newcombined.tar