I typed in Vim :CocInstall coc-clangd
Complains about clangd is not installed
sudo apt-get install clangd-10, also i installed clangd-9
still same error appears
reboot
still same error
clangd is not found, you need to install clangd first
Is there something that I miss and you want to know guys?
clangd-10 will be installed as clangd-10, try this: sudo update-alternatives --install /usr/bin/clangd clangd /usr/bin/clangd-10 100. https://clangd.llvm.org/installation.html
Make sure clangd can been found from $PATH, check: which clangd or clangd --version
❯ clangd --version
clangd version 10.0.0
Related
I recently set up an AWS EC2 Linux instance, and I'm trying to install boost using the following code:
wget -c
http://sourceforge.net/projects/boost/files/boost/1.66.0/boost_1_66_0.tar.bz2
tar jxf boost_1_66_0.tar.bz2
cd boost_1_66_0
sudo ./bootstrap.sh --prefix=/usr/local/
./b2
sudo ./b2 install
When I run this, I get the following:
error: toolset gcc initialization:
error: no command provided, default command 'g++' not found
error: initialized from project-config.jam:12
Also, when I tried installing g++, which I thought I had already done by issuing this:
sudo yum install gcc-c++
The result:
Package gcc-c++-4.8.5-1.22.amzn1.noarch already installed and latest version
Nothing to do
On AWS Linux the way to go is described here: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/compile-software.html
Or execute command:
sudo yum groupinstall "Development Tools"
This should help.
It seems like you are missing other build tools required for compiling. Installing following should fix your problem,
sudo yum install -y gcc libxml2-devel gcc-c++ make
You can uninstall the tools afterwards.
I just install a kali-linux， and trying to play with it.
I did use ubuntu before. That cause some problems with different gcc version when I am trying to use some code what I build in my old Ubuntu.
I check the gcc -v; the kali give me
gcc version 6.1.1 20160802(Debian 6.1.1-11)
and ubuntu give me
gcc version 5.4.0 20160609 (ubuntu 5.4.0-6ubuntu1~16.04.2)
I am not sure if my code doesn't compile because of this or not. But just want to check.
how can I remove Debian's gcc and switch to ubuntu one?
May be i'm not much familiar with debian. But with Ubuntu, i've followed this and changed the gcc version. May be this will help.
Change default gcc version
You can use this command to install gcc versions.
sudo apt-get install gcc-4.3 gcc-4.4
Once installed, you have to update the alternatives with the variant gcc versions. Using
sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.3 10
You can choose which version of gcc, you can use by this command.
sudo update-alternatives --config gcc
I use Debian 7.4 Wheezy. I trying to upgrade my kernel, but when I type "make menuconfig" it says:
*** Unable to find the ncurses libraries or the
*** required header files.
*** 'make menuconfig' requires the ncurses libraries.
***
*** Install ncurses (ncurses-devel) and try again.
***
make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1
make: *** [menuconfig] Error 2
I trying to install "libncurses5-dev", but I get the error:
E: Unable to locate package libncurses5-dev
P.S.
I downloaded and installed the packages manually and now everything is okay!
Thanks a lot!!
You should have run (as root)
aptitude update
aptitude search libncurses
that would suggest you the right package name.
Then try
aptitude install libncurses-dev
and
aptitude install kernel-package
aptitude build-dep linux-image linux-image-amd64
At last, use make-kpkg --initrd binary to compile your kernel. (it will produce *.deb files in the parent directory). You want to configure /etc/kernel-pkg.conf and perhaps /etc/kernel-img.conf
I had the same problem. In my case installation of package libncursesw5-dev solved the issue.
make menuconfig needs ncurses libraries try following command to install ncurses library
sudo apt-get install libncurses5
sudo apt-get install libncurses5-dev
make menuconfig
worked for me after i installed all the libaries, and added myself sudo permission, i was also using this to cross_compile stuff
# Allow members of group sudo to execute any command
%sudo ALL=(ALL:ALL) NOPASSWD:ALL
%b37399 ALL=(ALL:ALL) NOPASSWD:ALL
For Fedora(Red Hat);
$ make menuconfig
#error encountered :
make[1]: *** [scripts/kconfig/Makefile:210: scripts/kconfig/mconf-cfg] Error 1
make: *** [Makefile:588: menuconfig] Error 2
#resolution :
$ sudo yum install libncurses-dev
Thanks
Depending on the project the menuconfig could be made with the kconfiglib library:
https://pypi.org/project/kconfiglib/
For these projects it's required to:
Install Python (I tested it with Python2.7, but I think newer Pythons are just fine)
Install pip (if it's not done with Python)
And then the pip install kconfiglib
And for some projects, this will fix the error instead of the libcurses package.
Just as example here is one kconfiglib based project which prints the same error, but will not be fixed with libcurse:
https://github.com/polarfire-soc/hart-software-services
Please point out the point that I am missing:
openSUSE 11.3
xx#linux-y3pi:~/Desktop/R> sudo R CMD INSTALL rgdal_0.7-12.tar.gz
root's password:
* installing to library ‘/usr/lib64/R/library’
* installing *source* package ‘rgdal’ ...
** package ‘rgdal’ successfully unpacked and MD5 sums checked
configure: gdal-config: gdal-config
checking gdal-config usability... ./configure: line 1353: gdal-config: command not found
no
Error: gdal-config not found
The gdal-config script distributed with GDAL could not be found.
If you have not installed the GDAL libraries, you can
download the source from http://www.gdal.org/
If you have installed the GDAL libraries, then make sure that
gdal-config is in your path. Try typing gdal-config at a
shell prompt and see if it runs. If not, use:
--configure-args='--with-gdal-config=/usr/local/bin/gdal-config'
with appropriate values for your installation.
ERROR: configuration failed for package ‘rgdal’
* removing ‘/usr/lib64/R/library/rgdal’
xx#linux-y3pi:~/Desktop/R> whereis gdal-config
gdal-config: /usr/local/bin/gdal-config
xx#linux-y3pi:~/Desktop/R> gdal-config
Usage: gdal-config [OPTIONS]
Options:
[--prefix[=DIR]]
[--libs]
[--dep-libs]
[--cflags]
[--datadir]
[--version]
[--ogr-enabled]
[--formats]
xx#linux-y3pi:~/Desktop/R>
> sessionInfo()
R version 2.15.1 (2012-06-22)
Platform: x86_64-unknown-linux-gnu (64-bit)
locale:
[1] LC_CTYPE=en_US.UTF-8 LC_NUMERIC=C
[3] LC_TIME=en_US.UTF-8 LC_COLLATE=en_US.UTF-8
[5] LC_MONETARY=en_US.UTF-8 LC_MESSAGES=en_US.UTF-8
[7] LC_PAPER=C LC_NAME=C
[9] LC_ADDRESS=C LC_TELEPHONE=C
[11] LC_MEASUREMENT=en_US.UTF-8 LC_IDENTIFICATION=C
attached base packages:
[1] stats graphics grDevices utils datasets methods base
>
xx#linux-y3pi:~/Desktop/R> gdal-config --version
1.9.0
xx#linux-y3pi:~/Desktop/R> proj
Rel. 4.8.0, 6 March 2012
usage: proj [ -beEfiIlormsStTvVwW [args] ] [ +opts[=arg] ] [ files ]
linux-y3pi:~ # $PATH
bash: /home/xx/qtsdk-2010.05/qt/bin/:/home/xx/qtsdk-2010.05/bin:/home/xx/qtsdk-2010.05/qt/bin:/home/xx/qtsdk-2010.05/qt/bin/:/home/xx/qtsdk-2010.05/bin:/usr/lib64/mpi/gcc/openmpi/bin:/home/xx/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games: No such file or directory
In Ubuntu 18.04
I fixed this by sudo apt install libgdal-dev
Hope someone find this helpful. Some above answers seems to be outdated and lengthy.
In earlier versions (which had apt-get)
sudo apt-get install libgdal-dev
You need the -dev package with headers and shared library links for development besides the normal package for deployment. Two different use cases as far as the distro is concerned.
On my distribution:
edd#max:/tmp$ dpkg -l | grep gdal | cut -c-72
ii libgdal1-1.7.0 1.7.3-6ubuntu3
ii libgdal1-dev 1.7.3-6ubuntu3
edd#max:/tmp$
and R CMD INSTALL rgdal_0.7-8.tar.gz works just fine as you would expect from a CRAN package given all the build-time checks at CRAN.
Update late 2016: As #JoshO'Brien points out in the comment
Minor update: Here in 2016, running Ubuntu 14.04.2, libgdal1h seems to
have replaced libgdal1(though libgdal1-dev is still needed). At least
I get an error to that effect when I attempted to apt-get install libgdal1
For Ubuntu 16.04 the corresponding line would be
sudo apt-get install libgdal1i
Such renaming of upstream libraries is common; something such as apt-cache search libgdal can help locate the current package names. The important key though is that the "abstract" development package libgdal-dev is all that is needed to build as it pulls the "concrete" current run-time package (here: libgdal1i) in via a dependency.
You can use apt-file package, to find which package contains the missing file you are looking for.
First install the apt-file using the command apt-get install apt-file Update apt-file using the command apt-file update Now you can use apt-file to find the missing file. apt-file search gdal-config
For my case, I got the same error when configuring grass-7.1 from svn. As shown below:
$ ./configure
...more...
checking whether to use GDAL... yes
checking for gdal-config... /usr/bin/gdal-config
...more....
./configure: 1: ./configure: /usr/bin/gdal-config: not found
./configure: 6093: test: =: unexpected operator
configure: error: *** Unable to locate GDAL library.
But, after looking for gdal-config file with apt-file as shown below, I was able to resolve the error, after installing the package libgdal1-dev
$ apt-file search gdal-config
Results
libgdal1-dev: /usr/bin/gdal-config
So I installed libgdal1-dev, as shown below:
$ sudo apt-get install libgdal1-dev
This happens because the configuration failed for package ‘rgdal’
so we have to install necessary dependencies.
The packages libgdal-dev and libproj-dev are required:
sudo apt-get install gdal-bin proj-bin libgdal-dev libproj-dev
Then install rgdal by
install.packages("rgdal")
Load rgdal by
library(rgdal)
On macOS
brew install gdal
removed the error
gdal-config not found
Try this on CentOS 6
sudo yum install gdal gdal-python gdal-devel mapserver mapserver-python libxml2 libxml2-python python-lxml python-pip python-devel gcc
Read the reference manual.
SystemRequirements for building from source: GDAL >= 1.6.0 library
from http://trac.osgeo.org/gdal/wiki/DownloadSource and PROJ.4 (proj
>= 4.4.9) from http://trac.osgeo.org/proj/;
The same problem occurred today to me on a Linux CentOS 6.10 on which I do not have administration rights.
What I did:
a) Create a conda environment dedicated to my R version
conda create --name MYR
b) Activate the environment
source activate MYR
c) Install R
conda install -c conda-forge r-base
d) Install libgdal
conda install -c conda-forge libgdal
This solved the problem for me. My R version was 4.1.3. I guess other versions should work.
For manjora or archlinux, just try:
yay -S gdal
I can't figure out what is going wrong here -- any ideas??
I'm running on a Ubuntu 8.04 LTS, and have installed libxml2 and libxslt from these instructions:
http://www.techsww.com/tutorials/libraries/libxml/installation/installing_libxml_on_ubuntu_linux.php
http://www.techsww.com/tutorials/libraries/libxslt/installation/installing_libxslt_on_ubuntu_linux.php
However, I installed the latest versions:
libxslt-1.1.24
libxml2-2.7.3
The install was uneventful
-------------------- I set LD_LIBRARY_PATH ----------------------------------
echo $LD_LIBRARY_PATH
/usr/local/libxslt/lib:
------------- seems like the function is present -- at least based on the output of strings ------------
/usr/local/libxslt/lib$ strings * | grep ParseStylesheetDoc
xsltParseStylesheetDoc
xsltParseStylesheetDoc
xsltParseStylesheetDoc
xsltParseStylesheetDoc
xsltParseStylesheetDoc
xsltParseStylesheetDoc
xsltParseStylesheetDoc
----------------------- But the compile still fails ----------------------------------------
sudo gem install webrat
Building native extensions. This could take a while...
ERROR: Error installing webrat:
ERROR: Failed to build gem native extension.
/usr/local/bin/ruby extconf.rb install webrat
checking for iconv.h in /opt/local/include/,/opt/local/include/libxml2,/opt/local/include,/opt/local/include,/opt/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/include,/usr/include/libxml2... yes
checking for libxml/parser.h in /opt/local/include/,/opt/local/include/libxml2,/opt/local/include,/opt/local/include,/opt/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/include,/usr/include/libxml2... yes
checking for libxslt/xslt.h in /opt/local/include/,/opt/local/include/libxml2,/opt/local/include,/opt/local/include,/opt/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/include,/usr/include/libxml2... yes
checking for libexslt/exslt.h in /opt/local/include/,/opt/local/include/libxml2,/opt/local/include,/opt/local/include,/opt/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/local/include,/usr/local/include/libxml2,/usr/include,/usr/include/libxml2... yes
checking for xmlParseDoc() in -lxml2... yes
checking for xsltParseStylesheetDoc() in -lxslt... no
libxslt is missing. try 'port install libxslt' or 'yum install libxslt-devel'
*** extconf.rb failed ***
Could not create Makefile due to some reason, probably lack of
necessary libraries and/or headers. Check the mkmf.log file for more
details. You may need configuration options.
Provided configuration options:
--with-opt-dir
--without-opt-dir
--with-opt-include
--without-opt-include=${opt-dir}/include
--with-opt-lib
--without-opt-lib=${opt-dir}/lib
--with-make-prog
--without-make-prog
--srcdir=.
--curdir
--ruby=/usr/local/bin/ruby
--with-iconv-dir
--without-iconv-dir
--with-iconv-include
--without-iconv-include=${iconv-dir}/include
--with-iconv-lib
--without-iconv-lib=${iconv-dir}/lib
--with-xml2-dir
--without-xml2-dir
--with-xml2-include
--without-xml2-include=${xml2-dir}/include
--with-xml2-lib
--without-xml2-lib=${xml2-dir}/lib
--with-xslt-dir
--without-xslt-dir
--with-xslt-include
--without-xslt-include=${xslt-dir}/include
--with-xslt-lib
--without-xslt-lib=${xslt-dir}/lib
--with-xml2lib
--without-xml2lib
--with-xsltlib
--without-xsltlib
Gem files will remain installed in /usr/local/lib/ruby/gems/1.8/gems/nokogiri-1.3.3 for inspection.
Results logged to /usr/local/lib/ruby/gems/1.8/gems/nokogiri-1.3.3/ext/nokogiri/gem_make.out
In Ubuntu you need to follow these steps:
sudo apt-get install libxml2-dev
sudo apt-get install libxslt-dev
Jared Evans in this post on his blog, described a solution that worked for me on Ubuntu 8.04 LTS. His trick is to NOT use apt-get to install rubygems, but rather to build it from source. This worked great for me. His post is directed at installing rails, so I used these (modified slightly) steps from it to just install nokogiri:
FIRST INSTALL RUBY WITH APT-GET:
sudo apt-get update
sudo apt-get install ruby irb ri rdoc ruby1.8-dev libzlib-ruby
libyaml-ruby libreadline-ruby libncurses-ruby libcurses-ruby libruby
libruby-extras libfcgi-ruby1.8 build-essential libopenssl-ruby
libdbm-ruby libdbi-ruby libdbd-sqlite3-ruby sqlite3 libsqlite3-dev
libsqlite3-ruby libxml-ruby libxml2-dev
IN ADDITION TO JARED'S INSTRUCTIONS I ALSO INSTALLED (I'm not certain that libxslt1.1 is necessary):
sudo apt-get install libxslt1.1
sudo apt-get install libxslt1-dev
DOWNLOAD RUBYGEMS SOURCE:
Download the latest RubyGems (currently 1.3.6) from rubyforge (I used the zip package).
BUILD RUBYGEMS:
cd /TO/DIRECTORY/WHERE/YOU/UNZIPPED/rubygems-1.3.6/
sudo ruby setup.rb
sudo ln -s /usr/bin/gem1.8 /usr/bin/gem
INSTALL NOKOGIRI:
sudo gem update –system
sudo gem install nokogiri
The response will be:
1 gem installed
Installing ri documentation for nokogiri-1.4.1...
No definition for parse_memory
No definition for parse_file
No definition for parse_with
No definition for get_options
No definition for set_options
Installing RDoc documentation for nokogiri-1.4.1...
No definition for parse_memory
No definition for parse_file
No definition for parse_with
No definition for get_options
No definition for set_options
I haven't yet noticed any problems caused by the 'No definition' messages...
Try removing the libxslt* and install them again. That fixed the issue for me.
You have to install the development kits of these libraries.
I get the same error when trying to install to a non-standard location (as I don't have access to directories outside my home directory). It seems as if this answer simply installed to the default location in /usr for success. Or did I misunderstand?
More context about what I'm trying to do at http://groups.google.com/group/nokogiri-talk/browse_thread/thread/c1e909be09e90f5a, if that's helpful.
Here's what worked for me on Ubuntu 11.04 (natty):
sudo apt-get install libxslt-dev libxml2-dev
sudo gem install nokogiri