I have a web server which contains the files for both domains
1-exemple.id and 2-exemple.info.
I want to run Wordpress on "1" and NodeJs for "2".
1" points to the directory /home/xxxxx/public_html and 2" points to the directory /home/xxxxx/public_html/xxxxx.info.
The issue here is that I have tried a couple of times to get this working. I used iptables for forwarding traffic from port 3000(NodeJs) to 80. This made it worse as the NodeJs server is now showing on both domains 1" and 2".
Looking forward to hear your suggestions.
Please note: I am using CentOs7
If you want to forward traffic to a different port you need to configure Apache as a proxy in your virtual hosts file:
ProxyPass "/" "http://127.0.0.1:3000"
ProxyPassReverse "/" "http://127.0.0.1:3000"
Make sure you activate the proxy modules for Apache:
sudo a2enmod proxy
sudo a2enmod proxy_http
Related
I have to tomcat servers running in my server. And I wanted to do a virtual host routing. So initially I tried it with one tomcat which is running in 8081 port and ajp port enabled to 8011 in the tomcat server.xml file
My conf file in the /etc/apache2/sites-available/mydomain_name.com.conf looks likes this
<VirtualHost *:80>
ProxyRequests off
ProxyPreserveHost On
ServerName mydomain_name.com
ServerAdmin ubuntu#mydomain_name.com
ProxyPass / ajp://localhost:8011/
ProxyPassReverse / ajp://localhost:8011/
</VirtualHost>
Then I did
sudo a2ensite mydomain_name.com.conf
sudo service apache reload
Every thing went find, no issues. And I also ensured the port 8011 is listening.
But when I try to access the server from my personal laptop, the request is blocked by Google chrome.
I have enabled these configurations in the server too.
sudo a2enmod proxy
sudo a2enmod proxy_ajp
sudo a2enmod proxy_http
sudo service apache2 restar
Have anyone has came across this issue ? Shedding some light would be really helpful. Because I have done some thing similar 1 year back, then this issue did not occur, and I'm only trying to direct it to the tomcat home page. Which is a bare minimal page.
After several frustrating hours found the issue. Hope this might help if any one came across this same issue.
Although the port 80 was opened via the aws management console security groups, internally the ports were firewall protected by the ip tables. So by removing the ip-tables entry for the port 80 I was able to make the virtual host work.
I've recently installed a nodejs app (keystone) app in my home/myusername/myappname directory.
When I visit www.mydomain.com, nothing displays - even after turning on my nodejs app.
Where should these files be?
I am running ubuntu 16.04.
In the past I have worked with a var/www folder, but I am not using apache - do I need to manually create this folder?
Thanks!
For your app to be visible it has to be running (obviously) and accessible on port 80 (if you want it to be available without adding a port number to the URL).
It doesn't matter where it is on the disk as long as it's running.
You don't need Apache or nginx or any other server. Your Node app may listen on port 80. But alternatively it can listen on some other port and your other server (Apache, nginx, etc.) can proxy the requests to that port.
But if your app is listening on, e.g. port 3000 then you should be able to access it as http://www.example.com:3000/.
Also, make sure that your domain is configured correctly. It's A record for IPv4 (or AAAA for IPv6) of the www subdomain should be equal to the publicly accessible IP address of your server.
And make sure that the port you use is not blocked by the firewall.
Update
To see how you can set the port with Keystone, see:
http://keystonejs.com/docs/configuration/#options-server
It can be either changed in the config or you can run your app with:
PORT=80 node yourApp.js
instead of:
node yourApp.js
but keep in mind that to use the port number below 1024 you will usually need the program to run as root (or add a special privilege which is more complicated).
It will also mean that this will be the only application that you can run on this server, even if you have more domain names.
If you don't want to run as root or you want to host more application, it is easiest to install nginx and proxy the requests. Such a configuration is called a "reverse proxy" - it's good to search for info and tutorials using that phrase.
The simplest nginx config would be something like this:
server {
listen 80;
server_name www.example.com;
location / {
proxy_pass http://localhost:3000;
}
}
You can set it in:
/etc/nginx/sites-available/default
or in a different file as e.g.:
/etc/nginx/sites-available/example
and then symlinked as /etc/nginx/sites-enabled/example
You need to restart nginx after changing the config.
You can find more options on configuring reverse proxies here:
https://www.nginx.com/resources/admin-guide/reverse-proxy/
You need to make a proxy between Apache and your Node.js application because Node.js has a built-in server. Supose your Node.js app is served on 9000 port. Then you need to make a proxy to redirect all trafic in 80 port to 9000 port where the Node.js app is running.
1. Enable mod_proxy
You can do this through a2enmond.
sudo a2enmod proxy
sudo a2enmod proxy_http
2. Set the proxy
Edit the /etc/apache2/sites-available/example.com.conf file and add the following lines:
ProxyRequests Off
Order deny, allow from All
ProxyPass / http://0.0.0.0:9000 ProxyPassReverse / http://0.0.0.0:9000
This basically say: "Redirect all traffic from root / to http://0.0.0.0:9000. The host 0.0.0.0:9000 is where your app is running.
Finally restart apache to enable changes.
i know this can be done with mod_rewrite or mod_proxy, if i'm correct..
but the problem is that i've tried so many times without success.
My problem is that i have a server mapped on 192.168.1.110, with two open ports (80 apache2 and 8080 tomcat)
I want to install something like shellinabox that runs on port 4200, and redirect it to a apache2 alias like : http://mywebsite.com/shellinabox
without having to open port 4200 on my router.
How to do that?
Any working solution?
Thanks
I bought some domains at godaddy.com (i.e mydomain.com) for my droplet at digitalocean.com (i.e 199.216.110.210). I run a nodejs application on port 80 on the droplet. From godaddy.com, I forward with masking mydomain.com to 199.216.110.210 and I could see may app.
Now I want to run on 199.216.110.210 several node applications on different ports, using ngnix as reverse proxy. I followed the instructions here (www.digitalocean.com/community/articles/how-to-host-multiple-node-js-applications-on-a-single-vps-with-nginx-forever-and-crontab).
My nginx .conf file is
server {
listen 80;
server_name mydomain.com;
location / {
proxy_pass http://localhost:3000;
# same as in the link above
}
}
(and I am sure it is read: when ngnix start if I put an error there, ngnix reports it).
I start the nodejs application on port 3000:
I try mydomain.com, but ngnix shows always the welcome page.
Also doing mydomain.com: 3000 does not work,
it works only with 199.216.110.210:3000.
From godaddy.com, if I forward with masking the mydomain.com to 199.216.110.210:3000 I can see may app.
But I do not like this solution. I would like domains pointing to my droplet, without specifing the port and admin them with nginx.
How can I get a domain name to use with ngnix as reverse proxy to select my apps, mapped on different domains on different ports? I suppose that forwarding from godaddy.com is somehow limited.
In your server go to /var/log/nginx and do a tail -F *log. Now in another shell restart nginx.
I suspect that your domain name is too long and nginx will complain about its hash_bucket_size is too small. If this is the case open /etc/nginx/nginx.conf and make sure that the line
server_names_hash_bucket_size 64;
exists, has a value of 64 and is uncommented. Then do sudo service nginx reload, and check if all works as expected.
I am going to detail step by step how I am able to do it in my aws ec2 instance;
I set up a DNS record to my instance, so i can set mydomain.com to 192.168.123.123 (my specific IP).
Inside my instance I have forever running my node.js app in port 3000 (I test it work by issuing curl localhost:3000 from the command line)
I then download this .sh file in order to properly intantiate nginx; curl -o nginxStarter.sh https://gist.githubusercontent.com/renatoargh/dda1fbc854f7957ec7b3/raw/c0bc1a1ec76e50cdb4336182c53a0b222edb6c0e/start.sh
I configure nginx with this configuration file. Put this file in; /etc/nginx/nginx.conf
Start nginx with this command; sudo sh nginxStarter.sh start
PS.: For multiple apps just replicate the lines that routes the requests to specific ports, very easy...! If not needed you can eliminate lines regarding out SSL.
I am building a SAAS product which is hosted on abc.com and i will have few clients with domains client1.com, client2.org, client3.in etc.
Now i want to serve my application to each client on their domains like client1.com/app, client2.com/app, client3/com/app
I dont want to host my code on their server..There will only be 1 base code & 1 DB which will be on my site abc.com. So my entire app should run on their domain
The question is, how do I configure this ? I mean client.com will point to their server but client.com/app will execute my application from my server with base url of their own domain ?
Thanks..
So i acheived this by using mod_proxy in virtual host config file of client's server by adding the following line
ProxyRequests off
ProxyPreserveHost off
ProxyPass /app http://mydomian.com
ProxyPassReverse /app http://mydomian.com
ProxyHTMLURLMap http://mydomian.com http://client.com/app
SetOutputFilter INFLATE;proxy-html;DEFLATE
It should be noted that proxy, proxy_http & proxy_html modules must be enabled which can be done by following commands
sudo a2enmod proxy
sudo a2enmod proxy_http
proxy_html might not generally be available so it can be downloaded using this command
sudo apt-get install libapache2-mod-proxy-html
Link - http://httpd.apache.org/docs/2.2/mod/mod_proxy.html