I have an Ettus E312.
I want to talk with it using the RedhawkSDR IDE.
There seems to be little documentation on this. The Redhawk manual doesn't include any tutorials. It's all just guess work to the uninitiated.
I found this setup guide on the GEON website: https://geontech.com/redhawk-sdr-and-an-ettus-e310/
However, I'm having trouble getting the device to appear under the active domain in the IDE. I have flashed the SD card, and updated the domain IP address on both omniORB files (host and USRP) as per the setup guide.
Once this is working, it is still not clear how to proceed...
Could someone please point me in the right direction??
Many thanks
The Virtual Machine NAT was confusing things!
Related
So I've been having trouble with port forwarding for my virtual box (Specifically Version 6.1) lately, I went so far as to go out and spend $180 on a new router but still nothing! I've been having this problem for weeks now and I'm slowly narrowing down the issue, It cant be my router since. You know.. Bought a new one.. So then I thought it was just Kali Linux so I tried Parrot OS and nothing, I tried BackBox6 and nothing, I tried BlackArch Linux and nothing! So it can't be the operating system, then I thought it was my laptop, I have the ASUS ROG Strix G731GT With a core i7 9th running a GTX 1650ti Graphics Card on Windows 10, I got it fixed like two months ago due to Networking issues not really related to this and after I got it back port forwarding worked for a bit then all of a sudden bloop! It stopped, I have no idea what could of caused it, I decided to use ngrok for port forwarding and that worked.. Till it didn't! That stopped working all of a sudden! at this point I thought it was my computer so I got my old school laptop (Which surprisingly ran Linux fine) and set that all up and I connected my main laptop to a hotspot, and lord and behold!... It didn't work... Nowww I got to thinking... Could it be my Virtual Box? I Don't know, I'm currently testing each and every version of Oracle VM Virtual Box right now to see if its the issue, I remember I asked a questions before about my Virtual Box not working when copying text from my host computer to the Virtual Machine and someone replied saying the version I had was a bit buggy and didn't work well and he gave me a link to a different version and it worked, this was at the time that ngrok still worked and port forwarding didn't I didn't actually test to see if port forwarding works though, now i cant find that question, he said something about guest additions I don't know, please if you know anything at all that can help me feel free to let me know and if you have any questions about my hardware or software feel free to ask I'll be refreshing my page very often lol, also if you decide to leave a comment saying this question cannot be posted how about you instead forward me to somewhere that allows these types of questions, that would be helpful -_-. Thanks.
Searched all over the place for a fix for this or even a good way to troubleshoot it. I've read the previous SO threads that seem to cover this issue but nothing in any of them has worked in my case.
Basically, I can't get access to anything that is being served via localhost on my mac in any browser on my Android device.
This is happening despite the fact they are connected to the same WIFI network and I am using the correct network address for my mac on which localhost is running (I have checked and double checked several times). I have no idea what the problem is because it worked perfectly fine before and I haven't changed anything that I believe would interfere with localhost access.
I don't have firewall or port blocking settings on my router either.
I have also tried on several different Android devices to eliminate it being a problem specific to one particular device.
Totally stumped. Any clues or hints on how to fix this would be much appreciated!
***** UPDATE *****
I tried using python -m SimpleHTTPServer 3000and it works. The site is accessible on my Android device. So I am pretty sure it is not a network issue per se.
The site is essentially a Node app which I built using the angular-quickstart template found here. It launches lite-server when npm start is run. Hope that gives some further insight into what the problem might be.
If you open up a terminal on your mac and then run the command ifconfig it will tell you what ip address all your interfaces have. It is probably your en0 interface. That ip address should be used in your browser on your Android device.
You will have to make user that you server (web) is binding to the correct ip address as well. You could be binding to all ip addresses if possible.
So I have been looking for hours to find the login to this router using upper and lower case and have got absolutely no where at all and have tried factory reset as well.
The reason I have come here for a possible solution is that I have a dump of the flash chip from the board. I bought it cheap off ebay as we have the same router at work and I am deploying some IP cams there in the near future, for the router at work we have the same problem but a call to our ISP may sort this. The seller said it was from Woav but they don't want to know as the previous owner has no account with them now neither do I.
I tried programming an OpenWrt firmware to the chip but it never booted so went back to the original image. Here is the original image for the chip (cFeon EN25Q64). From some reading it seems the systum is linux based.
https://www.dropbox.com/s/mmfbf4bu1px3tsd/Technicolor%20TG582n.rar?dl=0
If someone can help me out here it will be greatly appreciated.
Steve
I found this article flashing-generic-firmware-on-a-technicolor-tg582n which says the username is ‘Administrator’ and the password is the serial number printed on the bottom. I can confirm this for my router.
could anybody help to understand me how is it possible verify and validate server's hardware configuration that I'm going to install into datacenter? The problem is that the customer bought noname server and we need validate that configuration of it correspond to spec (validate) and make sure that all components into it are working (verify).
This is first problem. The second is that servers will be hundreds...
Sorry for the question, but I'm novice into this area so I'll be thankful for any help.
A little more details: all servers are x86-base, into the future the customer will install Linux on its.
You can use hwinfo utility for linux system for machine hardware information.
I tried to install a hardware I've installed in my previous computer under Windows 7, basically an external network card with antenna, but when I try to use it, after installed it I get this bluescreen error:
BUGCODE_NDIS_DRIVER
I don't know if it's possible to fix it, any useful information?
PS: If this isn't the best Stack forum, please guide me to the right one.
There is some technical information on Windows Dev Center - Hardware on this bugcheck. Driver developers can find the cause from the bugcheck code and parameters.
I can duplicate the BUGCODE_NDIS_DRIVER blue screen on my Windows 8.1 developer box fairly easily by opening two different VPN tunnels. Luckily, I don't need both running at the same time, so my solution is "don't do that".
For example, I open SonicWALL Global VPN Client to connect to one network. Then, I open the Cisco VPN client to connect to another. The crash happens almost immediately.
If you have two active network card, deactivate one, that is all.