I am attempting to copy column B from sheet called "Activity Overview" (Only filled cells) and paste in a sheet called "V&VFile" in column E from row 11 onwards, however when i run the macro the cells arent copied and seems to paste blank cells.
The source of the data uses excel formula index match, is this why as it can copy the data as its found from an excel formula?
Sub VVfileFILL()
Dim Lastrow As Double
Lastrow = Worksheets("Activity Overview").Cells(Rows.Count, "B").End(xlUp).Row
ThisWorkbook.Worksheets("Activity Overview").Range("B" & Lastrow).Copy
ThisWorkbook.Sheets("V&V").Range("E" & Rows.Count).End(xlUp).Offset(10, 0).PasteSpecial xlPasteValues
End Sub
Don't think one can avoid a loop in this situation.
Sub VVfileFILL()
Dim Lastrow As Long, r As Long, n As Long
n = Worksheets("V&V").Range("E" & Rows.Count).End(xlUp).Offset(10, 0).Row
With Worksheets("Activity Overview")
Lastrow = .Cells(Rows.Count, "B").End(xlUp).Row
For r = 2 To Lastrow
If Len(.Cells(r, "B")) > 0 Then 'check not blank
If WorksheetFunction.CountIf(Worksheets("V&V").Range("E1:E" & n), .Cells(r, "B")) = 0 Then 'check not already in E
Worksheets("V&V").Cells(n, "E").Value = .Cells(r, "B").Value 'transfer value
n = n + 1 'add 1 to destination row
End If
End If
Next r
End With
End Sub
Related
I am stuck i don't know what code to use so i can search the same column twice for 2 different keyword and then copy data from the same row to another spreadsheet in sequence from a start cell. for details here's what i am trying to do.
Limit the search within a range of the worksheet (ex. Sheet 1 B1:N:200)
Search the 8th column (I) of the limit range Sheet1 for keyword ("Goods")
Copy the data found in the 2nd (C) and 5th column (F) of same row where instance "Goods " is found
Paste Value of Sheet 1 - column 2 to Sheet2 - Column 3 (no format values only), and Sheet 1 column 5 to Sheet 2 Column4 (with format and values) on a specific starting point (ex. Sheet 2 - B3) Next Match Result will be Sheet 2 - B4 and so on
5.Search AGAIN the 8th column of Sheet1 for keyword ("Services") starting from the top (B1:N1)
6.Copy the data found in the 2nd (C) and 5th column (F) of same row where instance "Services" is found
Paste Value of Sheet 1 - column 2 to Sheet2 - Column 3 (no format values only), and Sheet 1 column 5 to Sheet 2 Column4 (with format and values) to next row after the last PASTE from "Goods" was done. (ex last row match paste was C35 and D35 new found value should be paste in C36 a D36)
Ending Output should be all "Goods" results first then "Services" results
I hope i have conveyed what i need clearly
I am trying to work on this code that i found here but i just don't get how to insert the 2nd search loop for services., how to paste on specific cell in sheet2, how to follow the last row for services paste
Sub CopyCells
Dim lngLastRowSht1 As Long
Dim lngLastRowSht2 As Long
Dim counterSht1 As Long
Dim counterSht2 As Long
With Worksheets(1)
lngLastRowSht1 = .Cells(.Rows.Count, 8).End(xlUp).Row
lngLastRowSht2 = Worksheets(2).Cells(Worksheets(2).Rows.Count, 5).End(xlUp).Row
For counterSht1 = 1 To lngLastRowSht1
For counterSht2 = 1 To lngLastRowSht2
If Sheets(1).Range("" & (counterSht1)).Value = "Goods" Then
Sheets(2).Range("B" & (counterSht2), "D" & (counterSht2)).Value = Sheets(1).Range("C" & counterSht1, "D" & counterSht1).Value
End If
Next counterSht2
Next counterSht1
End With
End Sub
Edit1
As per request of sir Chris this is how it should look like
Answer for this Query was best solved by #CDP1802 Worked as needed.
I learned that I needed 2 counters for it to work :) and I also learned how to properly label target destination.
Thank you for this community:)
Increment the target row after each copy.
Option Explicit
Sub CopyCells()
Const ROW_START = 3
Dim wb As Workbook, ws1 As Worksheet, ws2 As Worksheet
Dim n As Long, r As Long, lastrow1 As Long, lastrow2 as Long
Dim keywords, word, t0 As Single: t0 = Timer
keywords = Array("Goods", "Services")
Set wb = ThisWorkbook
Set ws1 = wb.Sheets(1)
Set ws2 = wb.Sheets(2)
lastrow2 = ROW_START
Application.ScreenUpdating = False
With ws1
lastrow1 = .Cells(.Rows.Count, "I").End(xlUp).Row
For Each word In keywords
For r = 1 To lastrow1
If Len(.Cells(r, "I")) = 0 Then
Exit For
ElseIf .Cells(r, "I") = word Then
'Sht1 col 2 to Sht2 Col 3 (no format values only)
'Sht1 col 5 to Sht2 Col 4 (with format and values)
ws2.Cells(lastrow2, "C") = .Cells(r, "B")
ws2.Cells(lastrow2, "D") = .Cells(r, "E")
.Cells(r, "E").Copy
ws2.Cells(lastrow2, "D").PasteSpecial xlPasteFormats
lastrow2 = lastrow2 + 1
n = n + 1
End If
Next
Next
End With
Application.ScreenUpdating = True
MsgBox r - 1 & " rows scanned " & vbLf & n & " rows copied", _
vbInformation, Format(Timer - t0, "0.0 secs")
End Sub
You could make two routines: one for services and one for goods. But that code and the code above isn't very efficient.
Since Services & Goods are in the same column, try using the autofilter:
Sheets(2).UsedRange.autofilter Field:=8, Criteria1:=Array("Goods", "Services"), VisibleDropDown:=False, Operator:=xlFilterValues
Sheets(2).UsedRange.SpecialCells(xlCellTypeVisible).Copy
Sheets(1).Range("A1").PasteSpecial
Application.CutCopyMode = False
If cell in column I1-I14 is greater than cell in column J1-J14, I want to cut the entire row and paste values to the first empty row. (From row 16 and down.)
If cell i is greater than cell j, cut row and paste values to first empty row (row 16 in this example)
This code just pastes in the first row:
Sub Knapp6_Klicka()
Dim i As Long
Dim j As Long
j = 1
For i = 3 To 500
If Cells(i, 9).Value > Cells(i, 10).Value Then
Cells(i, 12).EntireRow.Cut Sheets("Blad1").Range("A" & j)
j = j + 1
End If
Next i
End Sub
I tried to combine the paste with two different solutions.
One like this, where I recorded a macro and went to the last cell, then up to the first empty cell:
Range("A1048576").Select
Selection.End(xlUp).Select
ActiveCell.Offset(1, 0).Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False
And one solution that I found on an Excel community:
Sub compareresult()
Dim row1 As Integer
Dim row2 As Integer
row2 = 1
For row1 = 8 To 500
If sheet1.Cells(row1, 11).value > sheet1.Cells(row1, 9).value Then
sheet1.Cells(row1, 1).EntireRow.Copy Sheets(11).Cells(row2, 1)
row2 = row2 + 1
End If
Next row1
End Sub
If cell in column I1-I14 is greater than cell in column J1-J14, i want to cut entire row and paste values to the first empty row. (From row 16 and down)
Here is a method which doesn't cut and paste in a loop. Since you are not deleting the row or "cutting and inserting" the row, here is a simple approach. The below code follows a basic logic
Logic
Loop and identify the range.
If found, then copy the range in 1 go.
Finally clear the range which was copied (if copied).
Code
Option Explicit
Sub Sample()
Dim ws As Worksheet
Dim rngToCopy As Range
Dim i As Long
'~~> Change this to relevant sheet
Set ws = Sheet1
With ws
'~~> Loop and identify the range
For i = 2 To 14
If .Range("I" & i).Value2 > .Range("J" & i).Value2 Then
If rngToCopy Is Nothing Then
Set rngToCopy = .Rows(i)
Else
Set rngToCopy = Union(rngToCopy, .Rows(i))
End If
End If
Next i
'~~> If found then copy and clear
If Not rngToCopy Is Nothing Then
rngToCopy.Copy .Rows(16)
rngToCopy.Clear
End If
End With
End Sub
EDIT:
To incorporate new edits
Works perfectly! Thanks! :) I failed to fully describe my problem.. What i also need is to paste it as special (only paste the value and not the formulas). Do you got any quick solution for that? – Johl 5 hours ago
Replace
rngToCopy.Copy .Rows(16)
to
rngToCopy.Copy
DoEvents
.Rows(16).PasteSpecial Paste:=xlPasteValues
Have a try with this.
It's based on the range you gave. Skipped over row 1 since you have headers in it.
Dim i As Long, lRow As Long, ws As Worksheet
Set ws = Sheets("Blad1") 'Your sheet name
lRow = ws.Range("I" & Rows.Count).End(xlUp).Row + 1 'Finding the last row
If lRow < 16 Then lRow = 16 'The starting row you want to cut to
For i = 2 To 14 'Your range of rows to check
If ws.Range("I" & i) > ws.Range("J" & i) Then
ws.Range("I" & i).EntireRow.Cut ws.Range("A" & lRow) 'Cutting the whole row so you use column A to cut to
lRow = lRow + 1 'Move down 1 row for where to cut to
End If
Next i
Edit:
Because you only want the values to copy accross we can't use Cut and PasteSpecial xlValues so instead we will duplicate the value of the entire row to the new location, then clear the row (filling in for the cutting part). If clear is too much we can just ClearContents to remove the values in the cells instead of the formatting if that happens. Make sure to always save before running VBA code for the first time.
Dim i As Long, lRow As Long, ws As Worksheet
Set ws = Sheets("Blad1") 'Your sheet name
lRow = ws.Range("I" & Rows.Count).End(xlUp).Row + 1 'Finding the last row
If lRow < 16 Then lRow = 16 'The starting row you want to cut to
For i = 2 To 14 'Your range of rows to check
If ws.Range("I" & i) > ws.Range("J" & i) Then
ws.Range("A" & lRow).EntireRow.Value = ws.Range("I" & i).EntireRow.Value 'Copying the values over
ws.Range("I" & i).EntireRow.Clear 'Clear the row
lRow = lRow + 1 'Move down 1 row for where to cut to
End If
Next i
Your code is doomed to failure because you do not take into consideration that you are cutting the found row. Think about what that means. Your row with the In,Out is row 15 and you wish to paste to row 16. If you cut row 5 (for example) then rows 15 and 16 will become rows 14 and 15. It also means that your next row (which you think will be row 6) will actually be what was row 7 before the cut.
I have excel with 5 different sheets.
sheet3 and sheet4 i want delete rows based on the single column cell value.
in sheet 3 i want to delete rows based on H column cell values if H2="#N/A" and H503="#N/A" then delete entire rows.
in sheet 4 i want to delete rows based on b column cell values if B2="320857876",B3="32085678",B4="12133435" the delete the entire rows where B column cell values starts with 302.
and i want to delete all Data from 'C' column
My excel sheet is like this
Using excel file
Sub Create()
Dim LastRow As Long
Dim i As Long
LastRow = Range("B10000").End(xlUp).Row
For i = LastRow To 1 Step -1
If Range("B" & i) = "#N/A" Then
Range("B" & i).EntireRow.Delete
End If
Next
End Sub
You've got a few requirements there and your code is fairly light but regarding the #N/A part of it, you can't just test for that text using the value approach, which is the default property returned for a range object.
Sub Create()
Dim LastRow As Long, i As Long
LastRow = Range("B10000").End(xlUp).Row
For i = LastRow To 1 Step -1
If Range("B" & i).Text = "#N/A" Then
Range("B" & i).EntireRow.Delete
End If
Next
End Sub
... you need to use .Text to get that to work, or, If IsError(Range("B" & i)) Then is another approach.
The rest of your requirements is just logic. The rest of your code is relatively sound so you just need to work through it.
I hope that helps.
Sub delete_rows()
Dim sheet As Worksheet, cell As Range
Count = 1
For Each sheet In ThisWorkbook.Worksheets
If Count = 3 Then
lastrow = sheet.Cells(sheet.Rows.Count, "H").End(xlUp).Row
Set Rng = sheet.Range("H1:H" & lastrow)
For i = Rng.Cells.Count To 1 Step -1
If Application.WorksheetFunction.IsNA(Rng(i).Value) Then
Rng(i).EntireRow.Delete
ElseIf Rng(i).Value = "#NA" Then
Rng(i).EntireRow.Delete
End If
Next
ElseIf Count = 4 Then
lastrow = sheet.Cells(sheet.Rows.Count, "B").End(xlUp).Row
Set Rng = sheet.Range("B1:B" & lastrow)
Debug.Print (Rng(4).Text)
If Rng(2).Value = "320857876" And Rng(3).Value = "32085678" And Rng(4).Value = "12133435" Then
For i = Rng.Cells.Count To 1 Step -1
If Left(Rng(i).Value, 3) = "302" Then
Rng(i).EntireRow.Delete
End If
Next
End If
lastrow = sheet.Cells(sheet.Rows.Count, "C").End(xlUp).Row
Set Rng = sheet.Range("C1:C" & lastrow)
For Each cell In Rng
cell.Value = ""
Next cell
End If
Count = Count + 1
Next
End Sub
I am trying to copy certain column from one worksheet to another but when I apply my code, I get no errors but also no results. I get blank paper. I applied this methodolgy on copying a certain row and it was copied to another worksheet perfectly.
This is regarding the successful attempt to copy row.
The code works just fine:
Sub skdks()
Dim OSheet As Variant
Dim NSheet As Variant
Dim i As Integer
Dim LRow As Integer
Dim NSLRow As Integer
OSheet = "Tabelle3" 'Old Sheet Name
NSheet = "Tabelle5" 'New Sheet Name
LRow = Sheets(OSheet).Cells(Rows.Count, 1).End(xlUp).row 'Last Row in Old Sheet
Sheets(OSheet).Activate
For i = 2 To LRow
'Finds last row in the New Sheet
If Sheets(NSheet).Cells(2, 1) = "" Then
NSLRow = 1
Else
NSLRow = Sheets(NSheet).Cells(Rows.Count, 1).End(xlUp).row
End If
'If cell has "certain # then..."
If Cells(i, 1).Value = Cells(13, 2).Value Then
Cells(i, 1).EntireRow.Copy
Sheets(NSheet).Cells(NSLRow + 1, 1).PasteSpecial Paste:=xlPasteValues
Application.CutCopyMode = False
End If
Next i
End Sub
This little piece of code is the failed attempt to copy column to another worksheet.
Sub trial()
Dim OSheet As Variant
Dim NSheet As Variant
Dim j As Integer
Dim LColumn As Integer
Dim NSLColumn As Integer
OSheet = "Tabelle2" 'Old Sheet Name
NSheet = "Tabelle5" 'New Sheet Name
LColumn = Sheets(OSheet).Cells(1, Columns.Count).End(xlToLeft).Column 'Last Column in Old Sheet
Sheets(OSheet).Activate
For j = 2 To LColumn
'Finds last column in the New Sheet
If Sheets(NSheet).Cells(1, 2) = "" Then
NSLColumn = 1
Else
NSLColumn = Sheets(NSheet).Cells(1, Columns.Count).End(xlToLeft).Column
End If
'If cell has "certain # then..."
If Cells(2, j) = Cells(13, 2) Then
Cells(2, j).EntireColumn.Copy
Sheets(NSheet).Cells(2, 2).PasteSpecial Paste:=xlPasteValues
Application.CutCopyMode = False
End If
Next j
End Sub
....
'If cell has "certain # then..."
If Cells(2, j) = Cells(13, 2) Then
debug.Print Cells(2, j).Address; " = "; Cells(13, 2).Address; " ---- COPY"
debug.print Cells(2, j).EntireColumn.address; Cells(2, j).EntireColumn.cells.count
debug.Print Sheets(NSheet).Cells(2, 2).Address
Cells(2, j).EntireColumn.Copy
Sheets(NSheet).Cells(2, 2).PasteSpecial Paste:=xlPasteValues
Application.CutCopyMode = False
End If
....
With the line If Cells(2, j) = Cells(13, 2) Then you compare the different cells from row 2 (B2, C2, D2, ...) with the value of cell "B13". If the value is the same you copy this column to the new worksheet.
Is there any equal value in your data? If yes you should get an error message with your code.
You try to copy the values of an entire column to the range starting with "B2". Of cause there is not enough space for this.
=> Either you reduce the source range or you start the destination range on row 1!
To add to the paste destination size, if you really want to paste the entire column, you either need to start at the beginning of the column or choose the entire column. Also, I think you want to make the paste column increase with your NSLColumn
If Cells(2, j) = Cells(13, 2) Then
Cells(2, j).EntireColumn.Copy
Sheets(NSheet).Columns(NSLColumn + 1).PasteSpecial Paste:=xlPasteValues
Application.CutCopyMode = False
End If
I have two worksheets in one Excel workbook, and I only want to take the lines that have data in the cell (from worksheet1 into worksheet2) if Column A has data in it. My formula in worksheet 2 is =IF('Raw Data'!A2<>"", 'Raw Data'!A2,), but I actually don't want it to bring in the row at all if there is no data as shown in Rows 3 and 5. Right now it is bringing the whole row in:
In
you see that it is still bringing the row into worksheet 2 if there is no data. Any ideas how to only bring in the rows with the data?
Sub DataInCell()
Dim rw As Long
rw = 2
' Select initial sheet to copy from
Sheets("Raw Data").Select
' Find the last row of data - xlUp will check from the bottom of the spreadsheet up.
FinalRow = Cells(Rows.Count, 1).End(xlUp).Row
' For loop through each row
For x = 2 To FinalRow
If Cells(x, 1).Value <> 0 Then
Range("A" & x & ":C" & x).Copy
Sheets("Sheet1").Select
NextRow = Cells(Rows.Count, 1).End(xlUp).Row + 1 'Continue incrementing through the rows.
Cells(NextRow, 1).Select ' Find the next row.
ActiveSheet.Cells(NextRow, "A").PasteSpecial xlPasteAll ' Paste information.
Sheets("Raw Data").Select 'Reselect sheet to copy from. Probably uneccessary.
End If
Next x
End Sub
After you update the sheet names on the 3rd and 4th line, you will see that the code carries over the entire row. You can modify using Range(Cells, Cells) if you want partial ranges.
Option Explicit
Sub Non_Blanks()
Dim ms As Worksheet: Set ms = ThisWorkbook.Sheets("Sheet1") '<-- Master Sheet
Dim ns As Worksheet: Set ns = ThisWorkbook.Sheets("Sheet2") '<-- New Sheet
Dim i As Long, MoveMe As Range, LR As Long
For i = 2 To ms.Range("B" & ms.Rows.Count).End(xlUp).Row
If ms.Range("A" & i) = "*" Then
If Not MoveMe Is Nothing Then
Set MoveMe = Union(MoveMe, ms.Range("A" & i))
Else
Set MoveMe = ms.Range("A" & i)
End If
End If
Next i
If Not MoveMe Is Nothing Then
LR = ns.Range("A" & ns.Rows.Count).End(xlUp).Offset(1).Row
MoveMe.EntireRow.Copy
ns.Range("A" & LR).PasteSpecial xlPasteValuesAndNumberFormats
End If
End Sub