I want to capture $JAVA_HOME into a variable
I tried this:
output = $(echo $JAVA_HOME)
echo $output
I also tried :
output = $($JAVA_HOME)
echo $output
and the result for both is:
output: not found
It's not clear to my why do you want to assign value of one variable to another variable but you need to remove whitespaces around =, it should be:
output=$(echo $JAVA_HOME)
or even better and easier:
output="$JAVA_HOME"
Related
An argument is passed to bash script from outside and is read within bash file. Looks like as follows:
#following is the point from where the argument is passed to config.sh
controller.vm.provision :shell, path: 'shell/config.sh', keep_color: true, privileged: false, :args => ip
inside the config.sh reading the argument. The argument "ip" is somewhat like following:
ip = "10.12.153.26" "10.12.153.25" "10.12.153.24"
Now i want to iterate over the above argument inside the bash. so doing as follows:
array=($1) //please note $1="10.12.153.26" "10.12.153.25" "10.12.153.24"
for i in ${array[#]}
do
echo $i //it is iterated only once and output is "10.12.153.26" "10.12.153.25" "10.12.153.24"
done
So the output i am getting only once and is complete argument as it is but i want it to get displayed one by one so, that i can even use the single value separately for some other purpose. So, please suggest how can i have this?
If you want to split the value on spaces, you can do like this:
set -- $1
for i; do
echo $i
done
If the value of $i is "10.12.153.26" "10.12.153.25" "10.12.153.24",
then this will output:
"10.12.153.26"
"10.12.153.25"
"10.12.153.24"
To get rid of the double-quotes, you could use parameter expansion:
set -- $1
for i; do
echo ${i//\"/}
done
I'm practicing bash and honestly, it is pretty fun. However, I'm trying to write a program that compares an array's value to a variable and if they are the same then it should print the array's value with an asterisk to the left of it.
#!/bin/bash
color[0]=red
color[1]=blue
color[2]=black
color[3]=brown
color[4]=yellow
favorite="black"
for i in {0..4};do echo ${color[$i]};
if {"$favorite"=$color[i]}; then
echo"* $color[i]"
done
output should be *black
There's few incorrect statements in your code that prevent it from doing what you ask it to. The comparison in bash is done withing square brackets, leaving space around them. You correctly use the = for string comparison, but should enclose in " the string variable. Also, while you correctly address the element array in the echo statement, you don't do so inside the comparison, where it should read ${color[$i]} as well. Same error in the asterisk print. So, here a reworked code with the fixes, but read more below.
#!/bin/bash
color[0]=red
color[1]=blue
color[2]=black
color[3]=brown
color[4]=yellow
favorite=black
for i in {0..4};do
echo ${color[$i]};
if [ "$favorite" = "${color[$i]}" ]; then
echo "* ${color[$i]}"
fi
done
While that code works now, few things that probably I like and would suggest (open to more expert input of course by the SO community): always enclose strings in ", as it makes evident it is a string variable; when looping an array, no need to use index variables; enclose variables always within ${}.
So my version of the same code would be:
#!/bin/bash
color=("red" "blue" "black" "brown" "yellow")
favorite="black"
for item in ${color[#]}; do
echo ${item}
if [ "${item}" = "${favorite}" ]; then
echo "* $item"
fi
done
And a pointer to the great Advanced Bash-Scripting Guide here: http://tldp.org/LDP/abs/html/
I'm a few weeks into bash scripting and I haven't advanced enough yet to get my head wrapped around this problem. Any help would be appreciated!
I have a "script.conf" file that contains the following:
key1=value1
key2=${HOME}/Folder
key3=( "k3v1" "k3 v2" "k3v3")
key4=( "k4v1"
"k4 v2"
"k4v3"
)
key5=value5
#key6="Do Not Include Me"
In a bash script, I want to read the contents of this script.conf file into an array. I've learned how to handle the scenarios for keys 1, 2, 3, and 5, but the key4 scenario throws a wrench into it with it spanning across multiple lines.
I've been exploring the use of sed -n '/=\s*[(]/,/[)]/{/' which does capture key4 and its value, but I can't figure out how to mix this so that the other keys are also captured in the matches. The range syntax is also new to me, so I haven't figured out how to separate the key/value. I feel like there is an easy regex that would accomplish what I want... in plain-text: "find and group the pattern ^(.*)= (for the key), then group everything after the '=' char until another ^(.*)= match is found, rinse and repeat". I guess if I do this, I need to change the while read line to not handle the key/value separation for me (I'll be looking into this while I'm waiting for a response). BTW, I think a solution where the value of key4 is flattened (new lines removed) would be acceptable; I know for key3 I have to store the value as a string and then convert it to an array later when I want to iterate over it since an array element apparently can't contain a list.
Am I on the right path with sed or is this a job for awk or some other tool? (I haven't ventured into awk yet). Is there an easier approach that I'm missing because I'm too deep into the forest (like changing the while read line in the LoadConfigFile function)?
Here is the code that I have so far in script.sh for processing and capturing the other pairs into the $config array:
__AppDir=$(dirname $0)
__AppName=${__ScriptName%.*}
typeset -A config #init config array
config=( #Setting Default Config values
[key1]="defaultValue1"
[key2]="${HOME}/defaultFolder"
[QuietMode]=0
[Verbose]=0 #Ex. Usage: [[ "${config[Verbose]}" -gt 0 ]] && echo ">>>Debug print"
)
function LoadConfigFile() {
local cfgFile="${1}"
shopt -s extglob #Needed to remove trailing spaces
if [ -f ${cfgFile} ]; then
while IFS='=' read -r key value; do
if [[ "${key:0:1}" == "#" ]]; then
#echo "Skipping Comment line: ${key}"
elif [ "${key:-EMPTY}" != "EMPTY" ]; then
value="${value%%\#*}" # Delete in-line, right comments
value="${value%%*( )}" # Delete trailing spaces
value="${value%%( )*}" # Delete leading spaces
#value="${value%\"*}" # Delete opening string quotes
#value="${value#\"*}" # Delete closing string quotes
#Manipulate any variables included in the value so that they can be expanded correctly
# - value must be stored in the format: "${var1}". `backticks`, "$var2", and "doubleQuotes" are left as is
value="${value//\"/\\\"}" # Escape double quotes for eval
value="${value//\`/\\\`}" # Escape backticks for eval
value="${value//\$/\\\$}" # Escape ALL '$' for eval
value="${value//\\\${/\${}" # Undo the protection of '$' if it was followed by a '{'
value=$(eval "printf '%s\n' \"${value}\"")
config[${key}]=${value} #Store the value into the config array at the specified key
echo " >>>DBG: Key = ${key}, Value = ${value}"
#else
# echo "Skipped Empty Key"
fi
done < "${cfgFile}"
fi
}
CONFIG_FILE=${__AppDir}/${__AppName}.conf
echo "Config File # ${CONFIG_FILE}"
LoadConfigFile ${CONFIG_FILE}
#Print elements of $config
echo "Script Config Values:"
echo "----------------------------"
for key in "${!config[#]}"; do #The '!' char gets an array of the keys, without it, we would get an array of the values
printf " %-20s = %s\n" "${key}" "${config[${key}]}"
done
echo "------ End Script Config ------"
#To convert to an array...
declare -a valAsArray=${config[RequiredAppPackages]} #Convert the value from a string to an array
echo "Count = ${#valAsArray[#]}"
for itemCfg in "${valAsArray[#]}"; do
echo " item = ${itemCfg}"
done
As I mentioned before, I'm just starting to learn bash and Linux scripting in general, so if you see that I'm doing some taboo things in other areas of my code too, please feel free to provide feedback in the comments... I don't want to start bad habits early on :-).
*If it matters, the OS is Ubuntu 14.04.
EDIT:
As requested, after reading the script.conf file, I would like for the elements in $config[#] to be equivalent to the following:
typeset -A config #init config array
config=(
[key1]="value1"
[key2]="${HOME}/Folder"
[key3]="( \"k3v1\" \"k3 v2\" \"k3v3\" )"
[key4]="( \"k4v1\" \"k4 v2\" \"k4v3\" )"
[key5]="value5"
)
I want to be able to convert the values of elements 'key4' and 'key3' into an array and iterated over them the same way in the following code:
declare -a keyValAsArray=${config[keyN]} #Convert the value from a string to an array
echo "Count = ${#keyValAsArray[#]}"
for item in "${keyValAsArray[#]}"; do
echo " item = ${item}"
done
I don't think it matters if \n is preserved for key4's value or not... that depends on if declare has a problem with it.
A shell is an environment from which to call tools with a language to sequence those calls. It is NOT a tool to manipulate text. The standard UNIX tool to manipulate text is awk. Trying to manipulate text in shell IS a bad habit, see why-is-using-a-shell-loop-to-process-text-considered-bad-practice for SOME of the reasons why
You still didn't post the expected result of populating the config array so I'm not sure but I think this is what you wanted:
$ cat tst.sh
declare -A config="( $(awk '
{ gsub(/^[[:space:]]+|([[:space:]]+|#.*)$/,"") }
!NF { next }
/^[^="]+=/ {
name = gensub(/=.*/,"",1)
value = gensub(/^[^=]+=/,"",1)
n2v[name] = value
next
}
{ n2v[name] = n2v[name] OFS $0 }
END {
for (name in n2v) {
value = gensub(/"/,"\\\\&","g",n2v[name])
printf "[%s]=\"%s\"\n", name, value
}
}
' script.conf
) )"
declare -p config
$ ./tst.sh
declare -A config='([key5]="value5" [key4]="( \"k4v1\" \"k4 v2\" \"k4v3\" )" [key3]="( \"k3v1\" \"k3 v2\" \"k3v3\")" [key2]="/home/Ed/Folder" [key1]="value1" )'
The above uses GNU awk for gensub(), with other awks you'd use [g]sub() instead.
I have a doubt. When i declare a value and assign to some variable, I don't know how to reassign the same value to another variable. See the code snippet below.
#/bin/sh
#declare ARG1 to a
a=ARG1
#declaring $a to ARG2
ARG2=$`$a`
echo "ARG 2 = $ARG2"
It should display my output as
ARG 2 = ARG1
...but instead the actual output is:
line 5: ARG1: command not found
ARG 2 = $
To assign the value associated with the variable dest to the variable source, you need simply run dest=$source.
For example, to assign the value associated with the variable arg2 to the variable a:
a=ARG1
arg2=$a
echo "ARG 2 = $arg2"
The use of lower-case variable names for local shell variables is by convention, not necessity -- but this has the advantage of avoiding conflicts with environment variables and builtins, both of which use all-uppercase names by convention.
You may also want to alias rather than copy the variable. For example, if you need mutation. Or if you want to run a function multiple times on different variables. Here's how it works
Example:
C=cat
declare -n VAR=C
VAR+=" says Hi"
echo "$C" # prints "cat says Hi"
Example with arrays/dictionaries:
A=(a a a)
declare -n VAR=A # "-n" stands for "name", e.g. a new name for the same variable
VAR+=(b)
echo "${A[#]}" # prints "a a a b"
That is, VAR becomes effectively the same as the original variable. Instead of copying, you're adding an alias. Here's an example with functions:
function myFunc() {
local -n VAR="$1"
VAR="Hello from $2"
echo "I've set variable '$1' to value '$VAR'"
}
myFunc Inbox Bob # I've set variable 'Inbox' to value 'Hello from Bob'
myFunc Luke Leia # I've set variable 'Luke' to value 'Hello from Leia'
echo "$Luke" # Hello from Leia
Whether you should use these approaches is a question. Generally, immutable code is easier to read and to reason about (in almost any programming language). However, sometimes you really need to get stuff done in a certain way. Hope this answer helps you then.
I wrote simple script as follow
#!/bin/bash
auth_type=""
SM_Read-only="Yes"
SM_write-only="No"
echo -e ${SM_Read-only}
echo -e ${SM_Write-only}
if [ "${SM_Read-only}" == "Yes" ] && [ "${SM_Write-only}" == "Yes" ]
then
auth_type="Read Write"
else
auth_type="Read"
fi
echo -e $auth_type
And when i execute it i got following output with errors.
./script.bash: line 5: SM_Read-only=Yes: command not found
./script.bash: line 6: SM_write-only=No: command not found
only
only
Read
Any one know correct way to declare the variable with "-" (dash)?
EDIT:
have getting response from c code and evaluate the variables for example
RESP=`getValue SM_ Read-only ,Write-only 2>${ERR_DEV}`
RC=$?
eval "$RESP"
from above scripts code my c binary getValue know that script want Read-only and Write-only and return value to script.So during eval $RESP in cause error and in my script i access variable by
echo -e ${SM_Read-only}
echo -e ${SM_Write-only}
which also cause error.
Rename the variable name as follows:
SM_Read_only="Yes"
SM_write_only="No"
Please, don't use - minus sign in variable names in bash, please refer to the answer, on how to set the proper variable name in bash.
However if you generate the code, based on others output, you can simply process their output with sed:
RESP=$(getValue SM_ Read-rule,Write-rule 2>${ERR_DEV}|sed "s/-/_/g")
RC=$?
eval "$RESP"
- is not allowed in shell variable names. Only letters, numbers, and underscore, and the first character must be a letter or underscore.
I think you cant have a dash in your variables names, only letters, digits and "_"
Try:
SM_Read_only
Or
SM_ReadOnly